Investigation of changes in geomechanical properties of sandstones under different saturation and anisotropy conditions: Example from Gümüşhane (NE Türkiye); [Farklı doygunluk ve anizotropi koşullarında kumtaşlarının jeomekanik özelliklerindeki değişimlerin incelenmesi: Gümüşhane örneği (KD Türkiye)]

gIn this study the changes in various geomechanical properties were studied for sandstones cropped out at the Mescitli region of the Gümüşhane city under different saturation and anisotropy conditions. For this purpose, 225 specimens were prepared considering the lamination planes of those were chosen to have orientation of 0, 30, 45, 60 and 90° relative to loading direction. Index properties of the sandstones such as dry unit weight (dryg), saturated unit weight (sat), water absorption by weight (Aw) and water absorption by volume (Av) were assigned. In accordance with the objective of study P wave velocity, uniaxial compressive strength and indirect tensile strength values were determined based on different saturation and anisotropy conditions. It was noted as a result of the observations carried out that specimens parallel to lamination have higher wave velocities in general when compared with specimens that are perpendicular to lamination planes. While uniaxial compressive strength values for sandstones are high for specimens which are parallel and perpendicular to lamination, the lowest strength value was observed in specimens with an anisotropy angle of 30°. In addition, it was also observed that the strength values decrease at a significant level with increasing saturation conditions. Strength anisotropy ratio (RUCS) for sandstones varies between 1.28–1.49 based on different saturation conditions. Similarly, while indirect tensile strength values were higher in specimens that were parallel and perpendicular to lamination, they were lower for other anisotropy orientations. Indirect tensile strength values also decreased with increasing degree of saturation.