Sürdürülebilir Kalkınma Amaçları
Yazarlar
- Uzun, Sevda(66)
- Merdan, Mehmet(56)
- Duran, Celal(50)
- Ozdes, Duygu(47)
- Kaygusuz, Abdullah(42)
- Demir, Selim(37)
- Turan, Ibrahim(37)
- Ashyralyyev, Charyyar(34)
- Dokuz, Abdurrahman(33)
- Araz, Onur(31)
- Öztürk, Serkan(31)
- Sipahi, Ferkan(30)
- Kandemir, Raif(28)
- Arslan, Mehmet(27)
- Karsli, Orhan(27)
- Kulakaç, Nurşen(26)
- Baltacı, Cemalettin(25)
- Gücer, Mehmet Ali(25)
- Kurt, Kemal(25)
- Maden, Nafiz(25)
- Ozturk, Samet(25)
- Topal, Fevzi(25)
- Baltaci, Cemalettin(24)
- Yücel, Cem(24)
- Aliyazicioglu, Yuksel(23)
- Bayrakdaroglu, Serdar(23)
- Kankal, Murat(23)
- Peker, Iskender(23)
- Yolcu, Halil(23)
- Reis, Hatice Catal(21)
- Topal, Meryem(21)
- Vural, Alaaddin(21)
- Aydin, Aydanur(20)
- Aydin, Faruk(20)
- Bayraktar, Alemdar(20)
- Kurnaz, Muammer(20)
- Çelik, Necati(20)
- Ürkek, Bayram(20)
- Cakir, Tufan(18)
- Günen, Mehmet Akif(18)
Yayınlar
- MakaleYayıncıda açık erişim2019Scopus SJRQ1An experimental study on the compressive response of CFRP honeycombs with various cell configurations
Pehlivan, Levent; Baykasoğlu, Cengiz
The experimental investigation on the compressive response of carbon fiber reinforced polymer (CFRP) honeycombs with various cell configurations was carried out in the present work. The CFRP honeycomb specimens were manufactured by corrugation technique, in which the prepreg CFRP sheets were first corrugated into the certain shape using corrugated aluminum moulds under heat and pressure, and then the corrugated CFRP sheets were glued and stacked to construct honeycomb specimens. Twenty-seven groups of specimens were experimentally tested to examine the effects of cell geometry (i.e., square, circular, and hexagonal), cell wall thickness and height on the quasi-static out-of-plane crushing performance of the honeycombs. The square, circular, and hexagonal honeycomb specimen groups were designed to have almost the same weights. The results showed that the cell wall thickness is an significant parameters on the overal crushing response of the CFRP honeycombs while the out-of-plane compressive strenght of the honeycombs is generally independent of the height. It is observed that the hexagonal specimen groups have generally superior crushing performance in comparison with the square and circular counterparts due to their large double foil bonding surfaces. The experimental results also revealed that the crushing properties of the honeycomb structures with the core densities of 157–282 kg/m 3 could be increased more than two times with the appropriate selection of cell configurations.
AtıfScopus134WoS110OpenAlex122
İncele - MakaleYalnız künye2019Scopus SJRQ1Adakite-like parental melt generation by partial fusion of juvenile lower crust, Sakarya Zone, NE Turkey: A far-field response to break-off of the southern Neotethyan oceanic lithosphere
Karsli, Orhan; Dokuz, Abdurrahman; Kandemir, Raif; Aydin, Faruk; Schmitt, Axel K.; Ersoy, E. Yalçın; Alyıldız, Cihangir
The timing of major tectonic events and the driving mechanisms for magma generation during Late Cenozoic convergence and collision between Arabia and Eurasia still remain unknown. The Sakarya Zone (SZ) in northern Turkey is a critical member of this collisional assemblage. In the easternmost part of the SZ, we have recognized a Late Miocene volcanic suite termed the Çağirankaya volcanics which displays characteristic post-collisional geochemical features. Here, we report a new data set of zircon U–Pb ages, whole-rock major and trace element, as well as Sr–Nd isotope analyses for dacite and andesite samples from the Çağirankaya volcanics. Zircon U–Pb ages for a selected dacitic sample average 5.16 ± 0.11 Ma (mean square of weighted deviates, MSWD = 0.45, n = 35), confirming a late Miocene age of this volcanic episode. The high-K calc-alkaline andesites and dacites exhibit an adakite-like geochemical signature, and are characterized by high Sr (424 to 552 ppm), Sr/Y ratios (31–43), and low Mg# (42 to 46) values, along with low Y (12–14 ppm) and heavy rare earth element (HREE) concentrations, that resemble those in adakites formed by partial melting of hot oceanic slab during subduction. Isotopic compositions are near bulk Earth (87Sr/86Sr(t) = 0.70482 to 0.70489, εNd(t) = +1.08 to +1.33), which rules out a solely asthenospheric origin. Elevated Nb/Ta (14 to 17) and K2O/Na2O (0.6–1.0) imply a juvenile mafic lower crustal source composed of ~20% garnet-bearing amphibolite. Geochemical modeling suggests that adakite-like parental melts were generated in the absence of subduction and without large-scale delamination of lower continental crust. Instead, our findings suggest that Late Miocene adakite-like volcanic rocks in the SZ formed in a post-collisional intra-continental setting, which experienced far-field extension after the subducted slab of the southern Neotethyan branch became detached in the collision zone. Asthenospheric upwelling and underplating of basaltic magma provided the heat for partial melting of lower crustal amphibolite, forming minor amounts of adakite-like melts in the SZ.
AtıfScopus47WoS43OpenAlex51İncele - MakaleAçık Erişim2019Scopus SJRQ1Experimental and numerical studies on axially loaded reinforced square hollow section T-joints
Ozyurt, E.; Das, S.
This paper presents outcomes of experimental and numerical studies completed on unreinforced, collar plate reinforced and doubler plate reinforced Square Hollow Section (SHS)T-joints subjected to axial compressive loading on the brace member. A total of nine full-scale SHS T-joint specimens were fabricated and tested, in which six specimens were reinforced with collar plate and doubler plate. Non-linear finite element (FE)models were developed using finite element code, ABAQUS. Test data was used to validate these FE models. Subsequently, validated FE models were used to conduct an extensive parametric study to investigate the effect of various geometrical parameters of main members and reinforcement plates on the ultimate capacity of reinforced SHS T-joints. The parametric study found that use of both collar and doubler plate reinforcements significantly increase the ultimate capacity of SHS T-joints. Thickness of the reinforcing plate has a positive effect if the thickness of the reinforcing plate is limited to twice the thickness of the chord member. This study, however, found that the capacity of a reinforced SHS T-joint is not dependent on the type of reinforcing plate. The study concludes that the maximum capacity that can be achieved from a reinforced joint is about double the capacity of a similar unreinforced joint. It was found that the Eurocode EN 1993-1-8 overestimates the capacity of reinforced SHS T-joints. Therefore, a new design method for predicting the ultimate capacity of the collar plate and doubler plate reinforced SHS T-joints was developed and this new design method is presented in this paper.
AtıfScopus30WoS27OpenAlex27İncele - MakaleYalnız künye2019Scopus SJRQ1Geochronology, geochemistry, and petrology of adakitic Pliocene–Quaternary volcanism in the Şebinkarahisar (Giresun) area, NE Turkey
Yücel, Cem
The Pliocene–Quaternary volcanics in NE Turkey are mainly hornblende–phyric trachyandesites having a narrow range of SiO 2 from 61.88 to 63.00 wt.% and exhibiting adakitic signatures with their Na 2 O (3.67–4.27 wt.%), Al 2 O 3 (16.19–16.80 wt.%), Y (14.1–16.5 ppm) contents and K 2 O/Na 2 O (0.87–1.12), Sr/Y (44.24–54.90), and La/Yb (36.80–43.88) ratios. Plagioclases as the main mineral phases show a wide range of compositions, and weak normal and reverse zoning. Hornblendes are generally edenite and pargasite (Mg#: 0.39–0.74). Clinopyroxenes are augite (Mg#: 0.58–0.76). Biotites have Mg# ranging from 0.45 to 0.66. The textural and compositional variations indicate disequilibrium crystallization possibly arising from magma mixing. The U–Pb zircon dating of the adakitic volcanics yielded 3.4–1.9 Ma. The studied rocks display moderate light rare earth element /heavy rare earth element ratios and enrichment in the lithophile element and depletion in high field strength element, implying that the parental magmas were derived from mantle sources previously enriched by slab-derived fluids and/or subducted sediments. The crystallization temperature and pressure estimations based on the clinopyroxene thermobarometry range from 1144 to 1186°C and from 3.92 to 7.97 kbar, respectively. Hornblende thermobarometry, oxygen fugacity, and hygrometer calculations yielded results as 908–993°C at a pressure of 2.87–5.22 kbar, water content of 4.4–8.4 wt.%, and relative oxygen fugacity (ΔNNO log units) of −0.6 to 0.9, respectively. Biotite thermobarometry suggests relatively higher oxygen fugacity conditions (10 –13.33 to 10 –17.60 ) at temperatures of 676–819°C and at pressures from 1.15 to 1.76 kbar. In the light of the obtained data and modelling, it can be concluded that the magmas of the adakitic volcanics were derived from enriched mantle source through relatively higher partial melting and experienced magma mixing with melts at the crustal level. Additionally, the fractional crystallization and assimilation-fractional crystallization processes may have played an important role during the evolution of the studied volcanics.
AtıfScopus28WoS27OpenAlex27İncele - MakaleYalnız künye2019Scopus SJRQ2Production and Characterization of Bacterial Cellulose from Citrus Peels
Güzel, Melih; Akpınar, Özlem
Cellulose is the most common polymer in the world, formed by β-1,4 linked glucopyranose units. In this study, citrus peels (lemon, mandarin, orange and grapefruit) were used for the production of bacterial cellulose (BC). The peels were hydrolyzed with dilute acid and hydrolysates were used for BC production. The production of BC was carried out at 28–32 °C for 21 days under static conditions with Komagataeibacter hansenii GA2016. BC yields were found to be between 2.06 and 3.92%. It was found that the FTIR spectra of the BCs produced in citrus peel hydrolysates were similar to BC produced in the commercially available nutrients. The result of this study showed that all the BCs produced from citrus peels were characterized to have high water holding capacity, thin fiber diameter, high the thermal stability and high crystallinity.
AtıfScopus118WoS102OpenAlex123İncele - MakaleYalnız künye2019Scopus SJRQ1The effectiveness of the monetary transmission mechanism channel in Turkey
Okur, Fatih; Akkuş, Ömer; Durmaz, Atakan
This study investigates on which channels the monetary transmission mechanism works effectively. In this context, quarterly data for the period 2005-2017 is used for Turkey and the variables used to determine the efficiency of the monetary transmission mechanism are analyzed by the VAR method. The obtained results indicate that the loans and reserves have a more effective role on the inflation as a channel of the monetary transmission mechanism. According to the long run results, while the exchange rate and reserves channel have a negative effect on the real GDP, it is revealed that loans have a positive effect on the real GDP in the long run stabilization.
AtıfScopus3WoS3İncele - MakaleAçık Erişim2019Scopus SJRQ2Anticholinergic and antidiabetic effects of isoeugenol from clove (Eugenia caryophylata) oil
Topal, Fevzi
Isoeugenol (2-methoxy-4-(prop-1-en-1-yl)phenol), a component of from clove (Eugenia caryophylata) oil, is a starting material for both the biotechnological and synthetic production of vanillin and vanillic acid. In this article, the isoeugenol showed excellent inhibitory effects against some metabolic enzymes such as acetylcholinesterase (AChE) enzymes, α-glycosidase, and α-amylase. Isoeugenol has the IC50 values of 411.5 for α-amylase, 19.25 nM for α-glycosidase and 77.00 nM for AChE. Ki values of isoeugenol were found as 21 ± 9 nM and 16 ± 3 nM against α-glycosidase and AChE, respectively. On the other hand, tacrine as standard AChE inhibitor exhibited IC50 value of 20.38 nM. α-Glycosidase inhibitors, commonly referred to as starch blockers, are anti-diabetic drugs that help reduce edible blood glucose levels. AChE inhibitors are used for the treatment of some neurologic degenerational diseases, which involve Alzheimer’s disease. Also, there is a growing interest and the need to search for newer effective and safe AChE, α-amylase, and α-glycosidase inhibitors for the treatment of some metabolic disorder.
AtıfScopus51WoS40OpenAlex48İncele - MakaleAçık Erişim2019Scopus SJRQ3Search for excited muons at the future SpPC-based muon-proton colliders
Caliskan, A.
We have investigated the production potential of the spin-1/2 excited muons, predicted by preonic models, at the four SPPC (Super Proton-Proton Collider)-based muon-proton colliders in different center-of-mass energies. For the signal process µp → µ*X → µγX, the production cross section and the decay width values of the excited muons have been calculated. The pseudorapidity and transverse momentum distributions of muons and photons in the final state have been obtained in order to choose the kinematical cuts best suited for enhancing the statistical signal of the excited muon signature. By applying these cuts, we report the discovery, observation and exclusion mass limits of the excited muons for two compositeness scale values, which are an energy level at which new interactions are expected to occur. It is shown that the discovery limits on the excited muons in the case the compositeness scale equals 100 TeV are 2.7, 3.9, 3.1 and 6.7 TeV for center-of-mass energies of 10.3, 14.2, 14.6 and 20.2 TeV, respectively.
AtıfScopus3WoS3OpenAlex6İncele - MakaleYalnız künye2019Scopus SJRQ1Circuit implementation of nano-scale TiO2 memristor using only metal-oxide-semiconductor transistors
Gul, Fatih
A metal-oxide-semiconductor (MOS)-based circuit model that emulates a TiO2 memristor is proposed in this study. First, a TiO2 (10-nm active layer thickness)-based memristor device was fabricated. The structural properties of the device were confirmed via energy dispersive X-ray spectroscopy. The memristive characteristics of the device were resolved by applying a time-dependent voltage. The typical pinched hysteresis memristive loops of the current-voltage curves were obtained. After physical implementation and characterization of the device, a circuit model was implemented using only four MOS transistors to emulate the fabricated TiO2 memristor. In addition to emulating the fabricated memristor, the proposed circuit model is suitable for use in general memristor-based applications. No active element or circuit blocks were used in the circuit to achieve memristive characteristics. The simulation and experimental results are in good agreement; moreover, the circuit is very simple compared to those presented in previous studies in the literature and it was able to emulate the fabricated memristor. All simulations were completed using 180 nm TSMC CMOS process parameters.
AtıfScopus38WoS35OpenAlex40İncele - Derleme MakaleYalnız künye2019Scopus SJRQ4Redescription and New Record of the Harvestman Lacinius insularis Roewer, 1923 (Opiliones: Phalangiidae) from Turkey
Kurt, Kemal; Yaǧmur, Ersen Aydin
Lacinius insularis Roewer, 1923, is recorded for the first time as part of the Turkish harvestmen fauna. Prior to this, the species was only known from the island of Crete in Greece. The new collections were made on Nif mountain in İzmir Province (far western Turkey). In this study, L. insularis is redescribed based on adults from Turkey. Its detailed description, morphological characteristics, distribution and measurements are given. Also, genitalia, body dorsal view, chelicerae, and pedipalp are illustrated. In addition, this species is compared with similar species.
AtıfScopus1WoS1OpenAlex2İncele - MakaleYalnız künye2019Scopus SJRQ2Effects of wood preservatives on the combustion process and combustion quality of wood
Sadiye Yasar, S.
This study examines the combustion properties of Scots pine (Pinus sylvestris L.) and Oriental beech (Fagus orientalis L.) in 3 stages (CWF, SC and EC) according to ASTM E 160-50 (1975). Wood samples were impregnated with Tanalith-E (T) and Wolmanit-CB (WC) and then were varnished with Synthetic (St) and water based (wb) varnishes. When the combustion was completed, the weight loss, combustion temperatures, illuminance values, total time of combustion, and demolition time were measured. As the result, illuminance value of Oriental beech wood decreased, while the smoke density increased. Scots pine was later destroyed in the combustion process. Areas with a risk of fire are advised to use pine wood instead of beech. Wolmanit-CB and synthetic varnish reduced the temperature and illuminance values. Oriental beech, Tanalith-E, and synthetic varnish resulted in the highest temperatures for all combustion stages. This triple interaction increased total combustion time values by more than 90% when compared with the control samples.
AtıfScopus4WoS5İncele - MakaleAçık Erişim2019Scopus SJRQ2New desmid records from high mountain lakes in Artabel Lakes Nature Park, Gümüşhane, Turkey
Şahin, Bülent; Akar, Bülent
The algal flora of 17 lakes and 1 pond in the Artabel Lakes Nature Park were investigated during two summer seasons (2013 and 2016). In total, 26 desmid taxa were found and identified as new records for the desmid flora of Turkey based on their morphotaxonomic characteristics and ecological preferences. The taxa identified belong to the genera Actinotaenium (1), Closterium (1), Cosmarium (15), Micrasterias (1), Spondylosium (1), Staurastrum (5), Teilingia (1), and Tetmemorus (1). Morphotaxonomy, ecology, and distribution of each species were discussed in detail.
AtıfScopus7WoS5OpenAlex8TR Dizin7
İncele - MakaleYalnız künye2019Scopus SJRQ1A new use of the ant system algorithm for the max-mean dispersion problem
Cura, Tunchan; Özdemir, Muhlis
This study addresses an NP-hard problem known as the max-mean dispersion problem (MaxMeanDP), which belongs to a well-known class of diversity problems. In view of the increasing importance of parallel computing, this study proposes an ant system (AS) approach to the MaxMeanDP in which ants execute the search process in parallel. Moreover, by proposing a rather different use of the pheromone trail and visibility compared to the original AS, a new AS algorithm is introduced that runs in parallel. Our analysis indicates that the new use of the pheromone trail and visibility significantly contributes to the quality of the solution. The results show that the proposed method is effective, efficient and comparable to other approaches.
AtıfScopus5WoS3OpenAlex3İncele - MakaleAçık Erişim2019Scopus SJRQ2Formal Assessment and Measurement of Data Utilization and Value for Mines
Rogers, W. Pratt; Kahraman, M. Mustafa; Dessureault, Sean
Most contemporary mines have considerable amounts of data. Structured and unstructured large data sets are colloquially named big data. Much of the data in mining operations come from a variety of systems, each with different databases and reporting environments. Standard technology deployments create a “silo-ification” of data leading to poor system benefit. Through modern server monitoring and systematic approach, data utilization and value can quantifiably be measured. The Data Utilization and Value Index (DUVI) can quantify business intelligence best practices and user interaction. This study seeks to provide a data management tool to measure data utilization across the process of converting data into action.
AtıfScopus3WoS3OpenAlex6İncele - MakaleAçık Erişim2019Scopus SJRQ2Addressing the sneak-path problem in crossbar RRAM devices using memristor-based one Schottky diode-one resistor array
Gül, Fatih
Resistive random access memories (RRAMs) are favorable contenders in the race towards future technologies. Moreover, the desirable properties of memristor-based RRAM devices make them very good competitors in this field. The sneak paths problem poses one of the main difficulties in the construction of crossbar memory devices. This problem can be effectively suppressed by applying the 1diode-1resistor (1D1R) design structure. The Schottky diode has many advantages compared to the PN junction diode. The low-power (∼1 µW) ZnO active-layered thin-film (60 nm thick) one Schottky diode-one memristor device fabricated in this study included a top Ag electrode and a bottom Al electrode. The material makeup of the device was confirmed via energy dispersive X-ray spectroscopy (EDAX). The memristive and Schottky diode characteristics of the Ag/ZnO/Al device were resolved by measuring the time-dependent voltage/current. The characteristic pinched hysteresis memristive loops were observed at the first quadrant of the current-voltage plane, whereas the diode curves were seen at the third quadrant. Using the current-voltage curves, the height of the Schottky barrier, ideality factor and threshold voltage of the Schottky diode were found to be 0.68 eV, 3.75 and 0.49 V, respectively. After physical implementation and characterization of the one diode-one memristor device, its anti-crosstalk characteristics were investigated. Taking into account the 10% read margin, the maximum crossbar size was found to be 87.
AtıfScopus121WoS115OpenAlex127İncele - MakaleYalnız künye2019Scopus SJRQ2Natural convection in an enclosure with a pair of discrete heat sources
Saglam, Mehmet; Sarper, Bugra; Aydin, Orhan
An experimental and numerical study is carried out to investigate natural convection cooling characteristics of discrete heat sources in a rectangular enclosure. One of the sidewalls of the enclosure is heated by a pair of identical discrete heat sources, whereas the other sidewall is maintained at a constant temperature. The effect of the heat dissipation ratio of the heat sources on buoyancy-induced flow and heat transfer characteristics is investigated. Experimental studies are performed for a constant value of the modified Rayleigh number (Ra = 7.7 × 105) and three different values of the heat dissipation ratio (rh = q1 = q2 = 0.5, 1 and 2), whereas numerical studies cover the range of 104to 5 × 106 for the modified Rayleigh number and different values of the heat dissipation ratios between 0.25 and 2. In the experimental study, qualitative flow visualization studies are carried out as well as temperature measurements. In the numerical study, a commercial computational fluid dynamics code in ANSYS Fluent is used. The variations of the surface temperatures, the hot spot temperature, and the mean Nusselt number with the modified Rayleigh number and the heat dissipation ratio are obtained. Results are presented in terms of streamlines, isotherms, and heat lines.
AtıfScopus19WoS16OpenAlex26İncele - MakaleYalnız künye2019Scopus SJRQ4On some properties of hyper-bessel and related functions
Aktaş, I.
In this study, by using the Hadamard product representation of the hyper- Bessel function and basic concepts in mathematics we investigate the sign of the hyper- Bessel function x → J αd (x) on some sets. Also, we show that the function x → J αd (x) is a decreasing function on [0, J αd ,1), and the function is an increasing function on (0,∞), where j αd ,1 and II αd denote the first positive zero of the function J αd (x) and modified hyper-Bessel function, respectively. In addition, we prove the strictly log-concavity of the functions J αd (x) and J αd (x) on some sets. Moreover, we give some illustrative examples regarding our main results.
AtıfScopus4WoS5TR Dizin2İncele - MakaleYalnız künye2019Scopus SJRQ3Radioactivity measurements in spas of central and Eastern Black Sea region, Turkey
Duran, S.U.; Küçükömeroğlu, B.; Çevik, U.; Çelik, N.; Taskin, H.; Ersoy, H.
Background: The aim of this study is to measure the level of radon gas in the thermal springs of the four seasons in the Black Sea Region and to determine the gamma activity levels in the soils around them. Materials and Methods: Indoor radon activity concentrations of four spa facilities, namely Ladik, Havza, Ilıcaköy, and Ayder, were measured using CR-39 passive radon dosimeters and active radon monitoring AlphaGUARD for all four seasons. Radon activity concentrations in the soil in the vicinity of these spa facilities were measured using AlphaGUARD. Radionuclides in the soil samples collected from the spa regions were also determined using gamma-ray spectroscopy. Results: The highest radon value in the air environment in the spa facility was measured in swimming pools. Indoor radon levels in the spa's swimming pool vary within a wide range, (30-2118) Bq·m−3. The average radon gas levels in the soil around the Ayder, Havza, Ladik and Ilıcaköy hot springs were measured as 38±1 kBqm-3, 9±1 kBq m-3, 50±3 kBqm-3, 955±5 kBqm-3, respectively. Conclusion: The annual effective doses due to indoor radon sources changed from 0.6 mSv to 13.4 mSv for workers, and from 1 x10 -4 mSv to 3x10-1 mSv for patients. The annual effective dose equivalents from the soils around the spa were calculated to be between 82-558 µSv y-1. The results were compared with those of other measurements performed in different parts of the world.
AtıfScopus3WoS3İncele - MakaleAçık Erişim2019Scopus SJRQ3Investigation of certain nutritional properties of noodle enriched with raw flaxseed
Yuksel, F.
In this study, traditional homemade noodles were enriched with raw flaxseed and some nutritional properties such as resistant starch (RS), total starch, total dietary fibre (TDF), estimated glycaemic index (eGI) and major mineral composition of final products were investigated. Flaxseed was supplemented into the noodle mixture at three different concentrations (10, 15 and 20 g/100 g). RS content of the samples was in the range of 0.61-2.14 g/100 g and the highest RS was found for the sample having 10% flaxseed. Maximum TDF value was determined to be 8.28% for the noodle sample enriched with 20% of flaxseed while that of control was 1.68%. Estimated eGI of the samples was not significantly affected by the flaxseed fortification while mineral composition of noodle samples was significantly affected by the flaxseed addition (P < 0.05). The major mineral compounds present in the samples were sodium, potassium, magnesium and phosphorus. It could be concluded that the noodle enriched with 10% of flaxseed would be a healthier alternative product for consumption.
AtıfScopus10WoS9OpenAlex11İncele - MakaleAçık Erişim2019Scopus SJRQ3Optimum tuning of a gyroscopic vibration absorber for vibration control of a vertical cantilever beam with tip mass
Ünker, F.; Çuvalcı, O.
In this paper, a symmetric gyro with coupling to the tip mass of a beam mounted on a vibrating base is considered. Taking advantage of the angular momentum of the rotating gyroscope, gyrostabilizer systems are expected to become more widely actualized as they provide an effective means of motion control with several significant advantages for various structures. This paper mainly focused on finding optimized stiffness and damping values that minimize the vibration responses with the derivation of the frequency equations of a special combined gyro-beam system. Correctness of the analytical results is verified by numerical simulations. The comparison with the results from the derivation of the corresponding frequency equations shows that the optimized stiffness and damping values are very accurate.
AtıfScopus8WoS5OpenAlex7İncele