Gümüşhane ÜniversitesiGümüşhane ÜniversitesiAçık Erişim Arşivi · RDL Open

Sürdürülebilir Kalkınma Amaçları

Yazarlar

Yayınlar

Yeniden eskiyeEskiden yeniye
  • MakaleAçık Erişim2024
    Analysis of a discrete time fractional-order Vallis system

    ŞİŞMAN, Şeyma; MERDAN, Mehmet

    Vallis system is a model describing nonlinear interactions of the atmosphere and temperature fluctuations with a strong influence in the equatorial part of the Pacific Ocean. As the model approaches the fractional order from the integer order, numerical simulations for different situations arise. To see the behavior of the simulations, several cases involving integer analysis with different non-integer values of the Vallis systems were applied. In this work, a fractional mathematical model is constructed using the Caputo derivative. The local asymptotic stability of the equilibrium points of the fractional-order model is obtained from the fundamental production number. The chaotic behavior of this system is studied using the Caputo derivative and Lyapunov stability theory. Hopf bifurcation is used to vary the oscillation of the system in steady and unsteady states. In order to perform these numerical simulations, we apply Grünwald–Letnikov tactics with Binomial coefficients to obtain the effects on the non-integer fractional degree and discrete time vallis system and plot the phase diagrams and phase portraits with the help of MATLAB and MAPLE packages.

    İncele
  • MakaleYalnız künye2024
    Three novel 1,2,3-triazole-fused compounds: Syntheses, structural and spectroscopic characterizations with molecular modeling

    Ejder, Esengül; Onur, Sultan; Yıldırım, Arzu Özek; Yıldırım, Muhammet Hakkı; Tümer, Ferhan

    In this study, we report syntheses, structural and spectroscopic characterizations, and molecular modeling of three novel triazole fused compounds: 4-((4-methoxyphenoxy)methyl)-1-(4-methoxyphenyl)-1H-1,2,3-triazole, 1-(4-isopropylphenyl)-4-((4-methoxyphenoxy)methyl)-1H-1,2,3-triazole, and 1-(4-fluorophenyl)-4-((4-methoxyphenoxy)methyl)-1H-1,2,3-triazole. Their molecular structures and intermolecular interactions were elucidated using single-crystal X-ray crystallography. The compounds crystallize in the P-1 and P21/c space groups with weak C−H∙∙∙N and C-H∙∙∙O interactions. Hirshfeld surface analyses revealed the complex network of intermolecular interactions, determining that in all three compounds, an average of 13 % of the packing interactions were due to hydrogen bonds, and an average of 25 % were due to C-H···π interactions. Since the compounds differ from each other by only one substituent (methoxy, isopropyl, and fluorine) in their phenyl ring, their experimental infrared spectra were clarified by comparing them with the calculated ones. NMR spectroscopy was employed to examine the behavior of the compounds in solution. Conformational scans revealed that the energy differences between conformers are low, indicating potential conformations in which compounds could exist in solution. Nonlinear optical properties were calculated to evaluate the potential of the compounds for optical applications, particularly emphasizing the significantly larger values seen for two compounds compared to a reference compound. Finally, molecular electrostatic potential maps were generated to visualize the charge distribution and potential electrophilic and nucleophilic attack regions.

    İncele
  • MakaleAçık Erişim2024
    Anti-inflammatory activities of some Anthemis species used in the treatment of inflammation-related diseases, GC/MS and LC-MS/MS analysis with bioactivity-guided fractionation

    Yıldırım, Aybeniz; Gül, Abdulkadir; Başaran, Nihal; Şen, Ali; Bitiş, Leyla; Tanyıldızı, M.Şaban

    Recent studies have focused on Anthemis sp. because of their rich chemical composition and application in the treatment of diseases associated with inflammation. The purpose of this study was to determine the active chemicals responsible for the anti-inflammatory properties of Anthemis cotula, A. tomentosa, A. austriaca, and A. tinctoria var. tinctoria. Therefore, the 5-Lipoxygenase (5-LOX) was used to assess the anti-inflammatory properties of methanol extracts that were extracted from the aerial parts of the mentioned species, with an IC50 value of 23.88 μg/mL, the methanol extract of A. tinctoria var. tinctoria demonstrated anti-inflammatory effects close to the standard (Indomethacin, IC50: 18.05 μg/mL). Compared to the other extracts, the methanol extract of A. tinctoria var. tinctoria demonstrated significantly greater anti-inflammatory activity. A. tinctoria var. tinctoria and A. tomentosa methanol extracts, which were the most active in comparison to other extracts, were fractionated using the bioactivity-guided fractionation method. Their anti-inflammatory properties were evaluated to determine the compounds responsible for the activity. With an IC50 value of 3.44 μg/mL, the ethyl acetate fraction of A. tinctoria var. tinctoria (ATiEA) was found to be the most active of all the fractions. After ATiEA was further fractionated using column chromatography, it was found that ATiEA-II, one of its sub-fractions, was more effective than other sub-fractions against the 5-LOX, with an IC50 value of 2.93 μg/mL. Furthermore, the sub-fractions' total phenol and flavonoid contents were examined to confirm their anti-inflammatory properties. The sub-fraction ATiEA-II exhibited higher total flavonoid content (743,86 μg QE/g dry weight) and total phenol content (4659.36 μg GA/g dry weight) than other sub-fractions, which was in line with its anti-inflammatory activity. GC/MS and LC-MS/MS were used to clarify the effective compounds of the sub-fraction ATiEA-II. Experiments on the anti-inflammatory properties of different Anthemis sp. have demonstrated the good anti-inflammatory potential of this species. Specifically, ATiEA-II, a sub-fraction of A. tinctoria var. tinctoria, may contain a novel anti-inflammatory drug molecule.

    İncele
  • MakaleAçık Erişim2024
    Effect of micro-arc oxidation coatings with graphene oxide and graphite on osseointegration of titanium implants-an in vivo study

    Tekin, Bahar; Dundar, Serkan; Tekin, Samet; Emine Sukuroglu, Ebru; Khurshid, Zohaib; Ezgi, Yusuf; Demirci, Fatih; Faheemuddin, Muhammad

    Background: This in vivo study evaluated the effect of graphene oxide and graphite coatings, coupled with the micro-arc oxidation (MAO) surface roughening technique, known for their mechanical strength, chemical stability, and antibacterial properties. The main objective was to assess the degree of improvement in osseointegration of titanium implants resulting from these interventions. Materials and methods: In this study, 32 female rats were utilized and randomly allocated into four groups (n = 8 each): machined surface titanium implants (control), those roughened by the MAO method, those coated with graphene oxide-doped MAO, and those with a graphite-doped MAO coating. Titanium implants were surgically placed in the right tibia of the rats. Rats undergoing no additional procedures during the 4-week experimental period were sacrificed at the end. Then, the implants and surrounding bone tissues were separated and embedded in acrylic blocks for reverse torque analysis. Using a digital torque device, the rotational force was applied to all samples using a hex driver and racquet until implant separation from the bone occurred, with the corresponding values recorded on the digital display. Then, statistical analysis was performed to analyze the data. Results: No statistically significant difference between the groups was observed in the biomechanical bone–implant connection levels (N/cm) (P = 0.268). Post-hoc tests were not required because no discernible differences were identified between the groups. Conclusion: Within the scope of this study, implants treated with the MAO method, along with those coated with graphene oxide- and graphite-doped MAO method, did not exhibit significant superiority in terms of osseointegration compared to machined surface titanium implants.

    • SDG 3 · Sağlık ve Kaliteli Yaşam
    İncele
  • MakaleAçık Erişim2024
    Damage assessment of Siverek Castle during the Kahramanmaraş Earthquakes (Mw 7.7 and Mw 7.6) on 06 February 2023: Remediation and strengthening proposals

    Nasery, Mohammad Manzoor; Çelik, Muhammet; Şadoğlu, Erol

    On February 6, 2023, two significant earthquakes with magnitudes (Mw) of 7.7 and 7.6 struck Turkey, occurring nine hours apart. In addition to the tragic loss of over 50,000 lives in the earthquakes centered in Kahramanmaraş, hundreds of thousands of engineering structures, such as residences, schools, hospitals, historical landmarks, highways, and more, were severely damaged. This study assesses the damages and risk scenario following the Kahramanmaraş earthquakes concerning Siverek Castle. In addition, remediation and strengthening proposals, required to eliminate the damage and the possible risk, have been developed. The initial stage involved observational damage assessments on the castle and surrounding slopes as part of field studies, identifying five different types of damage and potential risks. Subsequently, a precise 3D digital model of the damaged castle and its slopes was generated using the digital photogrammetry method. Additionally, geological and geophysical studies were conducted in the field to determine the characteristics of the mound structure, historical castle walls, soil and rock on the slope. Non-destructive, geophysical methods consisting Vertical Electrical Sounding (VES), Seismic Refraction Method (SRM) and Multichannel Analysis of Surface Waves (MASW) measurements were specifically employed in the area with historical remnants. To verify the obtained data, five boreholes were drilled in the lower parts of the slope, and experimental studies were conducted to determine the soil and rock material properties of the slope. In the numerical studies, a total of 54 2D stability analyses were performed under static, long-term static, and dynamic conditions. Additionally, 1000 different probabilistic rockfall analyses were conducted, both in 2D and 3D, to calculate the run-out distance, bounce height, velocity, and kinetic energies of the blocks that fell or were about to fall during the earthquake. In the final stage of the study, remediation and strengthening recommendations were prepared for the strengthening of the fortification walls and slopes where failures occurred, and stability analyses were conducted. Consequently, a design proposal recommending five distinct approaches to remediate and strengthen the castle and slopes impacted by the Kahramanmaraş earthquakes was endorsed by the relevant authorities, and construction has commenced. When the remediation and strengthening works are completed, the security of the cultural heritage will be ensured, and it is planned to be opened to visitors.

    • SDG 11 · Sürdürülebilir Şehirler ve Topluluklar
    İncele
  • MakaleAçık Erişim2024
    The impact of implementing backbone architectures on fracture segmentation in X-ray images

    Turk, Salih; Bingol, Ozkan; Coskuncay, Ahmet; Aydin, Tolga

    X-ray imaging is widely utilized for the detection of bone fractures due to its affordability, rapid processing capabilities, broad accessibility, and ease of use. Despite these advantages, the intricate analysis of X-ray images necessitates advanced computational techniques to fully exploit their rich informational content. Notably, accurate segmentation of these images plays a critical role in aiding medical professionals with precise diagnoses and effective treatment planning. This study examines the impact of integrating different backbone architectures for the task of fracture segmentation in X-ray images. Specifically, the research focuses on enhancing the widely-used DeepLabV3 model by incorporating pre-trained networks such as ResNet50, ResNet101, and MobileNetV3 into the encoder component to improve feature extraction and segmentation accuracy. The FracAtlas dataset, which presents unique challenges due to its small size and the diversity of fractures from various anatomical regions, was employed for model evaluation. Data augmentation techniques were implemented to expand the dataset, and an additional subset focusing on cropped images of fracture areas was developed. The models were trained over 50 epochs, and their performance was assessed using metrics such as Intersection over Union (IoU), loss values, and Dice scores. The results indicate that the DeepLabV3 model with ResNet-based backbones achieved IoU values exceeding 0.93 on the original dataset and demonstrated outstanding performance on the augmented and cropped datasets, with AUC values reaching up to 0.99. The study also highlights the computational complexity of the models, with ResNet101 exhibiting the highest time complexity, while MobileNetV3 was the most efficient in terms of processing time and memory consumption.

    İncele
  • MakaleYalnız künye2024
    Spatiotemporal analysis of transition probabilities of wet and dry days under SSPs scenarios in the semi-arid Susurluk Basin, Türkiye

    Şan, Murat; Nacar, Sinan; Kankal, Murat; Bayram, Adem

    Precipitation, especially in regions dominated by the Mediterranean climate, is one of the most critical parameters of the hydrological cycle and the environment affected by climate change. One the one hand, the transition probabilities of wet and dry days in precipitation occurrence are a relatively new topic, on the other hand these are essential in defining the regional climate. For the first time, spatiotemporal variations of transition probabilities of wet and dry days in the Susurluk Basin, northwestern Türkiye, dominated by a semi-arid Mediterranean climate and also having a mountain climate, were analyzed based on the observation (1979–2014) and future terms (2030–2059 as short and 2070–2099 as long), under four Shared Socioeconomic Pathways (SSPs) scenarios. To do this, statistical downscaling was performed for 14 general circulation models (GCMs) from the CMIP6. By applying an ensemble of four high-performing GCMs, four indices for transition probabilities of wet and dry, i.e., a dry day following a dry day (FDD), a wet day following a dry day (FDW), a dry day following a wet day (FWD), and a wet day following a wet day (FWW), were calculated, and their changes were determined statistically. Monotonic and partial trends of the indices were also analyzed. According to the results, the FDD will increase in water year and wet period and autumn in the future, especially for the long term, in the basin dominated by the FDD (75 % in water year). The risks are higher in the western part of the basin, where human activities are intense, as the FDD is higher in this part than other parts especially in summer (90–100 %) in SSP3-7.0 and SSP5-8.5 scenarios for the long term. So, the length of consecutive dry days in the wet period and water year will increase in the basin, thus increasing the likelihood of droughts. As for the intra-term trends, the FDD increases and the FWW decreases in the water year and seasons in SSP3-7.0 and SSP5-8.5, contrary to the observation term.

    • SDG 6 · Temiz Su ve Sanitasyon
    • SDG 13 · İklim Eylemi
    İncele
  • MakaleAçık Erişim2023
    Geochemical and radiometric data for mafic rocks from the Guleman Ophiolite (SE, Turkey): New insights on the geodynamic evolution of the southern Neo-Tethyan ocean

    Sapancı, Özgür; Tokat, Gürkan; Eraslan, Nuh Kadri; Karakaya, Abdullah Onur; Gücer, Mehmet Ali; Çimen, Okay

    The Guleman Ophiolite is located in the southeast of Turkey and mainly consists of harzburgites and dunites hosting economically viable chromitite bodies, and lesser amounts of cumulate and isotropic gabbro, diabase dykes, pyroxenite and locally plagiogranite. This study reports the combined whole-rock geochemical and radiogenic isotope (Sr and Nd) data for gabbro and diabase dykes, and in-situ zircon U-Pb geochronological data for plagiogranite and gabbro from the Guleman Ophiolite. Two different geochemical groups were determined based on immobile minor and trace elements, and radiogenic isotope characteristics of gabbro and diabase dykes investigated here. The first group is represented by boninites and displays highly depleted elemental patterns compared to NMORB, and spoon-shaped rare earth element profiles. Contrarily, the second group resembles back-arc basin basalts and is characterized by NMORB-like rare earth element patterns associated with negative Nb anomalies. The boninitic samples are characterized by less radiogenic 143Nd/144Nd(i) (0.51229 to 0.51267; ƐNd = −4.8 to +2.7) and more radiogenic 87Sr/86Sr(i) (0.70549 to 0.70758) isotope compositions compared to the back-arc basin basalt-like samples (143Nd/144Nd(i) = 0.51289 to 0.51296; ƐNd = +7.0 to +8.4; 87Sr/86Sr(i) = 0.70496 to 0.70629), indicating derivation from distinct and/or heterogeneous mantle source regions within a supra-subduction zone. The LA–ICP–MS zircon U-Pb analyses yielded concordant late Cretaceous ages for gabbro (82 ± 2.9 Ma) and plagiogranite (79.9 ± 0.8 Ma) samples. The overall geochemical, isotopic and geochronological data presented here suggest that the Guleman Ophiolite consists of forearc and initial back-arc spreading sections of oceanic crust, which may have been formed in an intra-oceanic subduction zone within the Berit Ocean (northern branch of the southern Neo-Tethyan ocean). Moreover, the generation of continental arc magmatism (i.e. Baskil and Esence Granitoids) was well-documented on the active margin of the Malatya-Keban Metamorphics to the north. Therefore the closure of this oceanic basin should have resulted in multiple coeval northward subduction events during the late Cretaceous.

    İncele
  • MakaleYalnız künye2023
    Interpretation of the tectonic structure of Gemlik Bay using magnetic data

    Aktaş, Gülten; Hisarlı, Z. Mümtaz; Demirel, A. Sinan

    The aim of this study was to determine the effects of the main faults and many small-scale faults and submarine structures within Gemlik Bay, on the middle strand of the North Anatolian Fault in the southeast of the Sea of Marmara. In order to produce a fault map for the study area and research tectonic structures, magnetic data were obtained using a cesium vapor magnetometer on a total of 30 profiles (340 km) with N-S and E-W orientation within the bay. Diurnal corrections were applied to obtain the necessary minimization of diurnal variations in the magnetic data. Heading correction and micro-leveling corrections were applied to remove small boat effects, and the reduction to the pole method was applied for greater differentiation of the magnetic data. Magnetic data were analyzed using advanced potential field processing techniques. Euler deconvolution technique was applied to define the extension and depth of the determined lineaments. Boundaries of structures in the region were determined using source edge detection, tilt derivative, the tilt angle of the total horizontal gradient amplitude (TAHG), and a novel edge detector based on the softsign function (SF) techniques. In order to reveal the tectonic evolution of Gemlik Bay, the structures obtained from the analysis results were interpreted and a fault map was produced. The results of the study identified the Armutlu Fault in the north, the Gemlik Fault in the east, the Zeytinbağı Fault and Mudanya Fault in the southwest and the Gençali Fault in the south within Gemlik Bay. These five essential faults significantly affected the region tectonically. These faults correlated well with the location of some previously-known major tectonic structures. Moreover, these important faults following the morphology of the bay indicate that Gemlik Bay was opened by a pull-apart basin mechanism.

    İncele
  • MakaleYalnız künye2023
    The effectiveness of post-disaster psychotherapeutic interventions: A systematic review and meta-analysis study

    Semerci, Murat; Uzun, Sevda

    Objective: This study aimed to determine the level of impact of post-disaster psychotherapeutic interventions. Material method: For this systematic review and meta-analysis study, the studies were accessed through the databases of PubMed, Web of Science, EBSCOhost, Google Scholar, and YÖK Thesis Center in July-September 2022 without any year limitation. As a result of the examinations, 27 studies were included in the study. The data were synthesized by meta-analysis and narrative methods. Results: According to the results of this systematic review and meta-analysis, post-disaster psychotherapeutic interventions were found to be effective (SMD:−0838, %95 CI: −1,087- 0.588; Z = −6588, p = 0.000, I2 = %95,249). Individuals who have undergone psychotherapeutic interventions experience either no or fewer post-traumatic stress disorder symptoms. The country/continent of the research, the types of psychotherapeutic interventions, the type of disaster, and the measurement tool used influence the effectiveness of the psychotherapeutic interventions. Psychotherapeutic interventions applied especially after earthquakes, one of the types of disasters, were found to be effective. In addition, EMDR, cognitive behavioral therapy, psychotherapy, and exposure method were found to reduce posttraumatic stress disorder symptoms in individuals in the post-disaster period. Conclusion: Post-disaster psychotherapeutic interventions have positive impacts on people and improve their mental health.

    • SDG 3 · Sağlık ve Kaliteli Yaşam
    İncele
  • MakaleYalnız künye2023
    Calculation of radiation shielding parameters of YBa2Cu3O7 and Y3Ba5Cu8O18 superconductors for the energies from 122 to 1332 keV using EGS4 code

    Kaya, Selim

    This Study aims to evaluate the radiation shielding efficiency of YBa2Cu3O7 and Y3Ba5Cu8O18 superconducting ceramics. In the current study, the radiation shielding efficiency of YBa2Cu3O7 and Y3Ba5Cu8O18 superconducting ceramics were calculated using the EGS4 code and discussed experimentally and theoretically by comparing with XCOM data. The mass attenuation coefficients (μ/ρ) for YBa2Cu3O7 and Y3Ba5Cu8O18 superconductors and their contents was investigated theoretically (EGS4 and WinXcom) and experimentally at gamma-ray energies from 122 to 1332 keV. The theoretical values have been computed in the energy range from 1 keV to 100 MeV using WinXcom program. Then, using the mass attenuation coefficients, it was determined some shielding parameters such as mean free path (MFP), half value layer (HVL), effective atomic number (Zeff), radiation protection efficiency (RPE) and gamma–ray kerma coefficients ((kγ). It has been seen that the theoretical and the empirical results were in agreement. The data and findings from this study can guide further research and development of shielding materials for gamma-ray and neutron shielding applications.

    İncele
  • MakaleAçık Erişim2023
    On the solutions of fractional random ordinary differential equations with the Residual power series method

    Merdan, Mehmet; Atasoy, Nihal

    In this study, random ordinary differential equations obtained by randomly choosing the coefficients or initial conditions of the ordinary differential equations will be analyzed by the Residual Power Series Method. The initial conditions or coefficients of the equations will be converted to random variables with Normal, Gamma and exponential distribution. Probability characteristics such as expected value, variance and confidence interval of the obtained random ordinary differential equations will be calculated. Obtained results will be drawn with the help of MATLAB (2013a) package program and random results will be interpreted.

    İncele
  • MakaleYalnız künye2023
    Enhanced wear resistance and surface properties of oxide film coating on biocompatible Ti45Nb alloy by anodization method

    Şenaslan, Fatih; Taşdemir, Muharrem; Çelik, Ayhan; Bozkurt, Yusuf Burak

    β-Titanium alloys have become increasingly popular as biomaterials because of their low modulus of elasticity and superior corrosion properties in recent years. β-titanium alloy containing niobium is also a biocompatible and non-toxic material. Among β-Ti alloys, Ti45Nb is one of the most remarkable alloys for its superior properties as a biomaterial. This alloy has superior properties due to low elasticity modulus and non-toxic elements, but its surface properties are inadequate for biomaterial applications. Therefore, various surface treatments are applied to improve the surface properties of these alloys. In this study, an oxide film layer was formed on the Ti45Nb surface under different potential conditions by the anodizing method. The effects of these factors on friction, wear, and contact angle measurements were investigated. The structural properties of the oxide film coated samples were analyzed with XRD and their surfaces and cross-sectional images were observed by SEM. Also, the surface roughness and nanoindentation tests were performed. In this regard, it was determined that oxide film thickness, surface roughness and hardness increased with the increase of anodization potential. The contact angle of the samples decreased with the increase in the anodization potential and the surface tension of the materials increased. The highest nanohardness of about 4.19 GPa was obtained from 150 TA samples. The elasticity modulus of the untreated sample was about 63 GPa, while the anodized samples ranged from an average of 31 to 83 GPa. The wear results revealed that the anodization process improved the wear resistance of the Ti45Nb alloy. As a result, the sample anodized at 200 V for 30 min exhibited optimum surface roughness, morphology and high wear resistance.

    İncele
  • MakaleAçık Erişim2023
    Comparison of the removal efficiencies of Basic red 46 from aqueous solutiousing Aşkale lignite with and without ultrasound assisted processes

    Karaca, Canan; Karaca, Melike; Kıranşan, Murat; Karaca, Semra; Açışlı, Özkan; Gürses, Ahmet

    This study compared the removal efficiencies of Basic red 46 from aqueous solutions with and without ultrasound-assisted processes using lignite as a low-cost adsorbent. The effects of various experimental parameters such as contact time, adsorbent dosage, initial solution, pH, initial dye concentration and temperature on the dye removal efficiency were investigated. The experimental results were modelled by the kinetic and isotherm models. Both of processes fitted well to pseudo-second-order kinetics and the Langmuir model with highest correlation coefficients for all of three temperatures. The results showed that the influence parameters have a different effect on the removal efficiency in the presence and absence of ultrasonic irradiation. When the results obtained for both processes are compared, it is seen that the removal efficiency obtained with the ultrasound assisted process is much higher than that obtained with non-ultrasound assisted process at high dye concentrations. The removal efficiency of ultrasound-assisted and unassisted processes was found to be 81.5% and 54.6%, respectively, at 80 mg/L dye concentration and 60 min. Thermodynamic parameters showed that the adsorption process was spontaneous and exothermic. The enthalpy and entropy changes for the ultrasound-assisted process were –9.35 kJ/mol and –0.03 kJ/K·mol, respectively.

    • SDG 6 · Temiz Su ve Sanitasyon
    • SDG 12 · Sorumlu Üretim ve Tüketim
    İncele
  • MakaleAçık Erişim2023
    Identification of the drivers of and barriers to COVID-19 vaccine intake behavior using a mixed-method design: implications from a developing country

    Kordestani, Arash; Oghazi, Pejvak; Izmir, Onur; Oypan, Oguz; Ozer, Serhat

    Various COVID-19 vaccines are available across the world. However, short phases of clinical trials for emergency use and myriad rumors about and misinformation on vaccines spread through different media sources, induce confusion and trigger vaccine hesitancy behavior. Although clinical trials demonstrated promising results in the ability of vaccines to protect, social endeavor is required for vaccines to succeed. Mitigation of the pandemic is only possible through widespread acceptance of the vaccine. Thus, identifying the factors that impact vaccine intake is crucial. This study determined factors that affect intentions toward vaccination using a mixed-method approach, in which qualitative and quantitative analyses were conducted together. Analysis of variance (ANOVA) is used in the quantitative study, and content analysis is employed in the qualitative study. The final sample of this mixed-method study consists of 568 participants for the quantitative study and 237 for the qualitative study. They were selected using an online questionnaire. Findings suggest that social, psychological, attitudinal, perceptual, and informational factors play a crucial role in shaping people's intentions toward vaccines, ultimately influencing their decision to accept or reject vaccination. Results of both the qualitative and quantitative studies, in parallel with each other, indicated similar barriers against and drivers toward vaccine intake behavior, providing strong insights into the reasons behind vaccine acceptance and hesitancy. Based on the insights gained in this study, a set of recommendations were compiled for policymakers.

    • SDG 3 · Sağlık ve Kaliteli Yaşam
    İncele
  • MakaleAçık Erişim2022
    Investigation of natural radionuclide variations and the possible uranium migration by testing with gamma-ray spectrometer: An example from Tuğlu Tepe and Deliler Sites in Şefaatli/Yozgat, Central Anatolia Region, Turkey

    Altundaş, Suna

    The in-situ gamma-ray spectrometry measurements are performed to define and map natural radionuclide variations and the possible uranium migration on the sandstone in the Central Anatolia Region and Deliler sites in Yozgat, Turkey. The concentrations of radionuclide (eU, eTh, K%) and dose rate values were measured totally on 384 points in both areas with a duration of 5 min at each measurement point. The radionuclide ratios (eTh/K, eU/K, and eU/eTh), geochemical indicators (Ume, F parameter and eU-(eTh/3,5) rate) of uranium remobilization in the rocks, and the hazard parameters were calculated and evaluated by using measured data. The separation of uranium-rich or poor areas was made easily and associated with lithological formations by evaluating all the maps produced together. While the highest concentrations of radionuclide, and dose rate values were recorded in the sandstone units under the cover layer that are Eocene neritic limestones, the lowest concentration values and dose rate were measured on siltstone and claystone in the northern part of the Tuğlu Tepe area. At the Deliler study area, the lower anomaly zones are coincide with the soils used for the cultivation of chickpeas consists of loosely cemented sandy clay siltstone, claystone, gravel, sand, silt, and clay whereas the highest concentrations observed in the outcropped sandstone and limestones. It can be seen that the study areas have variable radioactivity levels as a result of both the weathering from the surrounding granitic rocks and the transport and accumulation of sediments through different factors. On sandstones serving as reservoir rock for uranium mineralization in both Tuğlu Tepe and Deliler sites, there is a uranium migration from the granitic rocks towards these masses and sandstones have been enriched by uranium. As a result of the evaluations, it has been seen that the areas showing uranium enrichment originated from migration can be determined very easily by radioactivity measurements, which is a fast, economical and effective method.

    İncele
  • MakaleYayıncıda açık erişim2022
    Producing maximally entangled Bell type states in an efficient way for quantum teleportation

    Çelik, Necati; Ünal, Nüket

    In quantum teleportation, the sender must interact her/his qubit to one of the qubits in a maximally entangled Bell/Bell-type state and as a result, a joint state is obtained. This joint state has to be rearranged in terms of the appropriate number of Bell/Bell-type states. Then the sender measures her/his qubits and sends the results via a classical channel to the receiver. According to the outcome of the measurement results, the receiver applies appropriate gates to the qubits in her/his share to recover the teleported state. Perhaps the most important step in this protocol is to be able to rewrite the joint state in terms of the appropriate number of Bell-type states. An efficient way to produce Bell-type states for quantum teleportation of an arbitrary n-qubit state is proposed. Quantum teleportation of an arbitrary three-qubit state is studied as an example.

    İncele
  • MakaleYalnız künye2022
    The two-way perspective of tourism undergraduates towards (post-)viral world: The future of tourism, and vocational development and career

    Seyitoğlu, Faruk; Atsız, Ozan; Kaya, Fazıl; Taş, Sedat

    This timely paper explores the future of tourism and vocational career in the Covid-19 period from the perspective of undergraduate tourism students. The data were collected through semi-structured interviews with 30 students majoring in tourism faculty departments following the qualitative methodology. The findings demonstrate that vocational development and career planning in the Covid-19 era and the future of tourism are the main dimensions identifying students’ perspectives. The vocational and psychological pandemic effects are shaping the future career decisions of students. Furthermore, the future of tourism includes the elements related to tourist expectations and behaviours and trends in the (post-)viral tourism.

    • SDG 4 · Nitelikli Eğitim
    • SDG 8 · İnsana Yakışır İş ve Ekonomik Büyüme
    İncele
  • MakaleAçık Erişim2022
    Highly siderophile element and Os isotope systematics of the Cenozoic volcanic rocks from the Eastern Pontides, NE Turkey: Constraints on the origin and evolution of subcontinental mantle-derived magmas

    Arslan, Mehmet; Temizel, İrfan; Ackerman, Lukáš; Yücel, Cem; Yazar, Emel Abdioğlu

    The Cenozoic subalkaline to alkaline volcanic rocks from the Eastern Pontides Orogenic Belt (EPOB) in NE Turkey exhibit wide range of highly siderophile element (HSE) contents and Os isotope compositions that can be related to their mantle sources and parental melt evolution. Although some Eocene rocks show signs of late-stage modification, most of the studied volcanic rocks possess primary HSE and Os systematics. The Eocene volcanic rocks have largely variable PdN/IrN (~0.25–751), PdN/PtN (~0.25–87) and (187Os/188Os)i ratios (~0.113 to 0.51). The Miocene volcanic rocks have high PdN/IrN (~2.6–441), low PdN/PtN (~0.11–1.7) and radiogenic (187Os/188Os)i ratios ranging from ~0.166 to 0.52 while the Mio-Pliocene volcanic rocks show high PdN/IrN of ~7.2–29, low PdN/PtN (~1.2–2.7), and only mildly radiogenic (187Os/188Os)i values between ~0.132 and 0.177. Finally, the Quaternary volcanic rocks have low PdN/IrN (~2.3–3.6), PdN/PtN (~0.9–1.6) and radiogenic (187Os/188Os)i values ranging from ~0.133 to 0.194. Overall, the primitive mantle-normalized HSE patterns of the studied volcanic rocks are characterized by PPGE (Pt, Pd) and Re enrichment with respect to IPGE (Os, Ir, Ru). The variations in HSE and radiogenic Os isotope compositions of the relatively differentiated volcanic rocks indicate that crustal assimilation played active role in their parental melt evolution, especially in the Eocene and Miocene period. Besides, the obtained HSE data also suggest that the parental magmas of all the studied volcanic rocks were generated mainly in the S-saturated conditions. The temporal and spatial HSE and Os isotope variations observed in the studied Cenozoic volcanic rocks reflect the heterogeneity of the mantle source beneath the EPOB, which could be attributed to variations in response of different fluid/melt metasomatism of the underlying SCLM.

    İncele
  • MakaleYalnız künye2022
    Secular variation of magnetic declination for the past 500 years from Empire to Republic in Anatolia

    Maden, Nafiz; Yıldız, Burak

    Seydi Ali Reis first mentioned the declination angle in his book titled Kitab-ı Muhit in 1554. Kitab-ı Cihannüma (1654), Füyuzat-i Mıknatisiye (1731), and Mârifetname (1757) gave the magnetic declination angle values in Anatolia. We have compiled magnetic declination data from 1500 to the present day in Anatolia and Istanbul. The plot of the magnetic declination angle was drawn for the first time using historical data between 1500 and 1947 for Istanbul. Three new magnetic declination maps for the periods of 1909–1910, 1970 and 2009 were produced for Turkey. The annual change map based on the data of 1970 and 2009 is also given for whole Turkey. The agonic line extending in NW-SE direction between Sinop and Antep divides Anatolia into two regions in 1910. The mean declination values obtained from qibla direction measurements made by the Presidency of Religious Affairs in all mosques give 3.11° E for 1970 and 4.74° E for 2009 in Turkey.

    İncele