Sürdürülebilir Kalkınma Amaçları
Yazarlar
Yayınlar
- MakaleYalnız künye2023Scopus SJRQ2Application of Magnetic Fe3O4 Alnus glutinosa Sawdust Biochar/SiO2/CTAB as a New Sorbent for Magnetic Solid Phase Extraction of Heavy Metals from Fruit and Waters Samples
Duran, Celal; Ozdes, Duygu
The coating of magnetic Fe3O4 Alnus glutinosa sawdust biochar with SiO2 and further functionalising by cetyltrimethyl ammonium bromide (CTAB), a cationic surfactant, was described for the first time in the current paper. The magnetic Fe3O4 Alnus glutinosa sawdust biochar/SiO2/CTAB(MAGBC/SiO2/CTAB) was implemented to separate and preconcentrate the Cu2+, Cd2+, and Pb2+ions efficiently in waters and a number of fruit samples by solid-phase extraction (SPE) method. Adsorbent characterisation was realised by fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). Fundamental factors affecting the extraction yield of the analyte ions including solution pH, adsorbent amount, sample volume and desorption contact time were fully researched and optimised as 8.0, 0.25 g, 500 mL and 60 min, respectively, and the eluent was specified as 5.0 mL of 0.1 M of HCl solution. The adsorption equilibrium eventuated after 15 min of contact time and it was noticed that the chemisorption mechanism was dominant upon the analyte ions adsorption. The limits of detection (LOD) were calculated as 0.24, 0.62 and 1.55 µg L−1 and the limits of quantitation (LOQ) were determined as 0.81, 2.08, and 5.17 µg L−1 for Cu2+, Cd2+, and Pb2+ ions, respectively. The relative recoveries (RR%) were in the ranges of 93.3–103.4%, 92.5–102.8%, and 91.8–101.9% for Cu2+, Cd2+, and Pb2+ ions, respectively, while the relative standard deviations (RSD%) were obtained lower than 4.0% (n = 10) by applying the method at optimised conditions. The maximum adsorption capacities of MAGBC/SiO2/CTAB were obtained as 123.7, 80.0 and 118.5 mg g−1for Cu2+, Cd2+, and Pb2+ions, respectively. Consequently, the developed new, simple, rapid, sensitive, and economical SPE method based on MAGBC/SiO2/CTAB was successfully implemented to waters and some of the fruit samples to determine the Cu2+, Cd2+, and Pb2+ions simultaneously.
AtıfScopus15WoS17OpenAlex17
İncele - MakaleAçık Erişim2013Scopus SJRQ3Solid phase extraction of Cd(ii) and pb(ii) ions by a new carbothioamide derivative
Ozdes, Duygu; Duran, Celal; Bayrak, Hacer; Serencam, Huseyin; Basri Senturk, Hasan
An effective, simple, low cost and accurate sorption-spectrophotometric platform for the extractions and subsequent quantifications of Cd(II) and Pb(II) ions in food and environmental samples has been described in this dissertation. The separation and preconcentration of the analyte ions were accomplished by solid phase extraction method based on the adsorption of their N-(4-methylphenyl)-2-{[(4-phenyl-5-pyridin-4-yl-4H-1,2,4-triazol-3-yl)thio] acetyl} hydrazinecarbothioamide (MFPTAHK) complex on Amberlite XAD-8 resin in a mini column. The developed method was systematically investigated in different set of experimental parameters that influence the separation and preconcentration of Cd(II) and Pb(II) ions. The precision of the method was determined by reproducibility studies and expressed as relative standard deviations (RSD %) which were less than 4% for both analyte ions. The limits of detections (LODs) for Cd(II) and Pb(II) ions based on the three times the standard deviation of the blanks (N:10) were found to be 0. 31 ?g L-1 and 0. 86 ?g L-1, respectively. The developed SPE procedure was utilized for the simultaneous extraction and determinations of Cd(II) and Pb(II) ions levels in rice, cracked wheat and red lentil as food samples and various water samples.
AtıfScopus5WoS4OpenAlex5İncele - MakaleYalnız künye2013Scopus SJRQ2Separation and pre-concentration of palladium(II) from environmental and industrial samples by formation of a derivative of 1,2,4-triazole complex on Amberlite XAD-2010 resin
Serencam, Huseyin; Bulut, Volkan Numan; Tufekci, Mehmet; Gundogdu, Ali; Duran, Celal; Hamza, Sibel; Soylak, Mustafa
A simple separation/pre-concentration method was developed for extraction of Pd(II) in various environmental samples, based on its adsorption of 4-phenyl-5-{[(4-phenyl-5-pyridin-4-yl-4H-1,2,4-triazole-3-yl)thio]methyl}-4H-1,2,4-triazole-3-thyol (PPTTMET) complex on Amberlite XAD-2010 resin in a mini column. The ligand has high affinity for Pd(II) among many other metals that are taken into consideration. The flame atomic absorption spectrometry is employed to determine the concentration of Pd(II). The optimum working conditions which were determined are as follows: 0.05 mol L-1 HNO3 as working medium, 1.0 mol L-1 HCI in acetone as elution solvent, 0.75 mg of PPTTMET amount and 750 mL of sample volume. The system was independent from the flow rates between 3.1 and 23.1 mL min-1. The Pd(II) adsorption capacity of Amberlite XAD-2010 resin was found to be 12.8 mg g-1 and the enrichment factor was calculated as 375. The method was successfully applied for the determination of Pd(II) in motorway dust samples, anodic sludge, gold ore, industrial electronic waste materials and various water samples.
AtıfScopus17WoS15OpenAlex17İncele - MakaleAçık Erişim2013Scopus SJRQ3Separation and preconcentration of copper in environmental samples on amberlite XAD-8 resin after complexation with a carbothioamide derivative
Elvan, Hamide; Ozdes, Duygu; Duran, Celal; Sahin, Deniz; Tufekci, Mehmet; Bahadir, Zekeriyya
A new solid phase extraction (SPE) method has been developed for the selective separation and preconcentration of Cu (II) ions in food and water samples prior to its flame atomic absorption spectrometry determination. The method is based on the adsorption of the Cu(II)-2-{[4-Amino-3-(4-methylphenyl-5- oxo-4,5-dihydro-1H-1,2,4-triazol-1-yl]acetyl}-N-phenyl hydrazinecarbothioamide complex on Amberlite XAD-8 resin. The metal complex retained on the resin was eluted with 7.5 mL of 2.0 mol L-1 HCl in acetone. The optimum conditions for the SPE of Cu(II) ions were investigated, and the method was subsequently applied to sea water, stream water, rice, tea, and tobacco samples for the determination of Cu(II) levels.
AtıfScopus11WoS11OpenAlex13İncele