Sürdürülebilir Kalkınma Amaçları

Yazarlar

  • MakaleAçık Erişim2027
    Authorisation of notary publics on real property transactions in relation to the Turkish land registry system based on Cadastre 2014 vision

    Çoruhlu, Yakup Emre; Inan, Halil Ibrahim; Çelik, Mehmet Ozgur; Alemdar, Alkan; Yildiz, Okan; Azadi, Hossein

    The International Federation of Surveyors (FIG) has globally influenced land administration through its Cadastre 2014 vision and subsequent LADM standards. T & uuml;rkiye has been modernizing its land registry and cadastre system accordingly. The General Directorate of Land Registry and Cadastre (GDLRC) manages approximately 17 million annual transactions, including about 3.4 million conveyancing (long-term averages). To reduce congestion in Land Registry Offices (LROs), notaries were authorized to issue sales contracts in June 2022. This study investigates the effects of this change within the Cadastre 2014/2034 framework in terms of the maturity of the Turkish Land Administration System (LAS) and also by linking the issue to broader debates within land management and governance. A survey of 140 GDLRC experts revealed that notary involvement currently offers limited time and financial benefits to citizens and does not significantly reduce LRO workload. The central factor for this limitation is evaluated to be the maturity of Turkish LAS. On the other hand, the initiative aligns with Cadastre 2014's fifth statement, which advocates public-private collaboration, and therefore it should be further evolved. Within this evolution, administrative/managerial fixes and training programmes for notaries in the short term, management of all internal and external RRRs via LAS as a spatial data infrastructure service in line with LADM standards in the medium term, and betterment of institutional coordination, public responsibility development and capacity building in the long term are proposed for a better eventual land administration and management towards local and national good land governance.

    • SDG 16 · Barış, Adalet ve Güçlü Kurumlar
  • MakaleAçık Erişim2026
    Long-term decline of Chernobyl-derived 137Cs in mosses and lichens from the Eastern Black Sea region of Türkiye

    Çevik, Ugur; Çelik, Necati; Uzun, Kubra K.; Çelik, Ahmet; Koz, Bahadir; Özen, Songul A.; Yesilkanat, Cafer M.; Hacisalihoglu, Aylin; Özkalayci, Fatih; Kaya, Selim

    This study presents the third consecutive assessment of 13 Cs activity concentrations in the same 50 moss (7 species) and lichen (2 species) sampling points in Ordu province, T & uuml;rkiye, one of the most heavily contaminated areas following the Chernobyl accident. Samples were collected from exactly the same locations used in the 1997 and 2007 studies and analyzed by high-resolution gamma spectrometry. In 2025, detectable 13 Cs was found in 14 of 30 moss sites (47%) and 3 of 20 lichen sites (15%). For samples below the minimum detectable activity (MDA), a value of MDA/2 (0.93 Bq kg-1) was substituted for lichens, while moss samples below the MDA were excluded from regression. The ecological half-life (Teco) for the 2007-2025 period was 4.38 +/- 1.05 years for mosses and 4.18 +/- 0.61 years for lichens. For mosses, this is nearly identical to the 1997-2007 mean (4.4 years), while for lichens it decreased from 5.6 to 4.18 years, suggesting a slight acceleration in environmental removal. All Teco values remain far shorter than the physical half-life of 13 Cs (30 years), confirming that environmental removal processes dominate over radioactive decay. Residual 13 Cs is concentrated in higher-altitude areas, reflecting the original deposition pattern and slower removal in cooler, more humid microenvironments. Nearly 39 years after the accident, the radiological risk posed by residual trace levels is negligible. This 28-year dataset provides one of the longest continuous records of 13 Cs in epiphytic bioindicators and serves as a valuable baseline for future contamination events.

    • SDG 15 · Karasal Yaşam
  • MakaleAçık Erişim2026
    Designing an industrial-scale radio frequency decontamination process for peanut butter

    Coskun, Eda; Ozturk, Samet; Tasci, Caner; Kahraman, Kubra; Liu, Shuxiang; Li, Rui; Wang, Shaojin; Mert, Behic; Marra, Francesco; Erdogdu, Ferruh

    Centers for Disease Control and Prevention (CDC) has reported outbreaks of Salmonella, particularly associated with low-moisture foods including peanut butter. Even though roasting is included along the processing line, the presence of these safety issues indicates the requirement of process following the packaging of the samples. Because of the lower thermal diffusivity of the peanut butter, a conventional thermal process is expected to be challenging with expected temperature non-uniformities. Therefore, radio frequency (RF) heating was considered in this study for thermal processing of peanut butter samples. For this purpose, a computational model was developed to determine the temperature change of peanut butter samples. Experimental studies for model validation were completed in a 10 kW - 27.12 MHz RF system at 3300 and 4000 V electrode potentials. Following the model validation, a comparison to the conventional thermal processing was presented, and industrial scale thermal processing studies were applied where up to 30 packaged samples were placed within the RF cavity. Process efficiency was determined with the process time decrease, temperature uniformity and decontamination effects. Science4Impact: This study demonstrated RF processing for an efficient thermal decontamination with uniform temperature distribution attained within the samples in an industrial scale process.

    • SDG 2 · Açlığa Son
  • Derleme MakaleAçık Erişim2025
    Purely endoscopic endonasal resection of extracranial trigeminal schwannomas: a descriptive systematic review and institutional case series

    Yilmaz, Eren; Emengen, Atakan; Uzuner, Ayse; Ozsoy, Bedrettin; Gokbel, Aykut; Anik, Ihsan; Ceylan, Savas

    Background: Trigeminal schwannomas (TSs) are uncommon, benign tumors that arise from the trigeminal nerve. They can spread to the middle cranial fossa, posterior fossa, and extracranially (pterygopalatine fossa (PPF), infratemporal fossa, orbita). Among these, extracranial involvement is the least frequent. Before the advent of endoscopic techniques, these tumors were primarily removed using conventional microsurgical approaches. Due to both the rarity of extracranial localization and the increasing use of endoscopic techniques in suitable cases, reports of TSs with extracranial involvement treated via a purely endoscopic endonasal approach (EEA) remain limited, typically appearing as case reports or a small subset within larger case series. This study systematically reviews the literature on extracranial TSs managed exclusively with EEA and presents two illustrative cases from our institution. Methods: A systematic search of the PubMed database was performed in accordance with PRISMA guidelines to identify studies that utilized a purely EEA for extracranial TS cases. Additionally, a retrospective review of 6118 EEA procedures conducted at our institution identified two patients with histopathologically confirmed extracranial TSs. Clinical presentation, surgical approach, outcomes, and complications were analyzed. Results: A total of 147 records were identified through database searches and reference lists. After removing duplicate records, 144 full-text articles were assessed for eligibility. Of these, 124 studies were excluded with justification, resulting in 23 studies being included in the review. When combined with our institutional cases, data from a total of 52 patients were analyzed. Facial numbness was the most common presenting symptom (70.5 %). The mean tumor diameter was 38.6 +/- 13.3 mm, and the gross total resection rate was 93.1 %. In our cases, both patients successfully underwent tumor resection via EEA without postoperative neurological deficits. Conclusions: EEA provides a direct, minimally invasive route for managing extracranial TSs while reducing the morbidity associated with transcranial approaches. Although optimal for purely extracranial tumors, lesions extending into the middle or posterior fossa may require a combined approach. Therefore, individualized surgical planning is essential for achieving optimal outcomes in TS management.

    • SDG 3 · Sağlık ve Kaliteli Yaşam
  • EditoryalYalnız künye2025
    Choroidal melanoma missed on brain MRI: Small lesion, big consequences

    Tonkaz, Gokhan; Akdeniz, Cemre; Tonkaz, Mehmet; Tonkaz, Duygu Erkal

    • SDG 3 · Sağlık ve Kaliteli Yaşam
  • EditoryalYalnız künye2024
    A rare lesion of the clivus: Neuroenteric cyst

    Tonkaz, Gokhankhan; Kaya, Abdulkadir; Tonkaz, Mehmet; Tonkaz, Duygu Erkal

    • SDG 3 · Sağlık ve Kaliteli Yaşam
  • MakaleAçık Erişim2024
    Supply chain resilience in the tourism and hospitality industry: A comprehensive examination of driving and restraining forces

    Erol, Ismail; Oztel, Ahmet; Dogru, Tarik; Peker, Iskender; Neuhofer, Irem Onder; Benli, Tolga

    Supply chain disruptions and a lack of resilient supply chains have adverse impact on the global economy. Particularly, complex nature of the tourism and hospitality industry makes it even more susceptible to failure when supply chain resiliency is rather low or does not exist. However, despite its significance, a comprehensive and systematic examination of building resilience in tourism and hospitality supply chains (THSCs) is lacking in the extant literature. The purpose of this study is to develop a comprehensive framework that outlines the driving and restraining forces for building resilient THSCs. The decision framework proposed in this study integrates rough interval valued neutrosophic (RIVN) force field theory of change with RIVN-ISM-MICMAC methodology. The results showed that the restraining forces, such as lack of effective regulations and incentives and effective organizational and supply chain policies are the primary factors that constrain improving resilience in THSCs. Theoretical and practical implications are discussed.

    • SDG 8 · İnsana Yakışır İş ve Ekonomik Büyüme
    • SDG 9 · Sanayi, Yenilikçilik ve Altyapı
  • MakaleAçık Erişim2021
    Antidiabetic, anticholinergic and antioxidant activities of aerial parts of shaggy bindweed (Convulvulus betonicifolia Miller subsp.) - profiling of phenolic compounds by LC-HRMS

    Bingol, Zeynebe; Kiziltas, Hatice; Gören, Ahmet C.; Kose, Leyla Polat; Topal, Meryem; Durmaz, Lokman; Alwasel, Saleh H.; Gulcin, Ilhami

    In order to evaluate the antioxidant activity of evaporated ethanolic extract (EESB) and lyophilized water extract (WESB) of Shaggy bindweed (Convulvulus betonicifolia Mill. Subs), some putative antioxidant methods such as DPPH. scavenging activity, ABTS(center dot)(-) scavenging effect, ferric ions (Fe3+) reduction method, cupric ions (Cu2+) reducing capacity, and ferrous ions (Fe2+) binding activities were separately performed. Also, ascorbic acid, alpha-tocopherol and BHT were used as the standard compounds. Additionally, some phenolic compounds that responsible for antioxidant abilities of EESB and WESB were screened by liquid chromatography-high resolution mass spectrometry (LC-HRMS). At the same concentration, EESB and WESB demonstrated effective antioxidant abilities when compared to standards. In addition, EESB demonstrated IC50 values of 1.946 mu g/mL against acetylcholinesterase (AChE), 0.815 mu g/mL against alpha-glycosidase and 0.675 mu g/mL against alpha-amylase enzymes.

  • MakaleYalnız künye2019
    Caffeic acid grafted chitosan as a novel dual-functional stabilizer for food-grade emulsions and additive antioxidant property

    Ilyasoglu, Huri; Nadzieja, Marcin; Guo, Zheng

    The aim of this study was to develop a novel dual-functional stabilizer for food-grade Pickering emulsions by grafting caffeic acid onto chitosan via a free radical mediated method. The grafting of caffeic acid onto chitosan was confirmed by UV-vis absorption spectra, FTIR spectra and H-1 NMR spectra and DSC thermogram. The antioxidant properties of the caffeic acid grafted chitosan (CA-g-Ch) were measured by three in vitro assays. Caffeic acid-grafted chitosan displayed much better Fe2+ chelating property than both chitosan and caffeic acid, and retained comparable DPPH radical scavenging activity as caffeic acid. Moreover, the formation of the CA-g-Ch based emulsion was monitored by the turbidity, zeta potential, and particle size measurements. The CA-g-Ch polymers were found to be pH-responsive. The oil (linoleic acid) in water emulsions with the CA-g-Ch (as emulsifier/Pickering stabilizer) was prepared to examine its potential to stabilize Pickering emulsions, as well as its additive antioxidant properties. The results (zeta potential, mean droplet size, creaming index and TBARS values etc) demonstrated that the CA-g-Ch could act as a dual-functional stabilizer for Pickering emulsions. The emulsions made with the CA-g-Ch were found to be stable at a broad pH range of 3-6. Our findings proved that CA-g-Ch as novel dual-functional polymeric surfactant, may have great potential to find applications in food and pharmaceutical industries.

  • MakaleYalnız künye2019
    A novel niosome formulation for encapsulation of anthocyanins and modelling intestinal transport

    Fidan-Yardimci, Melike; Akay, Seref; Sharifi, Fatemeh; Sevimli-Gur, Canan; Ongen, Gaye; Yesil-Celiktas, Ozlem

    The bioavailability of drugs can be improved by regulating the structural properties, particularly lipoid systems, such as niosomes, can increase cellular uptake. Herein, we optimized double emulsion and niosomal formulations for encapsulating anthocyanin-rich black carrot extract. Nanoparticles obtained by selected formulation were characterized in terms of morphology, particle size, drug encapsulation efficiency, in vitro release and cytotoxicity. The optimum conditions for niosomal formulation were elicited as 30 mg of cholesterol, 150 mg of Tween 20 and feeding time of 1 min at a stirring rate of 900 rpm yielding the lowest average particle size of 130 nm. In vitro release data showed the majority of the encapsulated anthocyanins were released at the end of 10 h. A mathematical model was developed to estimate the absorption of anthocyanins released from niosomes and cytotoxicity was assessed against neuroblastoma. Overall, these findings suggest that niosomal vesicles might be suitable delivery systems for anthocyanins.

    • SDG 3 · Sağlık ve Kaliteli Yaşam
  • MakaleAçık Erişim2018
    Are extramedian symptoms associated with peripheral causes in patient with carpal tunnel syndrome? Electrodiagnostic and ultrasonographic study

    Mansiz-Kaplan, Basak; Akdeniz-Leblecicier, Merve; Yagci, Ilker

    Objective: To evaluate the relationship between extramedian spreading of sensorial symptoms and median and ulnar nerve cross-sectional area (CSA) and to compare the ultrasonographic and electrophysiological findings in patients with carpal tunnel syndrome (CTS) with or without extramedian sensory symptoms. Design: Cross-sectional study. Materials and methods: Patients with CTS were divided into two groups as with or without extramedian symptoms and were assessed clinically, electrophysiologically and ultrasonographically by three blind investigators. In electrophysiological tests, median and ulnar nerve conduction studies were performed. Nerve cross-sectional areas were measured at hook of hamate, psiform bone, radio-ulnar joint, one-third distal part of forearm, and medial epicondyle by ultrasonography. Findings: The study was completed with 61 patients (108 hands). Extramedian symptoms were present in 31 patients (54 hands). Finger grip strength was lower, pain values evaluated with visual analogue scale were higher in patients with extramedian symptoms (p < 0.05). There was no statistically significant difference in electrophysiological and ultrasonographic parameters. Conclusion: According to our results, extramedian symptoms are not related to nerve conduction studies or nerve ultrasonography, these symptoms may be explained with central sensitization in patient with CTS. (C) 2017 Elsevier Ltd. All rights reserved.

    • SDG 3 · Sağlık ve Kaliteli Yaşam
  • MakaleAçık Erişim2015
    Antioxidant components of Viburnum opulus L. determined by on-line HPLC-UV-ABTS radical scavenging and LC-UV-ESI-MS methods

    Karaçelik, Ayca Aktas; Küçük, Murat; Iskefiyeli, Zeynep; Aydemir, Sezgin; De Smet, Seppe; Miserez, Bram; Sandra, Patrick

    Antioxidant activity of the juice and seed and skin extracts prepared with methanol, acetonitrile, and water of Viburnum opulus L. grown in Eastern Black Sea Region were studied with an on-line HPLC-ABTS method and off-line antioxidant methods, among which a linear positive correlation was observed. The fruit extracts were analysed with the HPLC-UV method optimised with 14 standard phenolics. Identification of the phenolic components in the juice was made using an HPLC-UV-ESI-MS method. Nineteen phenolic compounds in juice were identified by comparing the retention times and mass spectra with those of the standards and the phenolics reported in the literature. The major peaks in the juice belonged to coumaroyl-quinic acid, chlorogenic acid, procyanidin B2, and procyanidin trimer. Quite different antioxidant composition profiles were obtained from the extracts with the solvents of different polarities. The antioxidant activities of the seed extracts were higher than those of the skin extracts in general. (C) 2014 Elsevier Ltd. All rights reserved.

  • BildiriYalnız künye2014
    The effectiveness of the black mulberry molasses in prevention of radiotherapy-induced mucositis: a randomised controlled study in head and neck cancer patients

    Demir, M.; Can, G.; Meral, R.

    • SDG 3 · Sağlık ve Kaliteli Yaşam
  • MakaleYalnız künye2014
    The effects of macro synthetic fiber reinforcement use on physical and mechanical properties of concrete

    Bolat, Hakan; Şimşek, Osman; Çullu, Mustafa; Durmuş, Gökhan; Can, Ömer

    Attempts to find a construction material having increased strength, ductility, toughness, and durability have led to interest in high performance fiber reinforced concrete. The use of such materials increases day by day. When the fibers are distributed in a homogeneous way and used in appropriate quantity inside the concrete, they reduce cracks, contribute to tensile strength, toughness, ductility and durability, and improve other mechanical properties. In this study, four types of concrete were produced: steel fiber (SFRC), polyester fiber (PYFRC), polypropylene fiber (PPFRC) reinforced concrete and a reference sample made of plain concrete (R1); these were then compared to one another. The ratio of fibers was used 4.25% of volume of concrete. The effects of the different types of fiber on hardened concrete were determined by conducting physical and mechanical experiments. Compressive strength, surface hardness, ultrasonic pulse velocity, carbonation, abrasion, capillarity and freeze-thaw resistance experiments were conducted on hardened concretes. SFRC had higher 12.4%, PYFRC 3.4% higher and PPFRC 4.3% lower compressive strength with respect to R1. PPFRC showed 8.04% higher compressive strength than R1 when it was determined by the surface hardness method. SFRC showed 5.4% higher compressive strength than R1 when we applied the ultrasonic pulse velocity method. In the abrasion experiment, the highest abrasion was found in SFRC with ∼0.5%, while the lowest was found in PPFRC at ∼0.18%. The highest and lowest amount of capillary water absorption was seen in R1 and PYFRC, respectively. In a carbonation experiment, SFRC was determined ∼130.8% higher than R1. It was concluded that the types of fiber used for reinforcement influenced the physical and mechanical properties of the concrete.

  • MakaleYalnız künye2014
    Investigation of freeze-thaw effects on mechanical properties of fiber reinforced cement mortars

    Çavdar, Ahmet

    Fibers are used for improving some properties of conventional concrete (which is a brittle material) such as tensile strength, abrasion resistance, absorption and crack control. This study investigates the usability of fibers against the harmful effects of freeze-thaw cycles on cement mortars. For this objective, five different types of fibers, i.e., Polypropylene (PP), Carbon (CF), Aramid (AR), Glass (GF) and Poly vinyl alcohol (PVA) in four different ratios (0.0%, 0.4%, 0.8% and 1.2%) were added to cement mortars along with an amount of air agent. These samples were then subjected to five different freeze-thaw cycles (0, 25, 50, 75 and 100). Thus, mechanical behaviors were investigated under freeze-thaw effects. The most important results of the study are summarized; the fibers increase flexural strength and deflection ability of the samples while decreasing compressive strength, dynamic modulus of elasticity and specific mass. The highest flexural strength was obtained with a 1.2% addition of CF fiber for the samples in normal conditions. The mechanical properties of the samples subjected to repetitive freeze-thaw cycles were also investigated; the best flexural strength was provided with 1.2% CF addition, while the highest dynamic modulus of elasticity was obtained with a 1.2% PP addition.

  • MakaleYalnız künye2014
    The effects of chemical attacks on physical and mechanical properties of concrete produced under cold weather conditions

    Çullu, Mustafa; Arslan, Metin

    This study investigates the effects of corrosive conditions on the physical and mechanical properties of concrete produced in cold weather. 30% calcium nitrate and 5% hydroxyethylaminemixture (HEA) were used as additives in antifreeze. Within 15 min of placing the prepared concrete samples in molds, the samples were put in a deep freezer. They were exposed to frost at 0 C, -5 C, -10 C, -15 C and -20 C degrees in the deep freezer over two days. The samples were taken out of the freezer and removed from the forms one day later. They were cured in water at room temperature until the 28th day. The samples were then exposed to sulfuric acid of 5% concentration (H2SO4), magnesium sulfate of 7500 mg/L concentration (MgSO4), sodium sulfate of 5% concentration (NaCl), and corrosive cure and water-curing until the 120th day. At the end of the curing period, the permeable pore space volume, water absorption ratio, unit volume weight, capillarity ratio, impermeability, compressive strength, static modulus of elasticity, Poisson's ratio and tensile strength values of the concrete samples were determined. The results showed that the physical and mechanical properties of the concrete were negatively affected by the corrosive conditions.

  • MakaleYalnız künye2013
    Evaluation of the effect of earthquake frequency content on seismic behavior of cantilever retaining wall including soil-structure interaction

    Cakir, Tufan

    A three-dimensional backfill-structure-soil/foundation interaction phenomenon is simulated using the finite element method in order to analyze the dynamic behavior of cantilever retaining wall subjected to different ground motions. Effects of both earthquake frequency content and soil-structure interaction are evaluated by using five different seismic motions and six different soil types. The study mainly consists of three parts. In the first part, following a brief review of the problem, the finite element model with viscous boundary is proposed under fixed-base condition. In the second part, analytical formulations are presented by using modal analysis technique to provide the finite element model verification, and reasonable agreement is found between numerical and analytical results. Finally, the method is extended to further investigate parametrically the effects of not only earthquake frequency content but also soil/foundation interaction, and nonlinear time history analyzes are carried out. By means of changing the soil properties, some comparisons are made on lateral displacements and stress responses under different ground motions. It is concluded that the dynamic response of the cantilever wall is highly sensitive to frequency characteristics of the earthquake record and soil-structure interaction.

  • MakaleYalnız künye2013
    The effect of the spew fillet on an adhesively bonded single-lap joint subjected to bending moment

    Akpinar, Salih; Doru, Muhammet Onur; Özel, Adnan; Aydin, Murat Demir; Jahanpasand, Hamed Ghaffarzadeh

    The mechanical behaviors of an adhesively bonded single lap joint with a spew fillet under bending moment, where the widths of the upper-adherend and lower-adherend are not the same, were studied experimentally and numerically. Using AA2024-T3 aluminum alloy as adherend and DP460 as paste adhesive, four different types of single-lap joint samples (without spew fillet, with spew fillet at joint edges, with spew fillet at joint ends and with spew fillet at all edges) were produced for experimental studies. Stress analyses in the single-lap joint were performed with a three dimensional non-linear finite element method by considering the geometrical non-linearity and non-linear material behaviors of both adhesives (DP460) and adherend (AA2024-T3). The single lap joint with the spew fillet with different widths had a significant effect on the stress distribution. Additionally, the spew fillet increased the load carrying capacity of the joint and decreased the stress concentration of the joint.

  • MakaleYalnız künye2013
    The effects of antifreeze use on physical and mechanical properties of concrete produced in cold weather

    Çullu, Mustafa; Arslan, Metin

    This study examined the effects of antifreeze on the physical and mechanical properties of the concrete which are produced in cold weather. 30% Calcium Nitrate and 5% hydroxyethylaminemixture (HEA), Calcium Nitrate (KN) and Polyhydroxy Amine (PA) were used as additives in antifreeze. Prepared concrete samples were placed in a formwork and exposed to the frost at 0 °C, -5°C, -10°C, -15°C and -20°C for 2 days. Afterwards, concrete samples in the freezer were cured at the room temperature until the 28th day and permeable pore space volume, water absorption ratio, density, capillarity ratio, impermeability, compressive strength, static modulus of elasticity, Poisson's ratio and tensile strength values of the concrete samples were determined after the curing. In conclusion, 30% Calcium Nitrate and 5% hydroxyethylaminemixture (HEA) were found to be giving the best performance among the antifreeze types. The physical and mechanical properties of the concrete were negatively affected from all antifreeze types due to the temperature decrease of the exposed fresh concrete.

  • MakaleYalnız künye2013
    Prediction of offshore bar-shape parameters resulted by cross-shore sediment transport using neural network

    Kömü rcü, Murat Ihsan; Kömür, Mehmet Aydin; Akpinar, Adem; Özölçer, Ismail Hakki; Yüksek, Ömer

    In order to understand the features of coastal zone and to utilize the coastal areas, it is necessary to determine the sediment movement and the resulting transport. Waves, topographic features, and material properties are known as the most important factors affecting the sediment movement and coastal profiles. In this study, by taking into consideration of wave height and period (H0, T), bed slope (m) and sediment diameter (d50), cross-shore sediment movement was studied in a physical model and various bar-shape parameters of the resultant erosion type profile were determined. Using 80 experimental data which are obtained from physical model studies, a neural network (NN) has been calibrated to predict bar-shape parameters of beach profiles. A sensitivity analysis was firstly carried out to decide data of training and test sets. Four different models, in which the rates of their training and testing set data were 80% and 20%, 70% and 30%, 60% and 40%, 50% and 50% were constituted and their performances were compared. It was determined that the model, in which the rate of its training and testing set data was 80% and 20%, respectively, has the best results. Therefore, a total of 64 experimental data were used as training set and the remainders of the experimental data were used as a testing set for the model. The performance of the NN model was compared with the regression equations developed in a previous study and the equations cited in literature indicating better performance over the equations.

    • SDG 14 · Sudaki Yaşam