Sürdürülebilir Kalkınma Amaçları

Yazarlar

  • MakaleAçık Erişim2020
    The Relationship Between Entrepreneurship Levels of the Students of (Sports Sciences) and their Athlete Identities

    Bas, Mustafa; Aydin, Elif

    The study was carried out on a total of 240 university students, 111 (46.3%) female and 129 (53.8%) male. The Personal Information Form prepared by the researcher and the University Students Entrepreneurship Scale. In the research, the survey model, one of the quantitative research designs, was used. While the entrepreneurship and athlete identity levels of the students differ significantly in the social identity and negative affectivity sub-dimensions according to gender, no significant difference was found in other sub-dimensions. By this relationship between entrepreneurship and athlete identity levels of the students, it was found that there is a positive and significant relationship between entrepreneurship, and social identity and negative affectivity. Further, a positive relationship between entrepreneurship, and social identity and negative affectivity was evidenced. It was determined that the limited sports sub-dimension was not a significant predictor of the entrepreneurship score. A statistically significant difference was found between university students' entrepreneurship and athlete identity levels and their gender, department, class and licensed athlete scores.

  • MakaleAçık Erişim2020
    Lymphedema Information and Prevention Practices of Women After Breast Cancer Surgery

    Aydin, Aydanur; Gürsoy, Ayla

    AIM: This study was carried out to determine women's knowledge about lymphedema precautions and their practice status. The sample of this descriptive and correlationally designed study included 107 women who underwent surgery. METHOD: This descriptive study's data were collected using a questionnaire form developed by the researcher. The data were structured on a 3-point Likert-typescale.The one-way analysis of variance, correlations, and the Kolmogorov-Smirnov test were used in the statistical analysis. RESULTS: Three-quarters of the women knew that they should do arm exercises, keep the arm above the heart level while resting, and that blood pressure should not be measured, and jewelry not be worn. However, it was found that the percentage of women who did not know that the arm circumference should be measured at regular intervals or how to evaluate the arm circumference measurements and what to do in case of an injury was the same. It was determined that the precautions that the majority of women took in measuring lymphedema consisted of not measuring blood pressure, not wearing tight jewelry, and wearing an appropriate bra. CONCLUSION: It is thought that patients should be informed about the development of lymphedema after breast cancer surgery because their compliance with taking the precautions will be important in reducing the incidence, degree, and effects of lymphedema.

    • SDG 3 · Sağlık ve Kaliteli Yaşam
    AtıfWoS7OpenAlex8
    Web of SciencePubMedTR Dizinİncele
  • MakaleAçık Erişim2020Scopus SJRQ1
    SOS5 gene-abscisic acid crosstalk and their interaction with antioxidant system in Arabidopsis thaliana under salt stress

    Acet, Tuba; Kadıoğlu, Asım

    SOS5 locus, encodes cell wall adhesion protein under salt stress conditions in plants, and it is required for normal cell expansion as well as for sustaining cell wall integrity and structure. However, it is still unknown how this gene locus-ABA cross-talk and interacts with the antioxidant mechanism under salt stress conditions. For this purpose, the study focused on mutant sos5-1 plant treated with ABA under NaCl stress and observed its growth and development as well as stomatal aperture, lipid peroxidation, proline, hydrogen peroxide (H2O2) and ABA contents, and some antioxidant enzyme activities. In addition, the expression levels of ABA related genes have been analysed by RT-PCR after stress application. According to findings, sos5-1 mutant plants treated with ABA under salt stress resulted in eliminated cellular damage compared to those which are solely exposed to salt stress; other observations include closing of stomata, decreased H2O2 content, increased amount of proline, and similarity with the wild type due to induced antioxidant enzyme activities. Besides, both ABA biosynthetic and inducible gene expressions of the mutant plant under salt stress were lower compared to the control, and catabolism gene expression was higher. As a result, SOS5 gene in synergy with ABA, scavenge the ROS by stimulating antioxidant system, leads to an increase in stress related gene expressions and thus contributes to salinity tolerance. This study is significant in the way that it shows how SOS5 gene locus, under salt stress conditions, interacts with antioxidant system in sustaining cell wall integrity.

    • SDG 2 · Açlığa Son
    AtıfScopus21WoS20OpenAlex21
    ScopusWeb of SciencePubMedİncele
  • MakaleAçık Erişim2020Scopus SJRQ2
    A study on noise levels of machinery used in lumber industry enterprises

    Fidan, Muhammed Said; Yasar, Sekip Sadiye; Komut, Osman; Yasar, Mehmet

    The aim of this study is to help to create a healthier environment by measuring the noise levels in the furniture and lumber sectors of forest products industry. In this study, noise measurement for approximately 3 min has been conducted in 4 measurement spots in the side of the machinery, in the factory entrance and in full and empty state for each machinery; from 3 different chosen spots in enterprises producing lumber. Measurements have been recorded as 720, from each machine as 36 measurements, with the condition to be recorded every 5 sec for 3 min. For this purpose, noise measurements have been carried out in 17 workplaces producing lumber and results have been compared statistically. As a result of the obtained findings, it is understood that the noise levels of thickness machinery don't exceed the value for the upper limit stated in the regulations. However, vertical wood band sawmill and band saw machines have been observed to go over this limit. Besides, some factors of planning and multi slitting machine don't exceed this limit, some of them exceed. As a result, it has been conducted that when noise levels of machinery used in the lumber industry enterprises exceed the upper limit stated in the regulations, they can pose a serious threat to human health.

    • SDG 8 · İnsana Yakışır İş ve Ekonomik Büyüme
    AtıfScopus6WoS6OpenAlex6
    ScopusWeb of Scienceİncele
  • MakaleAçık Erişim2020Scopus SJRQ3
    Low-cost brain-computer interface using the emotiv epoc headset based on rotating vanes

    Melek, Mesut; Manshouri, Negin; Kayikcioglu, Temel

    In the brain-computer interface system (BCI), electroencephalography (EEG) signals are converted into digital signals and analyzed, allowing direct communication between humans and the electronic devices around them. The convenience of the user and the speed of communication with the surrounding devices are the most important challenges of BCI systems. The Emotiv Epoc headset minimizes the discomfort of the user thanks to its wet electrodes and easy handling. In the continuation of our previous works, in this paper, we developed our BCI system based on the gaze at the rotating vanes using the inexpensive Emotiv Epoc headset. In addition to user comfort, our design has an acceptable mean accuracy rate (ACC) and mean information transfer rate (ITR) compared to similar systems.

    AtıfScopus11WoS10OpenAlex18
    ScopusWeb of Scienceİncele
  • MakaleAçık Erişim2020Scopus SJRQ1
    One-year performance evaluation of two newly developed back-contact solar modules in two different climates

    Ozden, Talat; Carr, Anna J.; Geerligs, Bart (L.J.); Turan, Rasit; Akinoglu, Bulent G.

    To a certain extent, the photovoltaics industry is well developed, and the performance and expected yield of standard photovoltaic modules are well documented and researched. However, newer more efficient photovoltaic cell and module technologies are being developed all over the world. Outdoor testing of new photovoltaic technologies is very important to understand and validate their reliability and performance under different environmental conditions. For the first time, one year of monitored performance data is presented and analyzed for two high efficiencies interdigitated back contact prototype mini-modules at different locations, having different climates. The test results of a commercial heterojunction with intrinsic thin-layer” module are also presented for comparison. The results showed that the two mini-modules remained stable for the duration of the test period, and showed no signs of degradation. They did perform significantly differently due to the different climatic conditions. The results also show that the combination of ambient temperature difference together with relative humidity impacts the performance of the modules. Calculated outdoor yearly efficiencies are 19.05% and 18.36% for two integrated back contact mini-modules tested in Petten-Netherland and Ankara-Turkey, respectively. The temperature coefficients of the modules are also calculated and compared with two commercial photovoltaic modules.

    • SDG 7 · Erişilebilir ve Temiz Enerji
    • SDG 13 · İklim Eylemi
    AtıfScopus8WoS6OpenAlex8
    ScopusWeb of Scienceİncele
  • MakaleAçık Erişim2020Scopus SJRQ2
    3D digital representation of cadastral data in Turkey-Apartments case

    Döner, Fatih; Şirin, Samet

    With the widespread use of three-dimensional (3D) geographic information technologies, studies for 3D digital representation of property units in cadasters have increased in recent years. In Turkey, a project named 3D City Models and Cadasters was initiated by the General Directorate of Land Registries and Cadasters in 2018. With this project, which is planned to last four years, it aims to create 3D models of individual units (apartments) in buildings and provide visual representations of these individual units with legal information. Transition from the current 2D representation towards a 3D digital cadaster requires not only replacing analog drawings with 3D models but also examining the workflow for forming the property units. In this study, the process of registration of property rights for individual units is examined and possibilities and challenges for successful completion of the 3D cadaster project are evaluated from a legal, an organizational, and a technical point of view. Government plays a lead role by adopting the digital transformation as a state policy. However, new regulations and organizational settings may have to be introduced. Modeling and visualization alternatives for 3D data should be studied further.

    • SDG 11 · Sürdürülebilir Şehirler ve Topluluklar
    • SDG 16 · Barış, Adalet ve Güçlü Kurumlar
    AtıfScopus14WoS11OpenAlex15
    ScopusWeb of Scienceİncele
  • MakaleAçık Erişim2020Scopus SJRQ1
    How cultural tightness relates to creativity in work teams: Exploring the moderating and mediating mechanisms

    Gedik, Yeliz; Ozbek, Mehmet Ferhat

    In the present study, we examined the team-level association between cultural tightness, justice and creativity under varying levels of collectivism. Utilizing data from a field sample of 532 employees distributed across 147 work teams in 13 organizations, we demonstrated that cultural tightness was negatively related to team creativity for teams with lower levels of collectivism, but we did not observe such clear effects in teams with higher levels of collectivism. Finally, our results indicated that team justice climate (i.e., the average justice perception within the team) mediated the relationship between cultural tightness and team creativity in teams with lower levels of collectivism. Our findings accentuate the importance of understanding how norm-based (i.e., cultural tightness) and value-based (i.e., team collectivism) cultural dimensions jointly impact upon team creativity and suggest that managers should consider the optimal configuration of cultural dimensions if creativity is vital to their work team's functioning.

    AtıfScopus18WoS17OpenAlex21
    ScopusWeb of Scienceİncele
  • MakaleAçık Erişim2020Scopus SJRQ4
    Bacteriocin producing bacteria isolated from Turkish traditional sausage samples

    Erkaya, Elif; Genc, Berna; Akbulut, Sumeyya; Adiguzel, Gulsah; Omeroglu, Mehmet Akif; Ozkan, Hakan; Adiguzel, Ahmet

    In this study, traditional sausage samples from different provinces of Turkey (Gaziantep, Antalya, erzurum and Kahramanmaras) were obtained and one hundred three isolates were collected. Using the (GTG)5-PCR genomic fingerprint analysis method, seven of them were observed to be different and conventional tests of these isolates were performed. Molecular identification of two isolates carrying the bacteriocin gene and having antimicrobial activity by agar disc diffusion method was performed by 16S rRNA sequence analysis. As a result, the seven isolates were identified as Aerococcus urinaeequi (EK1), Streptococcus salivarius (EK2), Leuconostoc mesenteroides (EK3), Macrococcus caseolyticus (EK4), Lactococcus garvieae (EK5), Staphylococcus saprophyticus (EK6) and Lactobacillus sakei (EK7). Among these strains, it has been determined that Ln. mesenteroides and L. sakei carried the mecentericin and sacacin genes. When antimicrobial activity against different strains was examined, inhibition formations of Ln. mesenteroides and L. sakei on Enterococcus faecalis, Shigella dysenteriae and Escherichia coli O157: H7 were observed.

    • SDG 2 · Açlığa Son
    AtıfScopus8WoS6OpenAlex7
    ScopusWeb of Scienceİncele
  • MakaleAçık Erişim2020Scopus SJRQ2
    Estimation of natural radionuclides’ concentration of the plutonic rocks in the Sakarya zone, Turkey using multivariate statistical methods

    Yalcin, Fusun; Ilbeyli, Nurdane; Demirbilek, Mehmet; Yalcin, Mustafa Gurhan; Gunes, Alper; Kaygusuz, Abdullah; Ozmen, Suleyman Fatih

    The study aimed to determine the natural radioactivity levels of226Ra,232Th, and40K by the Gamma-Ray spectrometry method, and radiological hazard parameters of the plutonic rocks in the Western and Central Sakarya Zone and to analyze the data using multivariate statistical methods. The average radiological values of samples were determined as40K (1295.3 Bq kg−1) >232Th (132.1 Bq kg−1) >226Ra (119.7 Bq kg−1). According to the skewness values of the distributions of the examined radionuclides,226Ra (2.1) and232Th (0.7) seemed to be positively right-skewed while40K (−0.2) had a negatively right-skewed histogram. On the other hand, the following kurtosis values were calculated for the distributions:226Ra (5.8 > 3),232Th (−0.7), and40K (−0.8). Kolmogorov–Smirnov and Shapiro–Wilk tests were applied to the data to test their normality. Therefore, Spearman’s correlation coefficient method was performed. The radionuclides of226Ra and232Th were found to have a positive correlation with radiological hazard parameters of the samples. 2 (two)-related factors identified, and the cumulative value was calculated to be 98.7% on the basis of the Scree Plot. According to the hierarchical cluster analysis, the samples that are grouped with those from Camlik region are prominent. The average radioactivity values of Camlik, Sogukpinar, Karacabey, and Sogut (except for232Th) regions were detected to be higher than the world averages while the value of40K was also found to be higher than the average values of various countries in the world.

    AtıfScopus36WoS30OpenAlex37
    ScopusWeb of Scienceİncele
  • MakaleAçık Erişim2020Scopus SJRQ3
    The second order of ADS for reverse parabolic boundary value problem with integral condition

    Ashyralyyev, Charyyar

    Finite difference method to solve nonlocal reverse parabolic (RP) problem with integral condition are applied. The second order of accuracy difference scheme (ADS) for approximation of RP problem is proposed. Stability estimates (SEs) for solutions of this difference scheme (DS) are proved. Later, we propose the second order of ADS for approximation of multidimensional RP boundary value problem (BVP) with first kind boundary condition (BC) and establish SEs for its solu-tion. Numerical illustration for simple test problems is given.

    AtıfScopus4WoS1OpenAlex5
    ScopusWeb of Scienceİncele
  • MakaleAçık Erişim2020
    RP-HPLC-UV Analysis of the Phenolic Compounds, Antimicrobial Activity Against Multi-Drug Resistant Bacteria and Antioxidant Activity of Fruit and Seed of Diospyros lotus L.

    Akar, Zeynep; Karakurt, Aylin; Okumus, Funda; Cinemre, Sedanur; Duzgun, Azer Ozad; Akar, Bulent; Can, Zehra

    The object of the present study was to investigate the antioxidant, antimicrobial activity and phenolic compounds of fruit and seeds of Diospyros lotus L. The fruits consumed by humans as nutrients were harvested from the plants that grow naturally in the province of Trabzon-Akçaabat, Eastern Black Sea Region of Turkey. The antioxidant activities of fruit and seeds of Diospyros lotus were determined by using four methods (% DPPH radical scavenging activity, FRAP antioxidant power determination, CUPRAC reducing antioxidant activity and total phenolic content (TPC) in five different proportion of methanol-water extracts. All extracts of fruit and seeds of D. lotus analyzed through whole antioxidant analysis methods showed significant antioxidant activity. In addition, antimicrobial activity of fruit and seeds extracted with DMSO was determined against seven standard bacteria and three multi-drug resistance clinical strains. Although fruit extracts did not have the antimicrobial activity against bacteria, seeds showed antimicrobial effect to both standard strains (Gram-negative and Gram-positive) and antibiotic resistance clinical isolates (Klebsiella pneumoniae carrying blaKPC, Acinetobacter baumannii, harboring blaOXA-23 gene and resistance to colistin, and multi-drug resistant Pseudomonas aeruginosa). MICs’ value of plant seed extracts for standard strains was 0.75-25 mg/mL and antibiotic resistant clinical bacteria were 12.5 and 25 mg/mL. Additionally, phenolic compounds in methanol extracts of fruit and seeds were also determined in by HPLC using 19 standards. Gallic acid and chrysin phenolic compounds were the major phenolic compounds in fruit and seeds, respectively.

    • SDG 3 · Sağlık ve Kaliteli Yaşam
    AtıfScopus8OpenAlex9TR Dizin3
    ScopusTR Dizinİncele
  • MakaleAçık Erişim2020Scopus SJRQ3
    Investigation of healthy living strategies in elderly who achieved to live long and healthy

    Sahinoz, Turgut; Sahinoz, Saime

    Objective: To determine the lifestyles, healthy living strategies and socio-cultural characteristics of elderly people who lived long and healthy. Methods: This study was a cross-sectional study. This study was conducted on 472 elderly patients, aged 80 years and over, selected by random sampling method. The socio-demographic characteristics and daily living activities of the elderly were determined by face to face interview technique using the “Elderly Questionnaire” developed by the researchers in 2018. Chi-square test was used for statistical analysis. Results: Based on the average age (84) of the elderly in the research group, it was seen that they were able to exceed the average life expectancy of their fathers (72) and mothers (73). It has been found that the participants live 11-12 years longer than their parents. It was also found that more than half (51.9%) of the elderly have the habit of walking regularly every day. It was determined that the elderly mostly consumed vegetables and fruits (88.5%), milk and dairy products and meat, respectively. Conclusion: The elderly stated that natural and healthy nutrition, working and staying away from stress in the top three places as the reason of their long and healthy life.

    • SDG 2 · Açlığa Son
    • SDG 3 · Sağlık ve Kaliteli Yaşam
    AtıfScopus6WoS5OpenAlex9
    ScopusWeb of SciencePubMedİncele
  • MakaleAçık Erişim2020Scopus SJRQ3
    Effects of elevation on the aboveground biomass and carbon stock in the oriental beech (Fagus orientalis lipsky) forests of the Sinop region, Turkey

    Kahyaoğlu, N.; Kara, Ö.; Güvendi, E.

    In this study it was our aim to assess the amount of aboveground biomass and carbon stock of beech stands based on elevation. To achieve this, in the research area, 55 trial sites were chosen by selective sampling method depending on elevation climatic zones (400–600 m, 600–800 m, 800–1000 m). In these trial areas, 55 trees were cut down and the weights of their bark, leaves, stem and branches were determined. The carbon content of each component was calculated. The results of the study showed that, in all elevation zones, the stem wood had the highest average biomass and carbon stock values of all the tree components (for the 400–600 m, biomass was 199.19 kg and carbon stock was 95.82 kg; for the 600–800 m, biomass was 378.75 kg and carbon stock was 182.49 kg; for the 800–1000 m, biomass was 372.56 kg and carbon stock was 183.39 kg). This was followed by the branches, bark and leaves in descending order. The aboveground biomass in the single tree components of leaves, branches, stem and total biomass, all except the biomass of their bark varied with elevation in oriental beech stands, which are economically significant species in Turkey.

    • SDG 13 · İklim Eylemi
    • SDG 15 · Karasal Yaşam
    AtıfScopus4WoS3OpenAlex8
    ScopusWeb of Scienceİncele
  • MakaleAçık Erişim2020Scopus SJRQ3
    Single production of composite electrons at future sppc-based lepton–hadron colliders

    Caliskan, A.

    We consider the production of excited electrons with spin-1/2 at future SPPC-based electron–proton colliders with center-of-mass energies of 8.4, 11.6, 26.6, and 36.8 TeV. These exotic particles are predicted in the composite models. We calculate the production cross sections and concentrate on the photon decay channel of the excited electrons with the process of ep → e*X → eγX. The pseudo rapidity and transverse momentum distributions of the electrons and photons in the final state have been plotted to determine the kinematical cutoffs best suited for discovery of the excited electrons. By applying these cutoffs we compute 2σ, 3σ, and 5σ contour plots of the statistical significance of the expected signal in the parameter space (L, m*), where L denotes the integrated luminosity of the collider and m* is the mass of the composite electrons.

    AtıfScopus2WoS2OpenAlex3
    ScopusWeb of Scienceİncele
  • MakaleAçık Erişim2020Scopus SJRQ2
    In situ monitoring of sugar content in breakfast cereals using a novel ft-nir spectrometer

    Aykas, Didem Peren; Ball, Christopher; Menevseoglu, Ahmed; Rodriguez-Saona, Luis E.

    This research demonstrates simultaneous predictions of individual and total sugars in breakfast cereals using a novel, handheld near-infrared (NIR) spectroscopic sensor. This miniaturized, battery-operated unit based on Fourier Transform (FT)-NIR was used to collect spectra from both ground and intact breakfast cereal samples, followed by real-time wireless data transfer to a commercial tablet for chemometric processing. A total of 164 breakfast cereal samples (60 store-bought and 104 provided by a snack food company) were tested. Reference analysis for the individual (sucrose, glucose, and fructose) and total sugar contents used high-performance liquid chromatography (HPLC). Chemometric prediction models were generated using partial least square regression (PLSR) by combining the HPLC reference analysis data and FT-NIR spectra, and associated calibration models were externally validated through an independent data set. These multivariate models showed excellent correlation (Rpre ≥ 0.93) and low standard error of prediction (SEP ≤ 2.4 g/100 g) between the predicted and the measured sugar values. Analysis results from the FT-NIR data, confirmed by the reference techniques, showed that eight store-bought cereal samples out of 60 (13%) were not compliant with the total sugar content declaration. The results suggest that the FT-NIR prototype can provide reliable analysis for the snack food manufacturers for on-site analysis.

    • SDG 2 · Açlığa Son
    AtıfScopus15WoS14OpenAlex14
    ScopusWeb of Scienceİncele
  • MakaleAçık Erişim2020Scopus SJRQ3
    Effects of starter culture and storage on volatile profiles and sensory characteristicof yogurt or cream butter; [Utjecaj starter kulture i skladištenja na hlapive sastojke i senzorska svojstva maslaca od vrhnja i maslaca od jogurta]

    Gundogdu, Engin; Cakmakci, Songul; Hayaloglu, Ali Adnan

    In this study volatile compounds and sensory properties of butter produced from cream or yogurt using Lactococcus lactis subsp. lactis biovar. diacetylactis or Leuconostoc mesenteroides subsp. cremoris as well as a mixture of these two bacteria were investigated over 60 days. A total of 10 esters, 6 aldehydes, 11 ketones, 16 alcohols, 6 acids, 2 sulphides, 3 terpenes, and 3 miscellaneous compounds were detected. There were more volatile compounds in cream butter than in yogurt butter. While S-methyl thioacetate was only found in yogurt butter samples, hexanal, ethanol, 2-nonanone, 2-pentanone, 2-heptanone, acetic, butanoic (butyric) and hexanoic acid were the most abundant volatiles in both cream and yogurt butter. The results showed that the use of starter in the manufacturing of yogurt butter, which is traditionally produced without starters, affected the volatile compounds and sensory properties. The highest general acceptability scores were given to the butter samples containing mixed cultures at the end of storage.

    • SDG 2 · Açlığa Son
    AtıfScopus16WoS15OpenAlex16
    ScopusWeb of Scienceİncele
  • MakaleAçık Erişim2020
    Political Polarization and Size of Government; [Politik Kutuplaşma ve Devletin Ekonomik Boyutu]

    Keyifli, Nazlı; Akdede, Sacit Hadi

    In this study, it empirically examines the impact of economic and political determinants on the economic size of the government. Political polarization is taken as the variable of interest, along with other control variables. Statistical analysis was carried out using the Ordinary Least Squares and Second Stage Least Squares methods. The scope of the paper includes 61 countries, and the time interval is between 1990 and 2015. The results of the regression analysis show that the share of public consumption spending in national income in countries where political polarization is high is declining. In addition, the increase in levels of ethnic fracturalization, democracy and government fractionalization has an increasing effect on the share of public consumption spending in national income. The study provides descriptive linkages among findings.

    • SDG 8 · İnsana Yakışır İş ve Ekonomik Büyüme
    • SDG 16 · Barış, Adalet ve Güçlü Kurumlar
    AtıfScopus1OpenAlex4TR Dizin5
    ScopusWeb of ScienceTR Dizinİncele
  • MakaleAçık Erişim2020
    A note on well-posedness of source identification elliptic problem in a Banach space; [Банах кеңiстiгiнде дереккөздi сәйкестендiруде эллипстiк есептiң корректiлiгi туралы ескерту]; [Замечание о корректности эллиптической задачи идентификации источника в банаховом пространстве]

    Ashyralyev, A.; Ashyralyyev, C.; Zvyagin, V.G.

    We study the source identification problem for an elliptic differential equation in a Banach space. The exact estimates for the solution of source identification problem in Hölder norms are obtained. In applications, four elliptic source identification problems are investigated. Stability and coercive stability estimates for solution of source identification problems for elliptic equations are obtained.

    AtıfOpenAlex1
    ScopusWeb of Scienceİncele
  • MakaleAçık Erişim2020Scopus SJRQ2
    The effect of shape-controlled pt and pd nanoparticles on selective catalytic hydrodechlorination of trichloroethylene

    Sarıbıyık, Oğuz Yunus; Rupprechter, Günther; Weilach, Christian; Serin, Selahattin

    Tailoring the shape of nanoscale materials enables obtaining morphology-controlled surfaces exhibiting specific interactions with reactants during catalytic reactions. The specifics of nanoparticle surfaces control the catalytic performance, i.e., activity and selectivity. In this study, shape-controlled Platinum (Pt) and Palladium (Pd) nanoparticles with distinct morphology were produced, i.e., cubes and cuboctahedra for Pt and spheres and polyhedra/multiple-twins for Pd, with (100), (111 + 100), curved/stepped and (111) facets, respectively. These particles with well-tuned surfaces were subsequently deposited on a Zirconium oxide (ZrO2 ) support. The morphological characteristics of the particles were determined by high resolution transmission electron microscopy (HR-TEM) and X-ray diffraction (XRD), while their adsorption properties were investigated by Fourier transform infrared spectroscopy (FTIR) of CO adsorbed at room temperature. The effect of the nanoparticle shape and surface structure on the catalytic performance in hydrodechlorination (HDCl) of trichloroethylene (TCE) was examined. The results show that nanoparticles with different surface orientations can be employed to affect selectivity, with polyhedral and multiply-twinned Pd exhibiting the best ethylene selectivity.

    AtıfScopus17WoS17OpenAlex18
    ScopusWeb of Scienceİncele