Sürdürülebilir Kalkınma Amaçları
Yazarlar
Yayınlar
- MakaleAçık Erişim2018Sensitivity-Based Model Updating of Building Frames using Modal Test Data
Altunişik, Ahmet Can; Karahasan, Olguhan Şevket; Genç, Ali Fuat; Okur, Fatih Yesevi; Günaydin, Murat; Adanur, Süleyman
Model updating is of significant importance in the actual analyses of real structures. The differences between experimental and numerical dynamic characteristics can be minimized by means of this procedure. This procedure can be carried out using two approaches, namely, the manual model updating and the global or local automated model updating. The local model updating is a convenient tool for all kind of structures capable of minimizing the differences mentioned previously nearly to zero and also of identifying the damage locations and monitoring structural integrity. In this way, current realistic behavior of structures can be represented by updated finite element models. This paper describes a Reinforced Concrete (RC) frame model, its ambient vibration testing, finite element modeling and sensitivity-based automated model updating. The RC frame is of ½ geometric scale with two floors and two bays in the longitudinal direction. It was built and then subjected to ambient vibration tests to determine experimentally their dynamic characteristics. Additionally, the finite element computer program ANSYS was used to determine its initial numerical dynamic characteristics. The experimental and numerical results were compared resulting in maximum differences of 38.38% between them. To minimize these differences, the finite element model was updated using the global and local automated approach using a sensitivity-based analyses with some uncertain parameters. The differences were finally reduced to 4.4% and 0.21% by the global and the local automated model updatings, respectively. It is concluded that sensitivity-based automated updating is a very effective procedure to obtain the updated finite element model which can reflect the current behavior of a structure.
- MakaleYalnız künye2011Dynamic Characteristics of a Prototype Arch Dam
Sevim, B.; Bayraktar, A.; Altunışık, A.C.; Adanur, S.; Akköse, M.
This study determines the dynamic characteristics of a prototype arch dam-reservoir-foundation system using Operational Modal Analysis method. Achievement of this purpose involved construction of a prototype arch dam-reservoir-foundation system under laboratory conditions. Ambient vibration tests on the arch dam model identified its natural frequencies, mode shapes, and damping ratios. Natural excitations such as small impact loads vibrated to arch dam. Sensitivity accelerometers which were placed on the dam's crest collected signals in measurements. Measurements were recorded for empty and full reservoirs. Operational Modal Analysis software processed signals which were collected from the ambient vibration tests. Enhanced Frequency Domain Decomposition technique estimated dynamic characteristics of the dam. Results showed that there was an approximate 20-25% difference between natural frequencies related to empty and full reservoirs.
- MakaleYalnız künye2011Experimental and analytical system identification of Eynel arch type steel highway bridge
Altunişik, Ahmet Can; Bayraktar, Alemdar; Sevim, Bariş; Özdemir, Hasan
This paper describes a full scale arch type steel highway bridges, its finite element modelling and Operational Modal Analysis. Eynel Highway Bridge which has arch type structural system with a total length of 336 m and located in the AyvacIk county of Samsun, Turkey is selected as a case study. The bridge connects the villages which are separated with Suat Uǧurlu Dam Lake. The three dimensional finite element model is constructed using project drawings and an analytical modal analysis is then performed to generate natural frequencies and mode shapes in the three-orthogonal directions. The ambient vibration tests on the bridge deck under natural excitation such as traffic, human walking and wind loads are conducted using Operational Modal Analysis. Sensitive seismic accelerometers are used to collect signals obtained from the experimental tests. To obtain experimental dynamic characteristics, two output-only system identification methods are employed namely, Enhanced Frequency Domain Decomposition method in the frequency domain and Stochastic Subspace Identification method in time domain. The correlation between the finite element model and experimental results is studied. Good agreement is found between dynamic characteristics in the all measurement test setups performed on the bridge deck. It is demonstrated that the ambient vibration measurements using Enhanced Frequency Domain Decomposition and Stochastic Subspace Identification methods are enough to identify the most significant modes of steel highway bridges. It is seen that there are some differences between analytical and experimental natural frequencies and experimental natural frequencies are generally bigger than the others.
- MakaleYalnız künye2011Investigation of water length effects on the modal behavior of a prototype arch dam using operational and analytical modal analyses
Sevim, Bariş; Bayraktar, Alemdar; Can Altunişik, Ahmet
This study determines the water length effects on the modal behavior of a prototype arch dam using Operational and Analytical Modal Analyses. Achievement of this purpose involves construction of a prototype arch dam-reservoir- foundation model under laboratory conditions. In the model, reservoir length was taken to be as much as three times the dam height. To determine the experimental dynamic characteristics of the arch dam using Operational Modal Analysis, ambient vibration tests were implemented for empty reservoir and three different reservoir water lengths. In the ambient vibration tests, the dam was vibrated by natural excitations provided from small impact effects and the response signals were measured using sensitive accelerometers. Operational Modal Analysis software process signals collected from the ambient vibration tests, and Enhanced Frequency Domain Decomposition and Stochastic Subspace Identification techniques estimated modal parameters of the dams. To validate the experimental results, 3D finite element model of the prototype arch dam was modeled by ANSYS software for empty reservoir and three different reservoir water lengths, and dynamic characteristics of each model were determined analytically. At the end of the study, experimentally and analytically identified dynamic characteristics compared to each other. Also, changes on the natural frequencies along to water length are plotted as graphs. Results suggest that reservoir water complicates the modal behavior of the arch dam significantly.