Gümüşhane ÜniversitesiGümüşhane ÜniversitesiAçık Erişim Arşivi · RDL Open

Sürdürülebilir Kalkınma Amaçları

Yazarlar

Yayınlar

Yeniden eskiyeEskiden yeniye
  • MakaleYalnız künye2020
    A study on the variations of recent seismicity in and around the Central Anatolian region of Turkey

    Öztürk, S.

    Variations of the recent seismicity in and around the Central Anatolian region of Turkey were evaluated based on the seismic b-value, standard normal deviate Z-value, GENAS modelling, annual probabilities and return periods of the earthquakes. The catalog includes 16,702 earthquakes between 1974 and 2019 with magnitudes from 1.0 to 6.3. Time distribution of b-value shows that there is a tendency to decrease after the year of 2002 and b-value decreased from 1.58 ± 0.03 to 1.25 ± 0.05 at the beginning of 2019. Annual probabilities for magnitude ranges of 3.0–4.0 have the values between 3 and 30. Return periods for magnitude levels of 5.0–5.5 have the values from 5 to 20 years, and a value of 80 years for magnitude level of 6.0. The GENAS results show the significant temporal variations in the number of earthquakes smaller and larger than specific magnitude intervals by supplying the beginning periods of increases and decreases in the earthquake activity rate. Remarkable reductions in region-time distribution of b-value at the beginning of 2019 were detected in the regions covering Niğde fault and its vicinity along the south, west, northwest and southwest directions, among the Mut Fault Zone, Karsantı-Karaisalı Fault Zone and Karataş-Osmaniye Fault Zone, in and around Sürgü fault and along its northwest direction, between Sürgü fault and East Anatolian Fault Zone. Significant seismic quiescence areas in Z-value distribution include the northwest ends of the Tuzgölü Fault Zone and study area including Akpınar fault, the northeast of Salanda fault, between Salanda fault and the Central Anatolian Fault Zone, the northeast parts of the Central Anatolian Fault Zone, the west of Malatya fault, between Sürgü fault and the East Anatolian Fault Zone, the southeast end of the Tuzgölü Fault Zone, Karsantı-Karaisalı Fault Zone and its vicinity, the southwest of Tuzgölü. Thus, these anomaly areas observed in the Central Anatolian region and its vicinity at the beginning of 2019 may be one of the most likely zones for the next strong/large earthquake occurrences.

    İncele
  • MakaleAçık Erişim2020
    Political will, political skill, network resources and personal reputation: A serial two-mediator model

    Demirbağ, Orkun; Demir, Hale Cide; Yozgat, Uğur

    Purpose: Although social capital and positive reputation in organizations are essential for career success, there is a limited perspective in the literature on the political characteristics (motivation and ability) that enable one to acquire and develop the two elements. This study seeks to investigate the sequential role of political skill and network resources as serial mediators of the political will-personal reputation relationship. Methodology: In total, what provided data for the study were 457 sales executives from 13 different sectors in the cities of İstanbul, Kocaeli, and Bursa, which is an economically leading region of western Turkey. Executives rated their political will, political skill network resources, and personal reputation. Based on the complementary theories of political influence, social network, and signaling, we analyzed the relationships between constructs with structural equation modeling. Findings: Political skill mediated the relationship between political will and network resources, network resources mediated the relationship between political skill and personal reputation, while political skill and network resources sequentially mediated the relationship between political will and personal reputation. Implications: The data were collected from a single source. Practical Implications: Political will, political skill training, and social networks may help individuals manage their personal reputation at work, thus benefiting their careers. Originality/Value: This is one of the first studies to sequentially investigate how individuals' characteristics (motivation and ability) develop their social network and personal reputation at work. Moreover, theories of political influence, social capital, and signaling were jointly used for the first time ever.

    İncele
  • BildiriYalnız künye2020
    Duplicated Audio Segment Detection with Local Binary Pattern

    Kucukugurlu, Busranur; Ustubioglu, Beste; Ulutas, Guzin; Herencsar, N.

    Due to the advantages of convenience, and difficulty of detection, copy-move forgery is one of the most common audio forgery forms. It is significant to decide whether there is a duplicated segment in the audio. In order to detect copy-move forgery, a new method is proposed in this paper. In the proposed algorithm, first the audio is segmented into syllables using a pitch tracking method. Second, each syllable analyzed with a 1-D local binary pattern operator. This operator calculates the histogram of each syllable. Mean square error is used to compute the similarities of histograms. The syllables which have similar histograms are detected as forged audio segments. Compared to another 1-D local binary pattern method, the proposed method has better detection results for copy-move forgery. Our experiments show that the proposed algorithm is feasible and effective, and robust against many common postprocessing operations such as noise addition, filtering, and compression.

    İncele
  • Derleme MakaleAçık Erişim2020
    Coronavirus disease 2019 infection and nursing in patients undergoing hemodialysis treatment

    Demirag, Hatice; Hintistan, Sevilay

    Coronavirus disease 2019 (COVID-19) is an infectious disease caused by severe acute respiratory syndrome coronavirus 2. Patients undergoing chronic hemodialysis treatment are at a high risk of serious complications if infections occur because of suppressed immune system, cardiovascular disease, and important comorbidities, such as diabetes mellitus. To control and prevent the spread of the outbreak to patients and other healthcare professionals, it is necessary to be informed about COVID-19, to diagnose cases early, and to be treated. The purpose of this review is to discuss the communication, transport, predialysis screening and triage, and COVID-19 nursing management in patients undergoing hemodialysis treatment.

    • SDG 3 · Sağlık ve Kaliteli Yaşam
    İncele
  • MakaleAçık Erişim2020
    Numerical solution to elliptic inverse problem with Neumann-type integral condition and overdetermination; [Интегралдық шарты бар және қайта анықталған Нейман типтi эллипстiк керi есептiң сандық есептеуi]; [Численное решение эллиптической обратной задачи с интегральным условием и переопределением типа Неймана]

    Ashyralyyev, C.; Cay, A.

    In modeling various real processes, an important role is played by methods of solution source identification problem for partial differential equation. The current paper is devoted to approximate of elliptic over determined problem with integral condition for derivatives. In the beginning, inverse problem is reduced to some auxiliary nonlocal boundary value problem with integral boundary condition for derivatives. The parameter of equation is defined after solving that auxiliary nonlocal problem. The second order of accuracy difference scheme for approximately solving abstract elliptic overdetermined problem is proposed. By using operator approach existence of solution difference problem is proved. For solution of constructed difference scheme stability and coercive stability estimates are established. Later, obtained abstract results are applied to get stability estimates for solution Neumann-type overdetermined elliptic multidimensional difference problems with integral conditions. Finally, by using MATLAB program, we present numerical results for two dimensional and three dimensional test examples with short explanation on realization on computer.

    İncele
  • MakaleYalnız künye2020
    Development of a healthy corn-based snack with sage (Salvia officinalis L.) seed

    Yuksel, Ferhat; Ilyasoglu, Huri; Baltaci, Cemalettin

    A healthy corn-based snack was developed from the corn flour and sage (Salvia officinialis L.) seed flour. The effects of the process variables (sage seed flour: 0–15%, frying temperature: 170–190 °C, and frying time: 40–60 s) on the nutritional properties, fatty acid composition and oxidative stability of the snack chips were evaluated via Response Surface Methodology (RSM). The response models explaining 72–96% variability in the responses were obtained. Only sage seed flour presented significant effects on the nutritional properties (p < 0.05). The interaction term of sage seed flour and frying temperature showed significant effects on the fatty acid composition (p < 0.05). The sage seed flour could decrease total starch and in vitro glycemic index and increase total dietary fiber. The snack chips contained unsaturated fatty acids more than 60%, and their oils had acceptable peroxide value. The fortification of corn-based snack with sage seed enhanced the nutritional value.

    • SDG 2 · Açlığa Son
    • SDG 3 · Sağlık ve Kaliteli Yaşam
    İncele
  • MakaleYalnız künye2020
    Visual Perception for Multiple Human-Robot Interaction from Motion Behavior

    Benli, Emrah; Motai, Yuichi; Rogers, John

    Visual perception is an important component for human-robot interaction processes in robotic systems. Interaction between humans and robots depends on the reliability of the robotic vision systems. The variation of camera sensors and the capability of these sensors to detect many types of sensory inputs improve the visual perception. The analysis of activities, motions, skills, and behaviors of humans and robots have been addressed by utilizing the heat signatures of the human body. The human motion behavior is analyzed by body movement kinematics, and the trajectory of the target is used to identify the objects and the human target in the omnidirectional (O-D) thermal images. The process of human target identification and gesture recognition by traditional sensors have problem for multitarget scenarios since these sensors may not keep all targets in their narrow field of view (FOV) at the same time. O-D thermal view increases the robots' line-of-sights and ability to obtain better perception in the absence of light. The human target is informed of its position, surrounding objects and any other human targets in its proximity so that humans with limited vision or vision disability can be assisted to improve their ability in their environment. The proposed method helps to identify the human targets in a wide FOV and light independent conditions to assist the human target and improve the human-robot and robot-robot interactions. The experimental results show that the identification of the human targets is achieved with a high accuracy.

    İncele
  • MakaleYalnız künye2020
    Geochemical composition of magnetite from different iron skarn mineralizations in NE Turkey: implication for source of ore-forming fluids

    Sipahi, Ferkan; Gücer, Mehmet Ali; Saydam Eker, Çiğdem

    Iron oxide mineralizations in the eastern part of the Pontides (NE Turkey) are hosted in the skarn environments which are the Pontide paleomagmatic arc. These mineralizations always occur in the contacts between granitoid and limestone. Magnetites are hosted in carbonate rocks and generally formed during garnet-magnetite-epidote-quartz phase. Magnetites have high Co (15.8–43.4 ppm for the Kopuz, 11–12.5 ppm for the Eğrikar, and 3.8–1266.7 ppm for the Karadağ) concentrations suggesting that the sulfide decreased from the early to the late phases in the iron skarn mineralization forming systems. The Co/Ni ratios in the magnetites (0.12 to 35.38 for Karadağ, 2.19 to 13.53 for the Kopuz, and 2.39 to 5.21 for the Eğrikar) show the hydrothermal effect on the magmatic source in iron skarns in the study area. Thus, variable Co/Ni ratios reflect interactions between the magma with the host rock during successive alteration stages. Magnetites in this study have Sc-Nb-Mg-Ti depletions and Ta enrichment. In this study, high Co, Ti, and V contents in magnetites suggest the high temperature (300–500 °C) and low ƒO2. The V contents of the magnetite in the Karadağ increase with the decreasing oxygen fugacity of fluid(s) forming magnetites, whereas the V contents of the magnetites in the Kopuz and Eğrikar decrease with increasing oxygen fugacity of fluid(s) forming magnetites. Element patterns and Ni/Cr ratio (< 1) of the magnetite are geochemically similar to those of magnetite in Fe-skarn deposits and partly magmatic accessory magnetite of I-type granites. As a result, the Co, Ni, V, and Ti elements of the magnetite have played an important role in the discriminating and interpreting of skarn mineralizations in the eastern Pontides and support a calcic skarn origin with studies of the mineralization geology.

    İncele
  • MakaleYalnız künye2020
    A simplified neutrosophic multiplicative set-based TODIM using water-filling algorithm for the determination of weights

    Köseoğlu, Ali; Şahin, Rıdvan; Merdan, Mehmet

    Due to the technological developments around the world, the amount of information that researchers work on increases continuously. This information density contains incomplete and uncertain data that cannot be fully expressed with crisp numbers. Fuzzy sets, intuitionistic fuzzy sets, and neutrosophic sets are useful tools to manage such information, but these concepts use a symmetrical and uniform scale to express data, whereas real-life problems contain nonsymmetrical and non-uniform information. Intuitionistic multiplicative sets (IMSs) are effective tools for dealing with these real-life problems. However, IMSs cannot handle real-life problems completely because indeterminate information depends on membership and non-membership information of IMSs, which is a restriction for decision makers and also for decision problems. To overcome this limitation, this paper generalizes the IMSs by using simplified neutrosophic set and introduces a novel approach that is called simplified neutrosophic multiplicative sets (SNMSs). Firstly, we define SNMS, show their set-based operations, and then give a description of simplified neutrosophic multiplicative numbers (SNMNs). Based on SNMNs, we develop two simplified neutrosophic multiplicative aggregation operators on SNMNs that are called simplified neutrosophic multiplicative weighted arithmetic average operator and simplified neutrosophic multiplicative weighted geometric average operator. Furthermore, we define some simplified neutrosophic multiplicative distance measures. Finally, using a model based on water-filling algorithm for determining criteria weights, we give a numerical example to demonstrate the effectiveness of the introduced concept with the proposed simplified neutrosophic multiplicative simplified neutrosophic multiplicative-TODIM method.

    İncele
  • MakaleYalnız künye2020
    Tribocorrosion behaviour of porous anatase and rutile phases formed on surface of anodised Ti45Nb alloy

    Tasdemir, Muharrem; Alsaran, Akgun

    Titanium alloys are used across a wide range of sectors—from aerospace to health—because of their low density, high strength, and corrosion resistance properties. In recent years, the use of alloying elements such as niobium (Nb), tantalum (Ta), and zirconium (Zr) has still not eliminated existing wear problems, in spite of being preferred to conventional titanium alloys that are non-toxic and have better corrosion and mechanical properties. In order to overcome this problem of titanium alloys, various surface treatments are applied. This study was mainly aimed at investigating tribocorrosion properties of anatase, rutile, and anatase-rutile phases formed on the surface of Ti45Nb by anodising at different potential values. The structural and mechanical properties of these structures were examined by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), nanoindentation, and a 3D profilometer. Tribocorrosion tests were carried out at open-circuit potential (OCP) and two different anodic in NaCl solutions. It was found that the wear volume was affected by mechanical action rather than chemical effects for all samples during tribocorrosion. It was concluded that while a surface structure including anatase is more sensitive to chemical effects, the rutile structures were shown to be more resistant to both mechanical and chemical attacks during tribocorrosion tests.

    İncele
  • MakaleYalnız künye2020
    Discovery and evaluation of inhibitory activity and mechanism of arylcoumarin derivatives on Theileria annulata enolase by in vitro and molecular docking studies

    Yakarsonmez, Sinem; Danis, Ozkan; Mutlu, Ozal; Topuzogullari, Murat; Sariyer, Emrah; Yuce-Dursun, Basak; Turgut-Balik, Dilek

    Abstract: In this study, the inhibition potential of 3- and 4-arylcoumarin derivatives on Theileria annulata enolase (TaENO) was assessed for the first time in the literature. Firstly, protein stabilization analyses of TaENO were performed and it was found that the enzyme remains stable with the addition of 6 M ethylene glycol at + 4 °C. Inhibitor screening analyses were carried out using 25 coumarin derivatives on highly purified TaENO (> 95%), and four coumarin derivatives [4-(3,4-dimethoxyphenyl)-6,7-dihydroxy-2H-chromen-2-one (C8); 4-(3,4-dihydroxyphenyl)-7,8 dihydroxy-2H-chromen-2-one (C9); 4-(3,4-dihydroxyphenyl)-6,7-dihydroxy-2H-chromen-2 one (C21); and 3-(3,4-dihydroxyphenyl)-7,8-dihydroxy-2H-chromen-2-one (C23)] showed the highest inhibitory effects with the IC50 values of 10.450, 13.170, 8.871 and 10.863 µM, respectively. The kinetic results indicated that these compounds inhibited the enzyme by uncompetitive inhibition. In addition, the successful binding of the most potent inhibitor (C21) into TaENO was confirmed by using MALDI-TOF mass spectrophotometry. Molecular docking analyses have predicted that C8 and C21 coumarin derivatives which showed high inhibitory effects on TaENO were interacted with high affinity to the potential regions out of the active site. Taken together, these coumarin derivatives (C8, C9, C21 and C23) are first known potent, nonsubstrate, uncompetitive inhibitors of TaENO and these results will facilitate further in vitro and in vivo analysis toward structure-based drug design studies. Graphic abstract: [Figure not available: see fulltext.]

    • SDG 3 · Sağlık ve Kaliteli Yaşam
    İncele
  • Derleme MakaleYalnız künye2020
    Buckwheat: A useful food and its effects on human health

    Yilmaz, Hacı Ömer; Ayhan, Nurcan Yabanci; Meriç, Çağdaş Salih

    Buckwheat is a plant used for many purposes, such as consumed as a food and used in the treatment of diseases. It is a good source of many vitamins and minerals and has balanced nutritional value. Because of its nutrient content and many positive effects on human health, buckwheat has become a functional food, recently. Main effects of buckwheat on human health are its hypotensive, hypoglycemic, hypocholesterolemic, neuroprotective and antioxidant effects. Thus, it is considered an alternative food component in dietary treatment for chronic and metabolic diseases, such as diabetes, hypertension and celiac disease. Also, its rich nutrient content supports daily diet and provides a better eating profile. As a result, buckwheat is accepted as a functional food, suggested to improve human health and is used in the treatment of diseases. The aim of this review is to explain some positive effects of buckwheat on human health.

    • SDG 2 · Açlığa Son
    • SDG 3 · Sağlık ve Kaliteli Yaşam
    İncele
  • MakaleYalnız künye2020
    Synthesis of Microwave-Assisted Fluorescence Carbon Quantum Dots Using Roasted–Chickpeas and its Applications for Sensitive and Selective Detection of Fe3+ Ions

    Başoğlu, Aysel; Ocak, Ümmühan; Gümrükçüoğlu, Abidin

    A simple method for the green synthesis of fluorescent carbon quantum dots (CQDs) has been developed by using roasted chickpea as carbon source in one-step without using any chemical. Interestingly, not only the carbon source of CQDs and the whole synthesis procedure are environmentally friendly, but also the synthesized CQDs have shown many advantageous properties such as high fluorescence intensity, excellent photostability, and good water solubility. CQDs which were firstly synthesized from roasted–chickpeas by a microwave-assisted pyrolysis have been characterized using UV-vis absorption spectroscopy, fluorescence spectroscopy, fourier transform infrared spectroscopy (FTIR) spectroscopy, X-ray diffraction (XRD) technique and transmission electron microscopy (TEM). In addition, the details of the structure have been revealed by the electron diffraction (SAED; selected-area electron diffraction) method based on the TEM images. The synthesized CQDs emits blue fluorescence under UV light (at 365 nm). A microwave oven (350 watts) was used to prepare CQDs in 120 s. The effect of various metal ions on the fluorescence intensity of CQDs was investigated in order to determine its utality in the detection of metal ions. It was determined that 1.38 mg/L of Fe3+ ions quenched the fluorescence intensity of the CQDs by 65%. The linear range is observed between 11.25 and 37.50 μM with limit of detection (LOD) and limit of quantification (LOQ) of 2.74 μM and 8.22 μM, respectively. CQDs which are highly selective and sensitive for Fe3+ ions was used to determine Fe3+ ions in certified reference material (CRM-SA-C). Fe3+ ions concentration was determined with precision values of more than 95% as intra-day and inter-day relative standard deviation (RSD%) is 5 at room temperature.

    İncele
  • MakaleYalnız künye2020
    Temporal, geochemical and geodynamic evolution of the Late Cretaceous subduction zone volcanism in the eastern Sakarya Zone, NE Turkey: Implications for mantle-crust interaction in an arc setting

    Aydin, Faruk; Oğuz Saka, Simge; Şen, Cüneyt; Dokuz, Abdurrahman; Aiglsperger, Thomas; Uysal, İbrahim; Kandemir, Raif; Karslı, Orhan; Sarı, Bilal; Başer, Rasim

    The Late Cretaceous Artvin volcanic rocks (LCAVs) from the eastern Sakarya zone (ESZ) of NE Turkey are composed of mafic/basaltic (S1-Çatak and S2-Çağlayan) and felsic/acidic (S1-Kızılkaya and S2-Tirebolu) rock types that occurred in two successive stages: (i) first stage (S1: Turonian–Early Santonian) and (ii) second stage (S2: Late Santonian–Campanian). Clinopyroxene thermobarometric results point that the S2-Çağlayan basaltic rocks have crystallised at higher temperatures and under deeper crustal conditions than those of the S1-Çatak basaltic rocks. The LCAVs show a wide compositional spectrum, ranging from tholeiite to calc-alkaline/shoshonite and are typically represented by a geochemical composition resembling subduction-related arc rocks although the 87Sr/86Sr(i) (0.7044–0.7071) and ɛNd(i) values (−0.63 to + 3.47) as well as 206Pb/204Pb(i) (18.07–18.56), 207Pb/204Pb(i) (15.57–15.62) and 208Pb/204Pb(i) (37.12–38.55) ratios show very limited variation. The parent magmas of the S1-Çatak and S2-Çağlayan mafic volcanic rocks were derived from underplated basaltic melts that originated by partial melting of metasomatised spinel lherzolite and spinel-garnet lherzolite, respectively. It is proposed that the compositions of the S1-Kızılkaya (mainly dacitic) and S2-Tirebolu (rhyolitic to trachytic) felsic rocks were particularly controlled by metasomatised mantle–crust interaction and MASH zone + shallow crustal fractionation processes. Our data, together with data from previous studies, suggest that the S1- and S2-mafic and felsic rocks of the LCAVs (~95–75 Ma) are the products of two-stage volcanic event that took place during the northward subduction of the northern Neotethys Ocean (NNO).

    İncele
  • MakaleYalnız künye2020
    Hollow porous gold nanoparticle/reduced graphene oxide composite films for electrochemical supercapacitor applications

    Bahar, Necmiye; Ekinci, Duygu

    Here, we report the synthesis of hollow porous gold nanoparticles-decorated reduced graphene oxide (HPAuNPs/RGO) nanocomposites and their electrochemical performances as active electrode material for supercapacitors. Accordingly, the HPAuNPs were first prepared using a simple solution phase template method according to the modified literature procedure, and the size control of hollow porous gold particles was achieved by varying the concentration of hydroquinone used as the reducing agent. Then, the surface of the RGO nanosheets was decorated with HPAuNPs through the self-assembly approach. The structural and morphological features of synthesized nanoparticles and nanocomposites were evaluated by spectroscopic and morphologic methods. Also, the electrochemical supercapacitive performances of the HPAuNPs/RGO/GC nanocomposite electrodes as both cathode and anode materials were analyzed in Na2SO4 solution using electrochemical methods. As a control sample, the RGO/GC electrode was also examined under identical experimental conditions. The results indicate that the composite materials display higher specific capacitances (107–325 F/g) compared with bare RGO (55 and 37 F/g) at a potential scan rate of 20 mV/s. Furthermore, it is obtained that the specific capacitances of the composite electrodes based on hollow porous gold nanoparticles are larger than those of previously reported supercapacitors with spherical gold nanoparticles/graphene as electrode materials. The improved electrochemical properties of the HPAuNPs/RGO/GC nanocomposite electrodes can be ascribed to the hollow and porous structure of the gold particles on RGO sheets.

    İncele
  • MakaleYalnız künye2020
    Optimization of ultrafast laser parameters for 3D micromachining of fused silica

    Dogan, Yusuf; Madsen, Christi K.

    We present an optimization study on laser parameters for 3D micromachining of fused silica to achieve critical goals for practical applications including high surface quality, high volume production, and complex surfaces by ultrafast laser direct writing assisted chemical etching. We conducted experiments on laser pulse width of 300 fs and 1 ps, pulse energy ranging from 0.1 µJ to 1.6 µJ, three different polarizations (circular, parallel and perpendicular) and number of overlapped pulses from 3 to 10,000 at 1030 nm with up to 2 MHz repetition rate to investigate their effect on nanogratings and one dimensional (1D) channel and two dimensional (2D) planar surface selective etching on 1 mm thick fused silica. In one configuration, we achieved 21.8 nm RMS surface roughness with 80 µm Gaussian filtering and in another configuration, we estimated the maximum writing speed to be 1.25 m/s for given 2 MHz repetition rate with less than 400 nm filtered root mean square (RMS) surface roughness at a 1 mm2 area which covers the thickness of the glass.

    İncele
  • MakaleYalnız künye2020
    A review study on using diethyl ether in diesel engines: Effects on fuel properties, injection, and combustion characteristics

    Sezer, İsmet

    This study was compiled from the results of various researches performed on using diethyl ether as a fuel or fuel additive in diesel engines. Three different techniques are used, the reduction of the harmful exhaust emissions of diesel engines. The first technique for the reduction of harmful emissions has improved the combustion by modification of engine design and fuel injection system, but this process is expensive and time-consuming. The second technique is the use of various exhaust gas devices like catalytic converter and diesel particulate filter. However, the use of these devices affects negatively diesel engine performance. The final technique to reduce emissions and also improve diesel engine performance is the use of various alternative fuels or fuel additives. The major pollutants of diesel engines are nitrogen oxides and particulate matter. It is very difficult to reduce nitrogen oxides and particulate matter emissions simultaneously in practice. Most researches declare that the best way to reduce these emissions is the use of various alternative fuels i.e. natural gas, biogas, biodiesel, or the use of fuel additives with these alternative fuels or conventional diesel fuel. Therefore, it is very important that the results of various studies on alternative fuels or fuel additives are evaluated together for practice applications. Especially, this study focuses on the use of diethyl ether in diesel engines as fuel or fuel additive in various diesel engine fuels. This review study investigates the effects of diethyl ether on the fuel properties, injection, and combustion characteristics.

    • SDG 7 · Erişilebilir ve Temiz Enerji
    İncele
  • Kitap BölümüYalnız künye2020
    Basic instruments in European Union urbanization policy

    Cengiz, Emre

    İncele
  • MakaleYalnız künye2020
    The effect of expressed breast milk, swaddling and facilitated tucking methods in reducing the pain caused by orogastric tube insertion in preterm infants: A randomized controlled trial

    Apaydin Cirik, Vildan; Efe, Emine

    Background: Orogastric tube feeding is used to support the nutrition of preterm infants. Although nonpharmacological methods are effective in reducing the pain caused by orogastric tube insertion, only limited studies have been found addressing this pain. No study has used combined nonpharmacological methods to reduce this orogastric tube insertion pain. Objective: This randomized controlled study aims to compare the effects of expressed breast milk, swaddling, facilitated tucking, expressed breast milk+swaddling, expressed breast milk+facilitated tucking and routine care methods on preterm infant pain and the physiological parameters (i.e., heart rate, oxygen saturation) before, during and after orogastric tube insertion procedures. Design: Randomised controlled trial. Setting: Three level III neonatal intensive care units in Turkey. Method: Preterm infants born at 32–34 weeks gestation were randomly assigned to six groups: routine care (n = 33), swaddling (n = 30), facilitated tucking (n = 32), expressed breast milk (n = 31), swaddling+expressed breast milk group (n = 30), and facilitated tucking+expressed breast milk group (n = 31). Orogastric tube insertion included four phases: baseline (the last one minute of 30 min without stimuli), the insertion, recovery (one minute after insertion), and recovery (two minutes after insertion). The four phases were videotaped. Premature infant pain profile score, heart rate and oxygen saturation were assessed by two independent evaluators who were blinded to the purpose of the study. Data were assessed by analysis of variance for the multiple repeated measurements, bonferroni and generalised estimating equation logistic regression. Results: There was a significant main effect of the intervention groups for all the pain and physiological parameters (heart rate: F = 3.99, p = 0.001; oxygen saturation: F = 5.22, p<0.001; pain profile 1 score: F = 9.55, p<0.001; pain profile 2 score: F = 9.74, p<0.001). The use of the nonpharmacological methods combined or alone was more effective in reducing infants’ pain profile score and physiological variables than routine care. Infants receiving swaddling+expressed breast milk had significantly lower pain profile scores during the insertion (phase2) (5.2 ± 1.7) than those receiving routine care (9.5 ± 3.6), swaddling (8.8 ± 2.9), facilitated tucking (7.2 ± 3.2), expressed breast milk (7.9 ± 2.6), facilitated tucking+expressed breast milk (6.6 ± 2.3) (p<0.001). The breast milk group had 6.195 times more pain than the swaddling+expressed breast milk, while the facilitated tucking group had 6.301, the facilitated tucking+expressed breast milk group had 3.107, the control group had 13.015, and the swaddling group had 7.892 times more pain. Conclusion: The swaddling+expressed breast milk method is clinically better pain relief nonpharmalogical option and is the recommended method to nurses for the orogastric tube insertion procedures, preterm infants.

    • SDG 3 · Sağlık ve Kaliteli Yaşam
    İncele
  • MakaleYalnız künye2020
    Simulation optimization of the berth allocation in a container terminal with flexible vessel priority management

    Yıldırım, Mehmet Sinan; Aydın, Metin Mutlu; Gökkuş, Ümit

    Solving the berth allocation problem (BAP) in ports is not trivial where the berth resources are limited and various sizes of vessels arrive with dramatically dissimilar loads. Especially in real scenarios, arriving vessels are accepted for a berth with the first come first served (FCFS) priority rule. This study proposes a decision support system coupled with a simulation optimization module based on the swarm-based Artificial Bee Colony optimization algorithm for solving the BAP. The proposed methodology was implemented for the Izmir port in Turkey. To investigate the influences of the vessel priorities on the BAP, four different experimental scenarios based on the single (SQM) and multiple queue models (MQM) were coupled with FCFS and proposed hybrid queue priority (HQP) rule. The results indicated that SQM scenarios were superior to MQM scenarios in a manner of minimizing the average vessel waiting times and the implementation of a dynamic berth allocation strategy for the MQM significantly decreases the vessel waiting times. Results of the SQM also imply that utilization of the HQP approach further minimizes the average vessel waiting times and increases the berth utilization and port throughput without yielding excessive waiting times for the larger vessels compared with the FCFS priority rule.

    İncele