Sürdürülebilir Kalkınma Amaçları
Yayınlar
- MakaleAçık Erişim2026Effects of drying methods on physicochemical properties and bioactive compounds of wild fruits native to the Gümüşhane flora of NE Türkiye
Bulut, Volkan Numan; Baltaci, Cemalettin; Gundogdu, Ali; Barlak, Esra
Wild fruits are valuable natural sources of bioactive compounds with significant nutritional and functional properties. This study comparatively evaluated the effects of freeze-drying (FD), oven drying (OD), and open-air drying (AD) on the physicochemical properties, total phenolic content (TPC), vitamin C content, and antioxidant properties of five wild fruit species naturally growing in the Gümüşhane region of Türkiye: wild pear (Pyrus elaegrifolia Pall.), hawthorn (Crataegus orientalis), rosehip (Rosa canina L.), cornelian cherry (Cornus mas L.), and barberry (Berberis vulgaris). Drying method markedly affected both physicochemical characteristics and bioactive compounds. Oven drying produced the lowest water activity values (0.10–0.34), indicating enhanced microbiological stability, whereas freeze-dried samples generally showed superior preservation of phenolic compounds and antioxidant activity. The highest TPC was observed in air-dried cornelian cherry (935.59 mg GAE/kg), while freeze- dried rosehip exhibited the highest TPC among freeze-dried samples (907.63 mg GAE/kg). Vitamin C was highly sensitive to thermal processing, and most oven-dried samples showed values below the detection limit (<0.30 mg/kg). In contrast, freeze-dried rosehip retained the highest vitamin C content (1594 mg/kg). Freeze-dried cornelian cherry exhibited the highest DPPH radical scavenging activity (93.45%), whereas oven-dried rosehip showed the highest total antioxidant content (33.38 mg/g). The relatively high antioxidant values observed in some oven-dried samples may also be partially associated with the formation of Maillard reaction products exhibiting antioxidant properties under thermal processing conditions. Correlation and hierarchical cluster analyses revealed statistically significant (p < 0.05) fruit-specific differences in antioxidant behavior and clustering patterns, indicating that the responses to drying treatments were more strongly influenced by fruit matrix composition than by drying method alone. The findings demonstrate that the effects of drying treatments are strongly fruit matrix-dependent and that no single drying method is universally optimal for preserving all quality attributes of wild fruits.
- MakaleAçık Erişim2022Geochemical investigation of the potability of surface water in Çit River and related creeks in Avliyana Basin (Gümüşhane, NE Türkiye)
Saka, Fatih; Soylak, Mustafa; Bulut, Volkan Numan; Vural, Alaaddin; Gundogdu, Ali
In the study, physico-chemical parameters of Çit Stream and related creeks in Avliyana Basin (Gümüşhane, NE Turkey) were determined. In terms of physical parameters, it is seen that the Büyük Çit Stream has drinking water quality. According to piper diagram, all of the samples except one have fallen into region of class of CaCO3 and MgCO3 waters. The different one is the mixed water class. It has been determined that the metal content that may pose a risk to water is below the permissible limits. It has been seen that there may be only one point of risk for lead. As a result, physico-chemical aspect of water quality of Çit River and related creeks in Avliyana Basin has been seen to be suitable for drinking water standards.
- MakaleYalnız künye2018Copper, Zinc, Magnesium and Calcium Levels in Royal Jelly That Produced in Bursa Province
Uçar, Meltem; Bulut, Volkan Numan; Vanizor Kural, Birgül; Kopuz, Müge; Değer, Orhan; Aliyazıcıoğlu, Rezzan; Cengiz, Sevil
Aim: Royal jelly is a bee product that secreted from glands of young worker bees and used resource of food for larvae and queen honeybee. Royal jelly which is very important for physiological development of queen honeybee and larvae, also used by people due to the nutritional properties and positive effects on health. Royal jelly contains water, lipid, protein, carbohydrate, amino acid, short peptide, vitamin, phenolic compounds, trace element and minerals. It was suggested that composition of royal jelly varies depending on the geographical structure of the zone, climate, flora that it is produced, storage condition and bees race. There are also publications which suggest that mineral content of royal jelly is independent of geographical structure and climate, but only varies depending on the harvesting time. There are not so many study related with chemical composition and biological properties of royal jelly that is produced in Turkey. In this study, it was aimed to determine some element levels in royal jelly samples that obtained from Bursa province, Mustafakemalpaşa district. Material and Methods: Element levels of copper (Cu), zinc (Zn), magnesium (Mg) and calcium (Ca) determined by Atomic Absorption Spectrophotometer (AAS) (n=3). For each element, the results were exhibited as mean±standard deviation. Results: The amount of Cu was determined 3.25±0.05 mg/kg, the amount of Zn was 23.87±1.33 mg/kg, the amount of Mg was 794.33±38.44 mg/kg and the amount of Ca was 250.87±24.49 mg/kg in Bursa royal jelly. Conclusion: Element levels of Bursa royal jelly are at a level that can contribute to daily mineral requirement. However, there is a need for further in vivo studies on the availability of mineral additives and their therapeutic utility.
- MakaleYalnız künye2016A novel carrier element-free co-precipitation method for separation/preconcentration of lead and cadmium ions from environmental matrices
Bulut, Volkan Numan; Demirci, Hamit; Ozdes, Duygu; Gundogdu, Ali; Bekircan, Olcay; Soylak, Mustafa; Duran, Celal
A new separation and pre-concentration method was presented in this study for two trace heavy metal ions, lead (Pb2+) and cadmium (Cd2+) from aqueous solutions, based on a carrier element free co-precipitation (CEFC) method using a triazole derivate, 3-(4-tert-butylphenyl)−5-phenyl-4-(2-hydroxy-5-methoxybenzylamino)−4H-1,2,4-triazole as an organic co-precipitating agent. The method was optimized with some analytical parameters which affect the quantitative recoveries of study metals. According to the results, optimum pH of solution, quantity of co-precipitating agent, centrifugation and incubation time, and sample volume were determined as 6.0, 1.5 mg, 10 min, and 10 min, and 100 mL, respectively. In addition, no significant matrix interferences were observed over the recovery of the metal ions. For analytical figure of merit, RSD values of the method were found as 5.7 and 4.8 for Pb2+ and Cd2+, respectively. LOD values were also calculated as 2.0 µg L−1 for Pb2+ and 0.2 µg L−1 for Cd2+. The accuracy of method was checked with spiked/recovery tests and analysis of a standard reference material. The developed method was finally applied to the real liquid/solid samples under the optimum conditions.
- MakaleYalnız künye2014Separation and preconcentration of lead, chromium and copper by using with the combination coprecipitation-flame atomic absorption spectrometric determination
Bahadır, Zekeriyya; Bulut, Volkan Numan; Ozdes, Duygu; Duran, Celal; Bektas, Hakan; Soylak, Mustafa
A coprecipitation method was developed for the quantitative separation and preconcentration of Pb(II), Cr(III) and Cu(II) ions. Analytes were coprecipitated using a triazole derivative (2-{4-[2-(1H-indol-3-yl)ethyl]-3-(4-chlorobenzyl)-5-oxo-4,5-dihydro-1H-1,2,4-triazol-1-yl}. N-aryl methylidene acetohydrazid). The analytes were analyzed by flame atomic absorption spectrometry. The parameters such as sample pH, amount of reagent, sample volume, matrix effects etc. were investigated. The enrichment factor for the analyzed metal ions was obtained as 50. The relative standard deviations (RSD) were in the range of 2.8-4.1%. The accuracy of the proposed procedure was checked by the analysis of the CRM-C-Sandy Soil C. The method was successfully applied to real samples.
- MakaleYalnız künye2013Separation and pre-concentration of palladium(II) from environmental and industrial samples by formation of a derivative of 1,2,4-triazole complex on Amberlite XAD-2010 resin
Serencam, Huseyin; Bulut, Volkan Numan; Tufekci, Mehmet; Gundogdu, Ali; Duran, Celal; Hamza, Sibel; Soylak, Mustafa
A simple separation/pre-concentration method was developed for extraction of Pd(II) in various environmental samples, based on its adsorption of 4-phenyl-5-{[(4-phenyl-5-pyridin-4-yl-4H-1,2,4-triazole-3-yl)thio]methyl}-4H-1,2,4-triazole-3-thyol (PPTTMET) complex on Amberlite XAD-2010 resin in a mini column. The ligand has high affinity for Pd(II) among many other metals that are taken into consideration. The flame atomic absorption spectrometry is employed to determine the concentration of Pd(II). The optimum working conditions which were determined are as follows: 0.05 mol L-1 HNO3 as working medium, 1.0 mol L-1 HCI in acetone as elution solvent, 0.75 mg of PPTTMET amount and 750 mL of sample volume. The system was independent from the flow rates between 3.1 and 23.1 mL min-1. The Pd(II) adsorption capacity of Amberlite XAD-2010 resin was found to be 12.8 mg g-1 and the enrichment factor was calculated as 375. The method was successfully applied for the determination of Pd(II) in motorway dust samples, anodic sludge, gold ore, industrial electronic waste materials and various water samples.
- MakaleYalnız künye2013Heavy metal analysis by moss species in the Black Sea region of Turkey
Koz, Bahadir; Cevik, Ugur; Bulut, Volkan Numan; Kaya, Selim; Gundogdu, Ali; Celik, Necati
The heavy metal analysis of mosses in the Black Sea region of Turkey was determined using atomic absorption spectrometry method. The procedure was also validated by analysis of standard reference material (IAEA-336 Lichen). A qualitative analysis showed that the samples contained chromium, manganese, cobalt, nickel, copper, zinc, and lead. While the mean concentration values of Cr, Mn, Co, Ni, Cu, Zn, and Pb in the moss samples collected from city centers are 60.6, 820, 12.2, 18.8, 293, 181 and 39.8 mg.kg-1, the mean concentration values in the moss samples collected from the city intervals are 43.8, 761, 11.0, 15.6, 242, 170 and 38.4 mg.kg-1, respectively. Since this study was a heavy metal analysis along the highway, evaluation of these elements with their potential hazards for ecology and human was briefly discussed. A strong relationship was observed between Pb concentration and the traffic density.
- MakaleYalnız künye2013Determination of Pb(II), Zn(II), Cd(II), and Co(II) ions by flame atomic absorption spectrometry in food and water samples after preconcentration by coprecipitation with Mo(VI)-diethyldithiocarbamate
Tufekci, Mehmet; Bulut, Volkan Numan; Elvan, Hamide; Ozdes, Duygu; Soylak, Mustafa; Duran, Celal
A new, simple, and rapid separation and preconcentration procedure, for determination of Pb(II), Cd(II), Zn(II), and Co(II) ions in environmental real samples, has been developed. The method is based on the combination of coprecipitation of analyte ions by the aid of the Mo(VI)-diethyldithiocarbamate- (Mo(VI)-DDTC) precipitate and flame atomic absorption spectrometric determinations. The effects of experimental conditions like pH of the aqueous solution, amounts of DDTC and Mo(VI), standing time, centrifugation rate and time, sample volume, etc. and also the influences of some foreign ions were investigated in detail on the quantitative recoveries of the analyte ions. The preconcentration factors were found to be 150 for Pb(II), Zn(II) and Co(II), and 200 for Cd(II) ions. The detection limits were in the range of 0.1-2.2 μg L-1 while the relative standard deviations were found to be lower than 5 % for the studied analyte ions. The accuracy of the method was checked by spiked/recovery tests and the analysis of certified reference material (CRM TMDW-500 Drinking Water). The procedure was successfully applied to seawater and stream water as liquid samples and baby food and dried eggplant as solid samples in order to determine the levels of Pb(II), Cd(II), Zn(II), and Co(II) ions.
- MakaleYalnız künye2013Cadmium and nickel determinations in some food and water samples by the combination of carrier element-free coprecipitation and flame atomic absorption spectrometry
Bahadir, Zekeriyya; Ozdes, Duygu; Bulut, Volkan Numan; Duran, Celal; Elvan, Hamide; Bektas, Hakan; Soylak, Mustafa
A procedure for separation and enrichment of Cd(II) and Ni(II) ions based upon carrier element-free coprecipitation by using an organic coprecipitant, 2-{4-[2-(1H-Indol-3-yl)ethyl]-3-(4-methylbenzyl)-5-oxo-4,5-dihydro-1H-1,2,4-triazol-1-yl}-N-(3-fluoro-phenylmethyliden) acetohydrazide, prior to their flame atomic absorption spectrometric detections has been developed. The effects of varied experimental conditions on the performance of the developed method such as pH, sample volume, amount of coprecipitating agent, etc. were evaluated in detail on the recovery of analyte ions, and the influences of some anions and cations were investigated. The limits of detection for Cd(II) and Ni(II) ions based on three times the standard deviation of the blanks (N: 10) were obtained as 0.70 g L-1 and 1.21 g L-1, respectively. The accuracy of the method was tested by analyzing a certified reference material and by spike tests. The method was applied to determine the levels of cadmium and nickel in stream and sea water, rice, red lentil, and wheat samples.
- MakaleAçık Erişim2012Optimization of a new cloud point extraction procedure for the selective determination of trace amounts of total iron in some environmental samples
Duran, Celal; Özdeş, Duygu; Çelenk Kaya, Elif; Kantekin, Halit; Bulut, Volkan Numan; Tüfekçi, Mehmet
A new, simple, and rapid cloud point extraction (CPE) procedure system, combined with flame atomic absorption spectrometry (FAAS), was developed for selective separation, preconcentration, and determination of trace amounts of total iron in some environmental samples. The complexing agent, N,N-(2,2 - (ethane-1,2-diylbis(oxy))bis(ethane-2,1-diyl))bis(2-chloroacetamide) (EDBOCA), is selective at pH 5.0 for only Fe(II) and Fe(III) ions in the presence of Cu(II), Pb(II), Cd(II), Mn(II), Co(II), Cr(III), Cr(VI), Ni(II), Zn(II), Al(III), Mo(VI), Pd(II), Pt(IV), Au(III), and V(V) ions. The procedure is based on the complexation of Fe(III) ions with EDBOCA reagent in the presence of Triton X-114 (TX-114) as a non-ionic surfactant. The optimum conditions for the CPE of Fe(III) ions were investigated with respect to several experimental parameters such as pH of the solution, TX-114 and EDBOCA concentrations, incubation time and temperature, and centrifugation rate and time. The detection limit for Fe(III) ions based on the 3 times the standard deviation of the blanks (N:10) was found to be 1.22 μg L ?1 , while the relative standard deviation (RSD) was 4.2%. Environment Canada TM-25.3 and CRM-SA-C Sandy Soil C, as certified reference materials, were used, and spike tests were applied to validate the method. The method was applied to some real environmental samples to evaluate their total iron levels.
- MakaleYalnız künye2011Preconcentration of Cd(II) and Cu(II) ions by coprecipitation without any carrier element in some food and water samples
Duran, Celal; Ozdes, Duygu; Sahin, Deniz; Bulut, Volkan Numan; Gundogdu, Ali; Soylak, Mustafa
A simple, rapid, sensitive and environmentally friendly separation and preconcentration procedure, based on the carrier element free coprecipitation (CEFC) of Cu(II) and Cd(II) ions by using an organic coprecipitant, 2-{[4-(4-fluorophenyl)-5-sulphanyl-4H-1,2,4-triazol-3-yl]methyl}-4-{[(4-fluorophenyl) methylene]amino}-5-(4-methylphenyl)-2,4-dihydro-3H-1,2,4-triazol-3-one (MEFMAT) was developed. The analyte ions were determined by flame atomic absorption spectrometric (FAAS) determinations. The optimum conditions for the coprecipitation process were investigated on several commonly tested experimental parameters such as pH of the solution, amount of MEFMAT, sample volume, standing time, centrifugation rate and time. The influences of some anions, cations and transition metals on the recoveries of analyte ions were also investigated, and no considerable interference was observed. The preconcentration factor was found to be 50. The detection limits for Cu(II) and Cd(II) ions based on the three times the standard deviation of the blanks (N:10) were found to be 1.49 and 0.45μgL-1, respectively. The relative standard deviations were found to be lower than 3.5% for both analyte ions. The method was validated by analyzing two certified reference materials (CRM-TMDW-500 Drinking Water and CRM-SA-C Sandy Soil C) and spike tests. The procedure was successfully applied to sea water and stream water as liquid samples and tobacco, hazelnut and black tea as solid samples.