Sürdürülebilir Kalkınma Amaçları
Yazarlar
- Fidan, Muhammed Said(5)
- Baltacı, Cemalettin(4)
- Aygül, İmdat(3)
- Öz, Mehmet(3)
- Adanur, Hakan(2)
- Akmeşe, Osman(2)
- Alkan, Elif(2)
- Atar, Musa(2)
- Komut, Osman(2)
- Sefalı, Abdurrahman(2)
- Top, Yener(2)
- Yasar, Mehmet(2)
- Yasar, Sekip Sadiye(2)
- Yaşar, Mehmet(2)
- Yaşar, Şekip Şadiye(2)
- Akar, Zeynep(1)
- Akdogan, Arda(1)
- Akmese, Osman(1)
- Akşit, Berfin(1)
- Baltaci, Cemalettin(1)
- Cicek, Eyup(1)
- Fidan, M. Said(1)
- Gedikli, Hasan(1)
- Karapınar, Çağrı(1)
- Karpuz, Omer(1)
- Kobya, Havva N.(1)
- Muslu, Ayşe(1)
- Oz, Mehmet(1)
- Salad, Aisha Mohamud(1)
- Yasar, Ş. Şadiye(1)
- Öztürk, Şeyda(1)
- Üçüncü, Osman(1)
Yayınlar
- MakaleAçık Erişim2026Chemical Profiling of Stachys cretica subsp. anatolica Rech. f. (Endemic) Essential Oils and their Methanol Extracts with Evaluation as Enzyme Inhibitors, Antioxidant, and Antimicrobial Agents
Öz, Mehmet; Fidan, Muhammed Said; Baltacı, Cemalettin; Akmeşe, Osman; Sefalı, Abdurrahman; Aygül, İmdat
Enzyme inhibition activities, phenolic compounds, antioxidant activities, bioactive compounds, antimicrobial activities, and chemical components of essential oil and methanol extracts obtained from the aerial parts of S. cretica subsp. anatolica were investigated. The main phenolic compounds of aerial parts were catechin, oleuropein, and epicatechin. The determined enzyme inhibitor activities highlight the potential of S. cretica subsp. anatolica as a source of bioactive compounds, particularly for carbonic anhydrase and cholinesterase inhibition. The essential oil and methanol extract exhibited remarkable activities against CA-II, AChE, and BChE, although they were less potent than standard inhibitors. The essential oils generally showed stronger antimicrobial activity compared to the 30% methanol extracts across most bacterial and fungal strains, as evidenced by minimum lethal concentration (MLC) and lower minimum inhibitory concentration (MIC) values and larger inhibition zones. Chloramphenicol used alone exhibited the highest antimicrobial efficacy, with the lowest MIC and MLC values and the largest inhibition zones. The essential oils of S. cretica subsp. anatolica were determined as esters, oxygenated sesquiterpenes, and aldehydes in aerial parts. The main components were found to be hexahydrofarnesyl acetone in the aerial parts.
- MakaleAçık Erişim2026Green Synthesis and Bioactivities of Silver Nanoparticles Derived from Mercurialis annua L. Extract
Salad, Aisha Mohamud; Akar, Zeynep
Biogenic synthesis using plant materials provides a sustainable alternative to classical nanoparticle fabrication, minimizing chemical hazards and decreasing energy input. In this study, silver nanoparticles (AgNPs) were prepared using an aqueous extract of Mercurialis annua and characterized. Physicochemical properties of the AgNPs were confirmed using ultraviolet–visible spectroscopy (UV–Vis), Fourier transform infrared (FTIR) analysis, X-ray diffraction (XRD), and transmission electron microscopy coupled with energy-dispersive X-ray (TEM–EDX), which collectively indicated crystalline, spherical silver nanoparticles stabilized by extract-derived functional groups. Subsequently, the biological activities of both the nanoparticles and the extract were comparatively evaluated using antioxidant tests, including cupric ion reducing antioxidant capacity (CUPRAC), ferric reducing antioxidant power (FRAP), 2,2-diphenyl-1-picrylhydrazyl (DPPH), total phenolic content (TPC), and total flavonoid content (TFC), as well as enzyme inhibition tests targeting α-glucosidase and carbonic anhydrase. Liquid chromatography-mass spectrometry profiling identified 31 phenolic constituents in the extract, with ferulic, caffeic, salicylic, and 4-hydroxybenzoic acids detected in high abundance. Overall, the biosynthesized AgNPs demonstrated higher antioxidant performance and stronger inhibitory effects on both enzymes compared with the crude extract. These results indicate that M. annua-based AgNPs hold considerable promise sustainable and effective bioactive agents for future biomedical and biotechnological applications.
- MakaleAçık Erişim2026Chemical Profiling of Essential Oils and Evaluation of Enzyme Inhibition, Antioxidant, and Antimicrobial Activities in Both Methanol Extract and Essential Oils of Centaurea oltensis
Aygül, İmdat; Akşit, Berfin
The phytochemical composition and biological activities of Centaurea oltensis, an endemic species in Türkiye, were studied. GC–MS/FID analysis identified 128 compounds representing 99.2% of the EO, with decanoic acid (15.1%), α-pinene (7.9%), and sabinyl acetate (5.4%) as the principal constituents. GC–MS/FID analysis identified 128 compounds representing 99.2% of the essential oil (EO), with decanoic acid (15.1%), α-pinene (7.9%), and sabinyl acetate (5.4%) as the principal constituents. LC–MS/MS analysis of the methanol extract (ME) revealed high concentrations of ferulic acid (2410 µg/g dw) and chlorogenic acid (1170 µg/g dw), together with caffeic, salicylic, and 4-hydroxybenzoic acids. The ME exhibited potent carbonic anhydrase-II inhibition (IC₅₀ = 0.028 µg/mL) and significant α-glucosidase inhibition (IC₅₀ = 0.255 mg/mL). The EO showed strong acetylcholinesterase and butyrylcholinesterase inhibitory activities, with IC₅₀ values of 0.0145 µg/mL and 0.204 µg/mL, respectively. Antioxidant assays, including DPPH, ABTS, and FRAP, demonstrated superior activity of the ME, correlating with its higher phenolic and flavonoid contents. The EO displayed remarkable antibacterial activity against Staphylococcus aureus (MIC = 0.02 mg/mL) and moderate antifungal activity against Candida albicans. Overall, C. oltensis demonstrated considerable chemical diversity and promising antioxidant, antimicrobial, neuroprotective, and enzyme inhibitory potential for future pharmacological and therapeutic applications.
- MakaleAçık Erişim2026Chemical Profiling and Biological Activities of Methanol Extracts and Essential Oils From Ferulago Platycarpa Boiss. & Balansa (Endemic): Enzyme Inhibition, Antioxidant, and Antimicrobial Properties
Aygül, İmdat; Öz, Mehmet; Fidan, Muhammed Said; Baltacı, Cemalettin; Akmeşe, Osman; Sefalı, Abdurrahman
This study aimed to evaluate the phytochemical composition and biological activities of Ferulago platycarpa methanol extract (ME) and essential oil (EO). The EO was obtained via hydrodistillation and analyzed by GC-MS, revealing sesquiterpene hydrocarbons as the dominant class, with caryophyllene (65.8%) and α-pinene (9.65%) as the major constituents. The methanol extract was subjected to LC-MS/MS analysis, which identified eleven phenolic compounds, with chlorogenic acid as the most abundant. The extract showed significantly higher total phenolic (1196.22±11.64 mg GAE/100g) and antioxidant (1870.00±17.69 mg QEE/100g) contents compared to the ME. In vitro enzyme inhibition assays demonstrated that the methanol extract exhibited potent inhibitory activity against carbonic anhydrase II (CA-II, ICSO= 0.023 pg/mL), acetylcholinesterase (AChE, ICSO= 110 pg/mL), and butyrylcholinesterase (BChE, IC50= 390 pg/mL). In contrast, the EO showed higher inhibition against α-amylase (IC50= 5920±10.45 pg/mL) and BChE (IC50= 1.32±0.65 pg/mL), while its α-glucosidase showed no inhibition. Antioxidant assays indicated superior activity for the methanol extract compared to the EO. Furthermore, antimicrobial testing revealed that the EO demonstrated broader and more effective antimicrobial action, exhibiting lower MIC and MBC values against several bacterial and fungal strains. Collectively, these results highlight F. platycarpa as a valuable source of bioactive compounds with promising applications in antidiabetic, neuroprotective, antioxidant, and antimicrobial therapies.
- MakaleAçık Erişim2026Greenwashing in Wood Substitute Products: The Case of PVC Window Frames
Top, Yener
Wood is a renewable material, and advancements in machinery have made it possible to produce wood-based products in large quantities. This has led to environmental problems, which in turn have increased consumers’ environmental concern. This concern has caused consumers to prefer environmental-friendly products. Alongside green products and green marketing, greenwashing practices, which are not actually green but exploit consumer sensitivity, have also become widespread. These deceptive claims confuse consumers and provide an unfair competitive advantage against genuinely environmentally friendly products. Polyvinyl chloride (PVC) windows, which can be used as a substitute for wood windows, were chosen as a research focus, and the greenwashing practices of enterprises manufacturing PVC window were investigated. The research was conducted using deductive content analysis. The corporate websites of the enterprises were examined in terms of greenwashing. Artificial intelligence was used, but identified greenwashing types were checked by the researcher. The study found that PVC window manufacturers most frequently resorted to greenwashing involving no proof, vagueness, and hidden trade-off approaches. Greenwashing types were also examined by topics, revealing that “general environmental benefits” is the most common type.
- Derleme MakaleAçık Erişim2024Production of 5-Hydroxymethylfurfural from Non-edible Lignocellulosic Food Wastes
Muslu, Ayşe; Üçüncü, Osman; Baltacı, Cemalettin
The compound 5-(hydroxymethyl)furfural (HMF) has emerged as a versatile intermediate with the ability to undergo conversion into both fuel and a variety of platform chemicals. Lignocellulosic biomass, such as hazelnut shells and tea processing residues, was employed in this study for HMF production through two distinct methods. In the first method, cellulose from biomass was converted to sugars using a 4% acid solution, followed by catalytic conversion with NaCl/CrCl3.6H2O. After a 1-h reaction at 131 °C in a high-pressure system, HMF was obtained from tea processing waste and hazelnut shells with yields of 8.6% (82.3 mg/g) and 6.7% (66.7 mg/g), respectively. The second method involved LiCl/NaCl-doped N,N-dimethylacetamide (DMA) as an ionic solvent system for HMF production. After a 2-h reaction at 131 °C in the DMA-NaCl/[EMIM]Cl ionic solvent system, HMF was obtained from tea processing waste and hazelnut shell celluloses with yields of 5.7% (57.5 mg/g) and 3.1% (31.3 mg/g), respectively. This study contributes to the economic conversion of various food wastes into valuable chemicals, highlighting the potential of lignocellulosic biomass in sustainable chemical production.
- Derleme MakaleAçık Erişim2024Effect of Different Stabilizers and Rebaudioside A (Reb A) Sweetener on Quality Characteristics of Low-Calorie Orange Marmalade
Öztürk, Şeyda; Baltacı, Cemalettin
Low-calorie orange marmalade was produced using sugar and reb A (0.08%) or reb A-sugar free recipes with pectin (1%) and agar agar (AA) (1%) stabilizers. The physical, chemical, and sensory properties of the marmalades were evaluated. AA stabilizers increased the viscosity of the marmalades compared to pectin, but they did not affect samples with reb A. Low-calorie samples had higher L* and b* values and lower a* values than sugar-containing samples. Total sugar content in reb A samples was 8.30 to 9.28 g/100 g, and it was lower in agar samples produced in parallel with pectin. The hydroxymethyl furfural (HMF) value was lower in sugar-free recipes (3.03 to 3.62) than in sugar-containing samples. Pectin-reb A samples had favorable taste, while AA-reb A samples favored consistency among reb A-containing samples.
- MakaleAçık Erişim2024Noise as a physical risk factor in furniture industry machines
Yasar, Sekip Sadiye; Komut, Osman; Yasar, Mehmet; Fidan, Muhammed Said
This study aimed to determine the risk level of noise, which is an important physical risk, in small and medium-sized furniture industry enterprises. The noise levels of the circular sawing machines, edge banding machines, and mitre cutting machines, which are among the main processing machines of the sector, were measured. The study was carried out in 32 furniture businesses. The possible risks of noise on the operators of the machines in question and other employees were evaluated. Noise level measurements were made with the help of TESTO 815 measuring device. Dunnett’s T3 test was used to detect differences in noise levels for machine operators and other employees. It was determined that the edge banding machine does not pose an occupational health and safety risk in terms of noise risk factors. However, the mitre cutting machine and the circular sawing machine pose a risk for the machine operator in active production by creating noise above the established exposure limit value. The mitre cutting machine carries the same risk for the machine operator when it is in operation but in passive production. The results revealed the need for personal protective equipment for machine operators for mitre cutting and circular sawing machine.
- Derleme MakaleAçık Erişim2024Aflatoxin Detoxification by Biosynthesized Iron Oxide Nanoparticles Using Green and Black Tea Extracts
Gedikli, Hasan; Akdogan, Arda; Karpuz, Omer; Akmese, Osman; Kobya, Havva N.; Baltaci, Cemalettin
Researchers have recently been interested in employing nanoparticles (NPs) obtained from herbal extracts through green synthesis for various applications. This study investigated the detoxification of aflatoxins, which are toxic substances produced by molds Aspergillus flavus and Aspergillus parasiticus. The present work examined the levels of aflatoxins in hazelnut and peanut puree. Turkish black tea extract (BTE), Turkish green tea extract (GTE), green synthesized black tea-based iron oxide nanoparticles (BTFeONPs), and green tea-based iron oxide nanoparticles (GTFeONPs) were produced for aflatoxin removal. Characterizations and various antioxidant and antimicrobial activities of the tea extracts and iron oxide nanoparticles (FeONPs) were investigated. The aflatoxin levels of hazelnut puree used for this study were 6.57 ± 0.06 µg/kg for aflatoxin B1 and 13.03 ± 0.16 µg/kg for total aflatoxin, whereas the aflatoxin levels of (AFLB1) peanut puree were 7.79 ± 0.15 µg/kg for AFLB1 and 15.21 ± 0.12 µg/kg for total aflatoxin. Using soluble BTE resulted in a 40 to 50% decrease in aflatoxin levels in hazelnut and peanut purees, while soluble GTE led to a 30 to 45% decrease. Meanwhile, using BTFeONPs and GTFeONPs resulted in a 33 to 48% and 40 to 50% decrease, respectively, in aflatoxin levels in hazelnut and peanut purees.
- MakaleAçık Erişim2024Effect of Nano Particulate Preservation Materials on the Combustion Temperatures of the Wood
Yasar, Sekip Sadiye; Cicek, Eyup; Yasar, Mehmet
It is acknowledged that boron, ammonium, and nitrogenous compounds, which are used today as fire retardants, cause an increase in the hygroscopicity of wood materials. In this study, Scots pine (Pinus sylvestris L.), Anatolian chestnut (Castanea sativa Mill.), and Eastern spruce (Picea orientalis Link) woods were impregnated with 1.5% nano-sized hexagonal boron nitride (NB) according to ASTM D1413-76 (1976) standards. Flame-induced combustion (FIC), self-combustion (SC), and glowing combustion (GC) temperatures were determined. The highest retention amount was measured in spruce and the lowest was in chestnut among the wood samples taken for testing and measurement. When compared with the control samples, NB application caused an increase in SC and FIC temperatures (at higher rates). According to the glowing combustion temperature control samples, an increase was observed in chestnut and spruce and a decrease was observed in Scots pine among the samples applied with NB.
- MakaleAçık Erişim2023Chemical Content of Volatile Oil of Primula veris subsp. columnae, Obtaining the Methanol Extracts and their Biological Activities
Karapınar, Çağrı; Öz, Mehmet
The proportions and constituents of the essential oils of flowers and leaves of Primula veris subsp. columnae were determined, and the antioxidant and the antimicrobial (antibacterial and antifungal) properties of their methanol extracts were investigated. Percentage ratios and main components of the Primula veris subsp. columnae plant, which grows naturally, were detected by extracting flower and leaf volatile oils. The components of the volatile oil were identified with Gas Chromatography Mass Detector-Flame Ionization Detector (GC-MS/FID). A total of 62 compounds were identified in flower volatile oil, and methyl 4methoxysalicylate (37.1%) was determined as the main compound. While defining the structure of 50 compounds in leaf essential oil, linoleic acid (40.1%) was established as the main compound. As the result of the extraction of flowers and leaves with methanol, the extractive substance was obtained as 34.5% in flowers and as 28.8% in leaves. Methanol extraction and the antioxidant properties of the Primula veris subsp. columnae plant were quite high. In the antifungal and antibacterial activity test conducted on the volatile oils and methanol extracts of flowers and leaves of the Primula veris subsp. columnae species, only flower volatile oil showed weak inhibition properties.
- MakaleAçık Erişim2022The Economic Impacts of Covid-19 on the Forestry Sector: A Case Study in Turkey
Komut, Osman
The Covid 19 pandemic has led to considerable destruction of social and economic areas at a global level. This study aims to determine the economic impact of the Covid 19 pandemic on the Turkish forestry sector. In this context, 5 years (from 2017 to 2021) of wood-based product sales of an administrative unit, which carries out regional forestry activities in Turkey, were studied. The data concerning the product groups were subjected to a Laspeyres price index analysis based on the base period weight through the price and estimated price increase rate variables. In addition, correlation analysis was utilized to determine the relationships between the determined variables. The findings showed that the Covid 19 pandemic led to decreases in the Laspeyres price index values for the price and estimated price increase rates when compared with the pre-pandemic period, which was different on a product group’s basis. As a result, it can be said that the Covid 19 pandemic process created a considerable potential for a loss of income in wood-based products, which is one of the primary outputs of the forestry sector, and as of 2021, a recovery process has started.
- MakaleAçık Erişim2018Type, quantity, and re-use of residues in the forest products industry in Trabzon, Turkey
Top, Yener; Adanur, Hakan; Oz, Mehmet
It is necessary to know the type and quantity of wastes to select the proper applications and waste management strategies. This study investigates the type, quantity, and utilisation methods of wastes generated by micro-sized enterprises that produce timber and furniture, which are two major sub-sectors of the forest products industry in Trabzon. A total of 885 enterprises of manufacturing timber and furniture in Trabzon were identified by reviewing the records from the professional chambers of commerce. The stratified sampling method was used to compare the sub-sectors, and the sample size was determined as 120. Among these, 70 furniture- and 50 timber-producing enterprises were interviewed. The chi-square test was used to determine whether the applications of timber and furniture enterprises are dependent on each other. In general, there are no differences in waste utilisation applications and education level between the sub-sectors. The percentage of the owners/managers that received any vocational training is 77.5% in two sub-sectors. In general, engineered wood wastes are used as fuel. The majority of the owners/managers in the timber industry believe that their waste has an economic value compared to those in the furniture sector. The total amount of wood waste generated by sectors was 528 tons in a month.
- MakaleAçık Erişim2017The Technological Properties of Oriental Beech (Fagus orientalis Lipsky) Impregnated with Boron Compounds and Natural Materials
Adanur, Hakan; Fidan, Muhammed Said; Yaşar, Şekip Şadiye
Impregnation, drying, and varnishing are performed to increase the usage life of wood material by making it resistant to chemical, physical, and biological agents. The most common wood protection procedures are chemical methods. Therefore, it is essential to develop new impregnation substances that do not harm the environment and human health but are still economically efficient. In this study, oriental beech (Fagus orientalis Lipsky) was impregnated with borax and boric acid in 1%, 3%, and 5% aqueous solutions. Quechua (Caesalpinia spinosa) was also used as a natural impregnation substance. The retention amount of the impregnated samples was examined for the oven-dried density, bending strength, elastic modulus, screw holding strength tests, compression strength parallel to the grain, and Bending strength parallel to the grain. The samples impregnated with borax had higher oven-dried density, bending strength, elasticity modulus in bending, and Bending strength parallel to the grain tests than samples treated with boric acid; however, the screw holding strength tests showed the opposite trend. The screw holding strength was higher in the impregnated samples than in controls. The bending strength, the elasticity modulus in bending, and the Bending strength parallel to the grain were lower in the control samples.
- MakaleAçık Erişim2016Combustion Characteristics of Impregnated and Surface-treated Chestnut (Castanea sativa Mill.) Wood Left Outdoors for One Year
Fidan, Muhammed Said; Yaşar, Şekip Şadiye; Yaşar, Mehmet; Atar, Musa; Alkan, Elif
Treating wood with impregnating materials in order to improve resistance to burning is a commonly employed safety measure. In this study, chestnut (Castanea sativa Mill.) wood samples were impregnated using either Tanalith-E or Wolmanit-CB according to ASTM-D 1413-76 and surface-treated using water-based or synthetic varnish according to ASTM-D 3023. These samples were used to investigate the combustion characteristics of samples left outdoors for one year as detailed in ASTM-E 160-50. The combustion temperatures of the samples left outdoors were similar upon impregnation with either Tanalith-E or Wolmanit-CB. However, the combustion temperature of the samples treated with synthetic varnish was lower than those that were treated with water-based varnish. The time to collapse and the total duration of combustion of the samples left outdoors were shorter for those impregnated with Wolmanit-CB. Weight loss of the samples left outdoors was higher for those that were impregnated with Tanalith-E and treated with water-based varnish. Gas analysis of the samples that were left outdoors indicated that the O2 content of flue gas from samples that were impregnated with Wolmanit-CB and treated with synthetic varnish was high and the CO content of flue gas from the same samples was low.
- MakaleAçık Erişim2016Determining the Effect of Seasonal Variation in Spruce (Picea orientalis L.) Wood Treated with Various Impregnations on Combustion Resistance
Yasar, Ş. Şadiye; Fidan, M. Said; Yaşar, Mehmet; Atar, Musa; Alkan, Elif
Prepared test specimens were surface treated and coated with synthetic and water-based outdoor varnishes after being chemically impregnated. The test specimens were left outdoors to determine the effects of impregnation and treatment on the wood during each of the four seasons. Caucasian spruce (Picea orientalis L.) test specimens were prepared and combustion analyses were performed. As a result of the combustion test, weight loss results, as compared with the control, were 89% lower in the spring specimens, 90% lower with impregnation, and 90% lower with the synthetic varnish coating. Furthermore, the O2 amount during combustion was found to be the highest in combustion with a flame source in the winter specimens (21%). The CO2 amount was the highest in combustion without a flame source for full-year specimens (20%). The CO amount was the highest in combustion without a flame source of full-year specimens (31,787 ppm), and the NO amount was the highest during glowing of full-year specimens (55 ppm). Final results showed impregnation with Tanalith-E and water-based varnish coating to be the most effective fire protective treatments.
- DergiBioResources