Sürdürülebilir Kalkınma Amaçları

Yazarlar

  • MakaleYalnız künye2021Scopus SJRQ1
    The Effect of Progressive Muscle Relaxation Exercises on Pain on Patients with Sickle Cell Disease: Randomized Controlled Study

    Kazak, Aysun; Ozkaraman, Ayse

    Purpose: The study aimed to evaluate the effect of progressive muscle relaxation exercises on pain in patients with sickle cell disease. Materials-Method: This randomized controlled interventional study was conducted in a hospital in Mersin, Turkey between October 2017 and July 2018. The study sample comprised 58 patients who were aged >18 years, conscious, had sickle cell disease, reported pain, and were treated with non-opioid or weak opioid analgesic based on the physician's recommendation (treatment group = 29, control group = 29). Data were collected by the individual presentation form and visual analog scale. During the study, both groups were treated with analgesics prescribed by the physician for three days. In addition to the analgesics, the treatment group was performed progressive muscle relaxation exercises for 30 minutes whereas the control group was rested. Pain level of both groups was evaluated at three time points every day for three days. In the study, frequency distributions and descriptive statistics were presented for categorical and numerical variables, respectively. Chi-square analysis, independent samples t-test, Mann–Whitney U test, three-way ANOVA, and Sidak test were used to analyze the difference between the variables. Results: The mean age of the patients was 29.59 ± 6.94 years, and 53.4% of the patients were female and 69% were single. The mean pain score of the treatment group at the third time point on days 1, 2, and 3 was significantly lower than the control group (p <.05). There was no statistically significant difference between the two groups in terms of coping methods for pain, pain location, and complaints accompanying pain (p >.05). Conclusion: Progressive muscle relaxation exercises were found to be effective in the pain management of patients with sickle cell anemia.

    • SDG 3 · Sağlık ve Kaliteli Yaşam
    AtıfScopus7WoS5OpenAlex16
    ScopusWeb of SciencePubMedİncele
  • MakaleYalnız künye2021
    Contribution to the taxonomic knowledge of acanthodactylus (Squamata, lacertidae): Description of a new lacertid lizard species from eastern anatolia, turkey

    Kurnaz, Muammer; Şahin, Mehmet Kürşat

    Acanthodactylus Wiegmann, 1834 is one of the most diverse and widespread lizard genus in the Palearctic realm. Here, we describe a new species, - Acanthodactylus ilgazi sp. nov. - from the Anatolian Peninsula. This new species ranges approximately 250 km north from the closest population of this genus in Turkey. Compared to other fringe-fingered lizards, the new species is phylogenetically close to A. robustus, A. tristrami and A. orientalis but it has some distinct morphological characteristics: Reddish coloration under the tail, a sharp white or grayish stripe in the middle of the dorsum, and four plates in a row on the 4th finger. Moreover, phylogenetic molecular data, based on cyt b gene fragment, verifies that the new species is phylogenetically a member of the tristrami species group with 13.03%, 17.35% and 20.56 genetic distance respectively from A. orientalis, A. tristrami and A. robustus. Lastly, the known range of this species, located in Yazıhan, Malatya in Eastern Anatolia, is restricted by a dam, thus habitat loss endangers its continuity. Therefore, the conservation status of this species should be assessed immediately.

    AtıfScopus6
    Scopusİncele
  • MakaleYalnız künye2021Scopus SJRQ2
    From Turkey: First Report of KPC-3-and CTX-M-27-Producing Multidrug-Resistant Klebsiella pneumoniae ST147 Clone Carrying OmpK36 and Ompk37 Porin Mutations

    Özad Düzgün, Azer

    Aim: The aim of this study was to identify antimicrobial resistance genes, virulence factor genes, and porin loss or mutations exhibited by the multidrug-resistant Klebsiella pneumoniae strain. Materials and Methods: Whole-genome sequencing was done via the Illumina NovaSeq 6000 platform. Strain identification and antibiotic susceptibility testing of strains were performed by the Vitek 2 automated system. Multilocus sequence typing analysis was carried out using seven conserved housekeeping genes. Results: The strain was resistant to penicillins, cephalosporins, carbapenems, aminoglycosides, fluoroquinolones, fosfomycin, and trimethoprim/sulfamethoxazole. The isolate was found to carry KPC-3, CTX-M-27, SHV-11, SHV-67, and TEM-1 β-lactamases. The clonal subtype of the isolate was ST147, and it possessed wzi64 and wzc38 alleles. Fifteen different point mutations (N49S, L59V, R146H, V178P, G189T, F198Y, V202L, F207Y, A217S, T222L, D223G, H235N, A280V, N304E, and S346N) were detected in the OmpK36 porin. A frame shift was observed in OmpK35 and two different point mutations (I70M and I128M) were found in the OmpK37 porin, in addition to seven mutations observed on the AcrR. Conclusions: This study demonstrated for the first time that the ST147 clone produced CTX-M-27 as well as KPC-3. In addition, new mutations were detected in the outer membrane proteins. These mutations together with the production of extended-spectrum β-lactamase and carbapenemase were found to contribute to the resistance of the ST147 clone to carbapenem and other antibiotics.

    • SDG 3 · Sağlık ve Kaliteli Yaşam
    AtıfScopus11WoS11OpenAlex9
    ScopusWeb of SciencePubMedİncele
  • MakaleYalnız künye2021Scopus SJRQ1
    Mineralogical and Chemical Characteristics of Clay Areas, Gümüşhane Region (NE Turkey), and Their Detection Using the Crósta Technique with Landsat 7 and 8 Images

    Vural, Alaaddin; Akpinar, İbrahim; Sipahi, Ferkan

    The clay areas in Gümüşhane (NE Turkey) were examined in mineralogical and geochemical terms, and by remote sensing methods. X-ray diffraction, scanning electron microscope and chemical analysis were completed on samples from 11 selected clay areas in the region. Within the scope of remote sensing, Landsat 7 and 8 satellite images of the region were processed with the Crósta technique to assess the clay areas. The Kale and Tamzı clays are contained within a Late Cretaceous turbiditic series. The clays in Canca, Refene and Çamlıca occur in intensively hydrothermally altered volcanic rocks of the Eocene Alibaba Formation. The other clay areas are in the Liassic Şenköy Formation consisting of a volcano-sedimentary series. The clays in the Şenköy Formation are generally below the coal levels. While mainly illite and lesser kaolinite were determined in Dörtkonak, Alemdar, Yukarı Kov and Çamlıca, the clays in Tahnis and Kabantaşı are smectite. Tekke, Canca and Refene clays are kaolinite with smaller amounts of illite, whereas Kale and Tamzı clays are mainly chlorite with lower content of illite–smectite interlayers. Illites in Dörtkonak, Alemdar, Yukarı Kov and Çamlıca are poor in iron and magnesium and formed by hydrothermal alteration of feldspars in the host rocks. Findings of the remote sensing studies using Landsat 7 and 8 datasets were compatible with the results obtained from field observations and general geological studies, and so it is concluded that the Crósta technique provided good results for exploration of clay occurrences and their determination in the region.

    AtıfScopus14WoS14OpenAlex15
    ScopusWeb of Scienceİncele
  • MakaleYalnız künye2021Scopus SJRQ2
    Biological activity of Psephellus appendicigerus as a natural agent

    Acet, Tuba; Özcan, Kadriye; Sefalı, Abdurrahman

    Psephellus appendicigerus, is a plant endemic to Turkey, belonging to the Asteraceae family, which is traditionally used in folk medicine in Turkey. The aim of this study is to reveal for the first time the biological activities of this plant and evaluate its potential use as a natural product. For this reason, different extracts (ethanol, methanol, ethyl acetate, and hexane) of the plant’s aerial parts were used in determining the antioxidant (2,20-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid and 1,1-diphenyl-2-picrylhydrazyl assays), antimicrobial (disc diffusion and microdilution methods), and enzyme inhibition activity (calorimetric methods) related to diabetes (α-amylase and α-glucosidase). Moreover, the phenolic constituents were analysed by high performance liquid chromatography. Methanol extract of the plant exhibited significant biological activity compared to other extracts. This extract had the highest amount of chlorogenic acid as phenolic compound. In addition, all extracts showed inhibition against at least one test microorganism. According to the results, P. appendicigerus has the potential to be used as a natural antioxidant, antimicrobial and enzyme inhibitor.

    • SDG 3 · Sağlık ve Kaliteli Yaşam
    AtıfScopus2WoS2OpenAlex3
    ScopusWeb of Scienceİncele
  • MakaleYalnız künye2021Scopus SJRQ2
    Preparation of melon peel biochar/CoFe2O4 as a new adsorbent for the separation and preconcentration of Cu(II), Cd(II), and Pb(II) ions by solid-phase extraction in water and vegetable samples

    Ozdes, Duygu; Duran, Celal

    The present research describes the successful preparation of melon peel biochar modified with CoFe2O4 (MPBC/CoFe2O4) followed by its usage as a new sorbent to separate, preconcentrate, and determine the toxic heavy metal ions by magnetic solid-phase extraction. The metal ion desorption was performed by 0.1 M HCl solution with a volume of 5.0 mL. Flame atomic absorption spectrometry (FAAS) was utilized for detection of the analyte levels. SEM–EDX, TEM, XRD, and FTIR techniques were carried out to illuminate the structure of MPBC/CoFe2O4. The fundamental variables affecting the adsorption and elution efficiencies of the analyte ions including solution pH, MPBC/CoFe2O4 amount, type and concentration of eluent, adsorption and desorption equilibrium time, and sample volume were optimized. The detection limits were calculated as 0.41, 1.82, and 3.16 µg L−1 for Cu2+, Cd2+, and Pb2+ ions, respectively, with the relative standard deviation of lower than 4.2%. There were no substantial interference effects on the analyte ion recovery due to the presence of foreign ions at high levels. Five minutes of contact time was adequate to attain the adsorption equilibrium. The adsorption capacity of MPBC/CoFe2O4 was obtained as 106.4, 65.4, and 188.7 mg g−1 for Cu2+, Cd2+, and Pb2+ ions, respectively, by utilizing Langmuir isotherm model. The pseudo-second order model is favorable to identify the adsorption kinetics. The method was validated by spike/recovery test, and then, it was successfully implemented to determine the aforementioned analyte levels in sea and stream water, pepper, black cabbage, eggplant, and tomato samples.

    • SDG 6 · Temiz Su ve Sanitasyon
    • SDG 12 · Sorumlu Üretim ve Tüketim
    AtıfScopus40WoS38OpenAlex39
    ScopusWeb of SciencePubMedİncele
  • MakaleYalnız künye2021Scopus SJRQ2
    U–Pb zircon ages and petrogenesis of the Late Cretaceous I-type granitoids in arc setting, Eastern Pontides, NE Turkey

    Kaygusuz, Abdullah; Arslan, Mehmet; Temizel, İrfan; CemYücel; Aydınçakır, Emre

    The Eastern Pontides Orogenic Belt (EPOB) as a well-preserved ancient magmatic arc situated in the eastern part of the Sakarya Zone and has key importance to allow for proper reconstruction of the geodynamic evolution of the region. The region accepted as important part of Alpine–Himalayan Belt comprises of many granitoids of the Late Cretaceous age. This paper presents new mineral chemistry, bulk-rock petrochemistry, U-Pb geochronology and radiogenic and stable isotope geochemistry data from the Arpaköy and Oyman granitoids in the north part of the EPOB to interpretation of the igneous activity and geodynamic evolution of the region in Late Cretaceous era. Emplacement ages of 86.82 ± 0.58 Ma for the Oyman granitoid and 82.0 ± 2.3 Ma for the Arpaköy granitoid according to laser ablation ICP-MS U–Pb zircon dating. The Arpaköy granitoid are gabbro diorite, diorite and granite, whereas the Oyman granitoid are tonalite and granite in composition. They show metaluminous-peraluminous transitional (ASI = 0.79–1.20) low to medium-K calc-alkaline features. The rock samples from granitoids are characterized by enrichment in large ion lithophile elements (LILE) and high field strength elements (HFSE) depletion with concave-upward shapes (LaN/LuN = 1.88 to 6.04). The crystallization temperatures are 648 °C–913 °C and the pressure values are 0.2–3.0 kbar, which indicates emplacement depth of the studied granitoids varying from ~1 to 9 km correspond to shallow crustal depths. They show considerable variations in εNd(i) (−4.02 to 1.50) and 87Sr/86Sr(i) (0.70478–0.70689). The 206Pb/204Pb ratios are between 17.97 and 18.65, and δ18O are varying from +5.4 to +9.3‰. The parental magma of the Arpaköy and Oyman granitoids originated from a melt of the enriched lithospheric mantle and the fractional crystallization and lesser assimilation processes has important role on the evolution of magmas in the shallow crustal levels.

    AtıfScopus29WoS29OpenAlex31
    ScopusWeb of Scienceİncele
  • MakaleAçık Erişim2021Scopus SJRQ2
    Constrained adaptive backstepping control of a semi-active suspension considering suspension travel limits

    Yıldız, Ali Suat; Sivrioğlu, Selim

    In this article, a new constrained adaptive backstepping control design is presented for vibration suppression of the quarter car suspension system equipped with a magnetorheological (MR) damper. In the controller design, parametric uncertainties related to suspension parameter and the semi-active actuator are considered. Also, the proposed controller is investigated, along with the designed road profiles based on the International Standard Organization (ISO) 8608 classification and tested under different speed conditions. The effectiveness of the proposed controller has been validated through comparisons with uncontrolled, passive, and separately designed adaptive control cases. According to the simulation and experimental results, the proposed control approach improves ride comfort and ride safety without violating suspension rattle space constraint despite the uncertainties in suspension parameters.

    • SDG 9 · Sanayi, Yenilikçilik ve Altyapı
    AtıfScopus20WoS19OpenAlex18
    ScopusWeb of Scienceİncele
  • MakaleYalnız künye2021Scopus SJRQ2
    Inhibition Profiles of Some Symmetric Sulfamides Derived from Phenethylamines on Human Carbonic Anhydrase I, and II Isoenzymes

    Topal, Fevzi; Aksu, Kadir; Gulcin, Ilhami; Tümer, Ferhan; Goksu, Süleyman

    In this work, the inhibitory effect of some symmetric sulfamides derived from phenethylamines were determined against human carbonic anhydrase (hCA) I, and II isoenzymes, and compared with standard compound acetazolamide. IC50 values were obtained from the Enzyme activity (%)-[Symmetric sulfamides] graphs. Also, Ki values were calculated from the Lineweaver-Burk graphs. Some symmetric sulfamides compounds (11–18) demonstrated excellent inhibition effects against hCA I, and II isoenzymes. These compounds demonstrated effective inhibitory profiles with IC50 values in ranging from 21.66–28.88 nM against hCA I, 14.44–30.13 nM against hCA II. Among these compounds, the best Ki value for hCA I (Ki: 8.34±1.60 nM) and hCA II (Ki: 16.40±1.00 nM) is compound number 11. Besides, the IC50 value of acetazolamide used as a standard was determined as hCA I, hCA II 57.75 nM, 49.50 nM, respectively. Moreover, in silico ADME-Tox study showed that all synthesized compounds (11–18) had good oral bioavailability in light of Jorgensen's rule of three, and of Lipinski's rule of five.

    • SDG 3 · Sağlık ve Kaliteli Yaşam
    AtıfScopus13WoS12OpenAlex14
    ScopusWeb of SciencePubMedİncele
  • MakaleAçık Erişim2021Scopus SJRQ3
    Determination of Antimicrobial and Antioxidant Activities and Chemical Components of Volatile Oils of Atropa belladonna L. Growing in Turkey

    Öz, Mehmet; Fidan, Muhammed Said; Baltaci, Cemalettin; Ücüncü, Osman; Karatas, Seyda Merve

    In this study; the essential oils were obtained from the flowers and leaves of Atropa belladonna L. plants through the hydrodistillation method in a Clevenger type device. The chemical composition of volatile oils was determined by analyzing with the GC-MS/MS instrument. The antioxidant activity of the obtained volatile oils was determined according to total antioxidant content (TAC), free radical scavenging (ABTS) capacity, free radical scavenging (DPPH) amounts, total flavonoid content (TFC), total phenolic content (TPC), and ferric reducing antioxidant power (FRAP) capacity methods. Antimicrobial activities of essential oils were determined through the agar-disc diffusion method. As for the results; volatile oil yields of the A. belladonna were determined as 0.37 % in leaves and 1.57 % in flowers. The highest percentage of chemical compounds in essential oils of the A. belladonna plant were determined as (43.75 %) aldehydes in leaves and as (39.96 %) fatty acids in flowers. In addition, the main constituents found in volatile oils were eicosane (35.92 %) in the leaves and hexadecenoic acid (18.84 %) in the flowers of the A. belladonna. The highest amounts of antioxidant for the test specimens were found as 1.37-1.48 mg QE/100 mL in TFC, as 13.25-21.91 mg AA/100 mL in ABTS, as 51.49-62.87 mg GA/100 mL in TPC, and as 4.71-7.97 mg FeSO4/100 mL in FRAP capacity. As the results of the antimicrobial activities, it was determined that only the leaves of A. belladonna show antimicrobial activity against the mold-yeast and gram-positive and gram-negative bacteria microorganisms among the 17 bacteria and 6 yeast-mold types used in the study.

    • SDG 3 · Sağlık ve Kaliteli Yaşam
    AtıfScopus12WoS8OpenAlex11
    ScopusWeb of Scienceİncele
  • MakaleYalnız künye2021Scopus SJRQ1
    Effect of far infrared heating process on surface decontamination and quality attributes of whole yellow and white onions

    Coskun, Eda; Ozturk, Samet; Akpinar, Merve; Halkman, A. Kadir; Erdogdu, Ferruh

    This study aimed to develop an effective decontamination process for whole yellow and white onions with maintained quality attributes. For this purpose, a far infrared radiation (FIR) process was evaluated to determine its effects on microbial safety and quality of the onions. Prior to the FIR process, samples were inoculated with Salmonella culture to about 7–8 log10 CFU/cm2 and stored for 1–48 h at room temperature. Inoculated samples were then processed up to 120 s at 400 °C infrared source temperature. Temperature chance of the onions was recorded by using T-type thermocouples, and surface temperature distribution was obtained with an infrared thermal camera. Quality attributes (color changes, mass losses and textural changes) were also evaluated following the FIR process. The results indicated that 3.3 and 2.4 log10 CFU/cm2 reductions in the Salmonella counts were obtained for the whole yellow and white onions, stored for 1 h at room temperature after 120 s FIR processing. The background microbial population on the outer skin of the onions was under the detection limit (<1 log10 CFU/g). It was observed that the effectiveness of FIR treatment on Salmonella decontamination decreased as the storage time increased from 1 to 48 h at room temperature. FIR process did not significantly affect the quality attributes of the onions, and the results confirmed the potential use of FIR process for surface decontamination of the onions. Further studies were suggested to design an effective FIR system for industrial scale applications.

    • SDG 2 · Açlığa Son
    • SDG 3 · Sağlık ve Kaliteli Yaşam
    AtıfScopus17WoS15OpenAlex14
    ScopusWeb of Scienceİncele
  • MakaleAçık Erişim2021Scopus SJRQ3
    The effect of pozzolans and mineral wastes on alkali-silica reaction in recycled aggregated mortar

    Külekçi, Gökhan

    In this study, it was aimed to examine recycled aggregates (RA), which are considered as aggregates, in terms of alkali-silica reaction (ASR) before being used in concrete, to determine the risk status and to reduce the ASR value. In order to reduce and stop the ASR, the cement was replaced with clay brick and fly-ash by 10–40 %. Marble waste and Pb-Zn mine waste were used instead of RA in order to reduce aggregate reactivity. At the end of 28 days, compared to the control sample, it was observed that mortar bar samples containing tailings instead of fine RA has 18 % less expansion and marble waste (MW) added samples again instead of fine RA has 34 % less expansion. Furthermore, 40 % fly ash (FA) added samples decreased the level of ASR for 96 %, and in 10 % clay brick mixed samples ASR formation is decreased to 85 %. As a result, recycled aggregates were determined to be reactive for ASR. It has been determined that marble and lead-zinc mine facility wastes added as replace with to RA reduce the expansion effect by ASR in the cement paste. With this study, it has contributed to the safe use of the increasing use of RA in the world.

    • SDG 12 · Sorumlu Üretim ve Tüketim
    AtıfScopus11WoS11OpenAlex8
    ScopusWeb of Scienceİncele
  • MakaleAçık Erişim2021Scopus SJRQ4
    Wear, Corrosion and Tribocorrosion Behavior of Polyurethane and Polyvinylpyrrolidone Blends as Coating for Corrosion Protection of AISI 316L Stainless Steel

    Taşdemir, Muharrem; Şenaslan, Fatih; Çelik, Ayhan

    Polyurethanes (PUs) are used across a widely from biomaterials to industrial applications due to their versatile properties. Polyurethane is blended with other polymers to improve their physical and thermal properties. In this study, different concentrations of polyurethane and polyvinylpyrrolidone (PVP) blends were applied to AISI 316L stainless steel using the dip coating method as protection against wear and corrosion. The effects of different concentrations of blends on the mechanical, corrosion and tribocorrosion properties of the AISI 316L stainless steel were investigated. The phase structure of polymer coatings were investigated by X-ray diffraction (XRD), and their surfaces were examined by scanning electron microscopy (SEM). Corrosion and tribocorrosion tests of the polymer coated samples were carried out in 3.5% NaCl solutions. The surface roughness and nanohardness of the polymeric coated samples were also measured. It was found that surface roughness and friction coefficient increased with raised concentration of PVP, while wear and corrosion resistance decreased with the increased of PVP concentration in the coating. As the penetration depth of the PU coated sample increased, the nanohardness and elasticity modulus decreased. Coatings containing PVP up to 25% protected the substrate surface under tribocorrosion conditions in NaCl solutions.

    AtıfScopus6WoS5OpenAlex6
    ScopusWeb of Scienceİncele
  • MakaleYalnız künye2021Scopus SJRQ3
    The First Measurement for Mass Attenuation Coefficients, Effective Atomic Numbers, and Electron Densities of Y123 and Y358 High-Temperature Superconductors (HTS) for the Energies from 46.6 to 1332 keV

    Düzgün, İbrahim

    Y123 and Y358 high-temperature superconductor phases have experimental mass attenuation coefficients (MAC) determined at 46.5, 81, 122, 302, 356, 383, 662, 1173, and 1332 keV photon energies. The experimental values have been compared with theoretical values acquired employing the XCOM software and database. It has been observed that the theoretical and the empirical results were in perfect agreement. Also, it has been seen that the comparison of the MACs for all specimens examined with the corresponding photon energies complies with the exponential absorption law. The effective atomic numbers (Zeff) and electron densities (Nel) of Y123 and Y358 superconducting phases in different energy ranges have determined experimentally and theoretically. The Y358 superconductor specimen is a relatively better absorber than the Y123 between 40 and 100 keV.

    AtıfScopus3WoS4OpenAlex2
    ScopusWeb of Scienceİncele
  • Derleme MakaleAçık Erişim2021
    COVID-19 vaccine and immune response

    Hintistan, Sevilay; Demirağ, Hatice

    Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2; βCoV), the causative agent of coronavirus disease 2019 (COVID-19), causes severe lower respiratory tract infections and acute respiratory failure syndrome (ARDS). Deaths due to the ongoing COVID-19 pandemic for more than a year are still seen worldwide. Therefore, vaccine trials have gained importance. The discovery of the genome and protein structure of SARS-CoV-2 in a short time allowed the development of nucleic acid-based vaccines (mRNA and DNA vaccines), vector vaccines, inactivated virus vaccines, protein-based vaccines, virus-like particle vaccines, and live attenuated virus vaccines. Many companies, universities, and institutes around the world continue to develop effective vaccines against SARS-CoV-2. In this review, the structural features, classification, genome, and intracellular entry of SARS-CoV-2 coronaviruses, stimulation of the immune system and immunity, COVID-19 vaccine types, and the latest status of clinical trials of these vaccines have been reviewed.

    • SDG 3 · Sağlık ve Kaliteli Yaşam
    AtıfScopus1OpenAlex2
    Scopusİncele
  • MakaleYalnız künye2021Scopus SJRQ2
    Performance evaluation of IEEE 802.15.7 CSK modulation under blue shift effect of optical receiver filters

    Küçük, Mehmet Ali; Türk, Kadir

    In recent years, the use of light-emitting diodes (LEDs) in lighting, which has higher energy efficiency and longer-lasting environmentally friendly lighting compared to conventional lighting devices, has accelerated the development of a promising new technology for short-range wireless optical transmission called visible light communication (VLC). Besides other applications, VLC switches the LEDs at very high speeds to simultaneously realize indoor lighting and data transmission. But the intensity and color of the lighting may vary because of data transmission. Color shift keying (CSK) modulation defined in the IEEE 802.15.7 VLC standard guarantees constant light intensity and color. The CSK receiver uses a band-pass optical filter to separate the light channels. However, the transition band of optical filters shifts towards the blue wavelength depending on the incidence angle of the light which is called the blue shift effect. In this paper, the performance of the CSK receiver is investigated for the first time under the blue shift effect in the case of single and multiple transmitter LED cells. The numerical results show that the blue shift effect significantly decreases system performance. To eliminate the distorting effect, various methods and an adaptive equalizer-based CSK receiver are proposed. The proposed structures provide notable improvement.

    AtıfScopus9WoS9OpenAlex7
    ScopusWeb of Scienceİncele
  • MakaleYayıncıda açık erişim2021
    Automatic extraction of trees by using multiple return properties of the lidar point cloud

    Ozdemir, Samed; Akbulut, Zeynep; Karsli, Fevzi; Acar, Hayrettin

    Airborne laser scanning has been a valuable tool for forestry applications since it began to be used commercially. Thanks to the high 3D resolution provided by the Light Detection and Ranging (LiDAR) point cloud, it has provided great convenience in complex 3D modeling processes needed for forestry applications such as forest inventory, forest management, determination of carbon stocks and the characterization of biodiversity. LiDAR data provides a new dimension in forestry applications with its high 3D resolution and multiple return characteristics. The extraction of woodland areas from the LiDAR point cloud has great importance for automating the determination of tree heights, species and stand frequency which will be used for generating canopy height models (CHM). In this study, woodland areas in the urban scene were automatically extracted by using the multiple return properties of the LiDAR point cloud. The proposed approach consists of three major steps namely pre-processing, parameter calculation and k-d tree search for trees which were implemented in MATLAB. In the first step, multiple return points have been identified from the LiDAR point cloud, which will be then used to determine possible tree locations. Then, by using Density-Based Spatial Clustering of Applications with Noise (DBSCAN) algorithm, neighborhood relations among the multi return points which were extracted from the initial point cloud data, were formed and a rule-based filter was applied by taking advantage of neighborhood relations. In addition, the initial point cloud was filtered with the Cloth Simulation Filtering (CSF) algorithm to separate ground and non-ground points where non-ground points used to extract trees. In the second step, non-vegetation points were removed by applying a threshold based on the change of curvature and planarity parameters, which are derived from the filtered non–ground point cloud. In the last step, in order to extract trees, a k-d tree structure was created from the filtered non-ground points to find nearest neighbors of each multi return point within a given diameter in the k-d tree structure. In order to evaluate the accuracy of the approach, the extracted boundaries were compared with the manually digitized woodland boundaries from the true orthophoto of the study area using correctness, completeness and quality metrics.

    • SDG 15 · Karasal Yaşam
    AtıfScopus27WoS23OpenAlex32TR Dizin6
    ScopusWeb of ScienceTR Dizinİncele
  • MakaleYalnız künye2021Scopus SJRQ3
    The Effect of Grain Growth Temperature on the Trapped Magnetic Field of Y358 Superconductors

    Başoğlu, M.

    In this study, three different Y358 samples were produced by the melt-powder-melt-growth (MPMG) method at different maximum grain growth temperatures of 1030 °C, 1040 °C, and 1050 °C. The differential thermal analysis (DTA), X-ray powder diffraction (XRD), magnetic levitation force, trapped magnetic field values and magnetization measurements were performed. According to the results, the highest magnetic levitation force, the highest critical current density and the highest trapped magnetic field values were obtained from the sample produced at the temperature of 1050 °C.

    AtıfScopus5WoS5OpenAlex5
    ScopusWeb of Scienceİncele
  • MakaleYalnız künye2021Scopus SJRQ2
    The effect of complementary and integrative medicine on symptom management and quality of life in Turkish oncology patients: a cross-sectional study

    Demir Doğan, Melike; Savuci, Yıldız; Aydın Sayılan, Aylin

    Aim: This study was conducted to determine the perceived effect of complementary and integrative medicine CIM) methods used by oncology patients on their symptom management and quality of life patients attending a Turkish oncology setting. Methods: 145 oncology Turkish oncology patients were surveyed between July 2018 and August 2018. Data were collected on personal and demographic information, the Edmonton Symptom Assessment Scale, The Nightingale Symptom Assessment Scale. Complementary and integrative medicine use was determined by the Complementary and Alternative Medicine (CAM) Scale. Results: Age had a positive significant correlation with CIM use, particularly manipulative and herbal approaches. Educational status had a negative significant correlation with CIM use and cognitive-behavioral therapy subscale. A positive significant correlation was determined between the duration of cancer diagnosis and the cognitive-behavioral therapies subscale. A positive significant correlation was determined between cognitive-behavioral therapies subscale and social well-being state. Conclusion: CIM approaches are commonly used by Turksih oncology patients.

    • SDG 3 · Sağlık ve Kaliteli Yaşam
    AtıfWoS1OpenAlex1
    ScopusWeb of Scienceİncele
  • MakaleAçık Erişim2021Scopus SJRQ4
    Optimization of three-element tuned mass damper for single degree of freedom structures under ground acceleration; [Yer ivmesi etkisi altındaki tek serbestlik dereceli yapılar için üç elemanlı ayarlı kütle sönümleyicinin optimizasyonu]

    Araz, Onur

    Passive control devices have been used for a long time to reduce unwanted vibrations. The most commonly used of these devices are tuned mass dampers. The optimum parameters of the three-element tuned mass damper for damped main structures due to ground acceleration are investigated in this paper. Unlike the traditional tuned mass damper, the three-element tuned mass damper contains two spring elements and one of them is connected in series with the damping element. The optimum parameters are obtained by simulated annealing algorithm. Numerical results show that the three-element tuned mass damper is very effective in reducing dynamic vibrations of the damped structures.

    AtıfScopus30OpenAlex19TR Dizin1
    ScopusTR Dizinİncele