Yayınlar
Koleksiyondaki öğeler
- MakaleAçık Erişim2016Scopus SJRQ1Utilization of stale bread in fried wheat chips: Response surface methodology study for the characterization of textural, morphologic, sensory, some physicochemical and chemical properties of wheat chips
Yuksel, Ferhat; Kayacier, Ahmed
Wheat chips enriched with stale bread were produced and response surface methodology was used for the studying the simultaneous effects of stale bread level (0-50 g/100g), frying temperature (170-190 °C) and frying time (40-60 s) on some physicochemical, chemical, textural, morphological and sensorial properties of chips. Additionally, product optimization was performed by using ridge analysis to detect the optimum levels of process variables. The dry matter, ash, Hunter Lab a and b values of samples increased with the increasing stale bread level. Higher frying temperature caused a decrease in the hardness and water activity values. Also, addition of stale bread in the formulation of chips decreased the oil uptake of samples significantly (p < 0.01). Sensory values of wheat chips increased with the increasing stale bread level. In general, panelists preferred wheat chips enriched with stale bread compared to control sample. The addition of stale bread made the structure of chips firm and electron microscopy analysis revealed that pores and fractures of chips decreased for the samples containing stale bread, which resulted in lower oil uptake during frying.
AtıfScopus24WoS18
İncele - MakaleAçık Erişim2015Scopus SJRQ3A low cost outdoor testing facility for detailed photovoltaic device performance characterization
Ogulgonen, Guvenc; Ozden, Talat; Yardim, Ugur; Turan, Rasit; Kincal, Serkan
Long term outdoor performance monitoring is the ultimate method to capture the long term performance characteristics of PV devices. As time consuming as this process might be, it is the only way in which the local environmental condition versus PV device characteristics may be captured when making investment decisions. This data needs to be captured at least once through the seasonal cycle. It needs to be correlated to the environmental conditions, this monitoring climatic conditions is a requirement. Solar irradiation conditions must be monitored over a range of inclination angles - direct, diffuse and reflected components must be ideally captured separately. The panels must be held at maximum power generating point through the varying illumination conditions. Periodic IV traces must be captured, in addition to the power output to understand mechanisms of degradation, if present. Furthermore, the IV curves must be summarized in terms of relevant performance metrics. This work describes an outdoor testing facility that addresses all the aforementioned requirements. Reliable equipment selections coupled with adequate modelling strategies allow for the generation of a robust and accessible database of performance data.
AtıfOpenAlex2İncele - MakaleAçık Erişim2016Scopus SJRQ4Comparison of immunoglobulin (IgG, IgM) concentrations in calves raised under organic and conventional conditions
Bayram, Bahri; Aksakal, Vecihi; Turan, Ibrahim; Demir, Selim; Mazlum, Halit; Çosar, Ikram
The objective of study was conducted on to compare immunoglobulin (Ig) concentrations in calves raised under organic and conventional conditions. 30 newborn Holstein Friesian calves (15 rose under organic and 15 under conventional conditions) in two dairy cattle farms. Blood samples were taken from 30 newborn calves at birth (before taking colostrum) and on 14th day to compare immunoglobulin (Ig) concentrations in calves raised under organic and conventional conditions. Furthermore, blood and colostrum samples were also taken from the mothers included into the study. IgG and IgM concentrations in colostrum and blood serums were determined using commercial ELISA kits. IgG concentrations at birth (0.79±0.34, 1.64±0.95 mg/mL) and on the 14th day (46.5±21.5, 70.5±27.8 mg/mL) in calves raised under organic conditions were lower than those raised under conventional conditions (p<0.01). Calves raised under organic conditions also had lower IgM concentrations than calves raised under conventional conditions at birth (0.23±0.03 and 0.28±0.11 mg/mL, respectively) and on the 14th day (2.76±0.56 and 4,30±1.03 mg/mL, respectively) (p<0.05, p<0.01). IgG concentrations in the blood serum of cows raised under conventional conditions were higher than those raised under organic conditions (p<0.01), while no difference was found with respect to IgM concentrations (p>0.05). No difference was found in the IgG and IgM concentrations of colostrum obtained from cows raised under organic and conventional conditions. In both the husbandry systems, positive and significant (p<0.01) correlations were found between the Ig concentrations of the mothers and offsprings. Consequently, it can be suggested that higher Ig concentrations in cattle raised under conventional conditions might be due to poorer environmental conditions.
AtıfScopus5WoS4OpenAlex9İncele - MakaleYalnız künye2019A STUDY ON THE CHARACTERISTICS OF GÜMÜŞHANE SEISMICITY: ANALYSES OF REGION-TIME PARAMETERS
Öztürk, Serkan; Kaya, Aynur
The proposed study is focused on the identification of region-time characteristics of earthquakes in Gümüşhane, Turkey. Detailed statistical evaluations were achieved by considering the most frequently used size-scaling parameters such as seismotectonic b-value, fractal dimension Dc-value, standard normal deviate Z-value and recurrence time of earthquakes. Used earthquake catalog is homogeneous for duration magnitude, Md, and consists of 2902 shallow earthquakes with 1.0≤Md≤6.5 in about 47.76-years period between 1970 and middle of 2018. b-value is computed as 1.02±0.02 with a completeness level of 2.8, and this result indicates that frequency-magnitude distribution of seismicity in Gümüşhane is well represented with a b-value typically close to 1.0. Dc-value is calculated as 1.57±0.03 with a scale invariance between 4.96 and 86.28 km. This Dc-value means that seismic activity is more clustered in smaller areas or at larger scales in Gümüşhane. The analysis on the recurrence times of earthquakes implies that Gümüşhane has not a significant earthquake potential for the great earthquakes. Regional variation of b-value shows that small bvalues were observed in and around Kelkit and Köse, and these regions may have a possible earthquake hazard and risk in the future. Z-value analysis suggests that there are not noticeable seismicity rate changes in the mid-2018. These statistical results indicate that the seismic hazard is low and seismic risk is minor in the intermediate term in Gümüşhane.
AtıfScopus3WoS2İncele - MakaleAçık Erişim2016Scopus SJRQ2Antioxidant activity of taxifolin: An activity-structure relationship
Topal, Fevzi; Nar, Meryem; Gocer, Hulya; Kalin, Pinar; Kocyigit, Umit M.; Gülçin, Ilhami; Alwasel, Saleh H.
Taxifolin is a kind of flavanonol, whose biological ability. The objectives of this study were to investigate the antioxidants and antiradical activities of taxifolin by using different in vitro bioanalytical antioxidant methods including DMPD•+, ABTS•+, and DPPH•-scavenging effects, the total antioxidant influence, reducing capabilities, and Fe2+-chelating activities. Taxifolin demonstrated 81.02% inhibition of linoleic acid emulsion peroxidation at 30 μg/mL concentration. At the same concentration, standard antioxidants including trolox, α-tocopherol, BHT, and BHA exhibited inhibitions of linoleic acid emulsion as 88.57, 73.88, 94.29, and 90.12%, respectively. Also, taxifolin exhibited effective DMPD•+, ABTS•+, and DPPH•-scavenging effects, reducing capabilities, and Fe2+-chelating effects. The results obtained from this study clearly showed that taxifolin had marked antioxidant, reducing ability, radical scavenging and metal-chelating activities. Also, this study exhibits a scientific shore for the significant antioxidant activity of taxifolin and its structure-activity insight.
AtıfScopus290WoS255OpenAlex306
İncele - Derleme MakaleAçık Erişim2019Scopus SJRQ4A Review Study on the Using of Diethyl Ether in Diesel Engines: Effects on CO2 Emissions
Sezer, İsmet
Vehicle and other fuel combustion emissions can change the composition of the atmosphere, increasing its ability to trap heat. Gases that are effective in trapping heat are called greenhouse gases and include all of the gases in vehicle emissions. The major component of greenhouse gases emissions is carbon dioxide (CO2). Reduction of CO2 emissions has become a concern worldwide. Introduction of biofuels to fueling of automotive engines is the one method to decrease emissions of greenhouse gases. The CO2 from biofuels, is emitted during combustion and absorbed during growth of tree end plants. These biofuels can be applied as blends or sole fuels. The most researches declare that the best way to reduce greenhouse emissions is the use of various biofuels. Therefore, it is very important that the results of various studies on alternative fuels or fuel additives are evaluated together to practice applications. On the other hand, diesel cars are also helping to reduce CO2 emissions. For these reasons, this study especially focuses on the use diethyl ether in diesel engines as fuel or fuel additive in various diesel engine fuels. This review study investigates the effects of diethyl ether addition on the CO2 emissions.
AtıfScopus5WoS7OpenAlex7TR Dizin2
İncele - MakaleYalnız künye2017Scopus SJRQ1Environmental impact of Gümüşhane City, Turkey, waste area in terms of heavy metal pollution
Vural, Alaaddin; Gundogdu, Ali; Akpinar, Ibrahim; Baltaci, Cemalettin
The aim of this study is to investigate the occurrence of a heavy metal contamination in a solid waste site of Gümüşhane City, Turkey, to examine the dimensions of the risk of contamination, and to present suggestions for possible solutions. For this purpose, heavy metal contents of soil and leachate samples taken from a Gümüşhane waste site were determined by a new method, microwave plasma-atomic emission spectrometry (MP-AES). When the obtained results are compared with background and control values, it can be seen that the region carries contamination risks, especially in terms of heavy metals such as Zn, Cd, Pb, Cu, Ni, and Co. To examine the environmental effects of the landfill area in more detail, geodeposition index (Igeo), enrichment factor (EF), contamination index (PI), and combined contamination index (IPI) parameters are used. In addition, the samples taken from an area supposed to be free of pollution risk were also analyzed as control samples, and the obtained data were statistically compared with the results of the waste area. It is determined that the results of landfill waste site are dissimilar to those of comparison samples in terms of investigated metals, and that they contained higher values in general.
AtıfScopus19WoS16OpenAlex21İncele - MakaleYalnız künye2016Scopus SJRQ1Investigation of structural and tribological properties of electroless Ni-B coated pure titanium
Çelik, Ilhan; Karakan, Mehmet; Bülbül, Ferhat
In the present study, the surface of commercial pure (Grade 2) titanium was coated with electroless Ni-B and, then, it was subjected to heat treatment for an hour at 400°. The surface morphology, microstructure and phase identification were analysed by X-ray diffraction and scanning electron microscope. Wear behaviour characterisation was carried out using a ball-on-disc tribometer. The results of the analyses showed that the electroless Ni-B coating had a significantly amorphous structure in the as-deposited condition. It was also determined that the coating structure crystallised after the heat treatment and wear resistance of pure titanium increased after electroless Ni-B coating. Particularly, upon the heat treatment, it was observed that wear resistance and surface hardness of pure titanium considerably increased.
AtıfScopus50WoS42OpenAlex41İncele - MakaleAçık Erişim2018Investigating the relationship between sprint and jump performances with velocity and power parameters during propulsive phase of the loaded-squat jump exercise
Can, İbrahim
The purpose of this study was to investigate the relationship between sprint and jump performance with velocity parameters in the loaded-squat jump exercise (SQ Loaded ). In accordance with this purpose, a total of 13 athletes competing in martial sports have participated in this study voluntarily. In this study, sprint tests, vertical jump (VJ), standing long jump (SLJ) tests and one repetition maximal strength test were applied. In order to determine velocity and power parameters, SQ Loaded exercise was applied by using an external load that corresponds to 40% of body weights of the subjects via an isoinertial velocity transducer (T-Force dynamic measurement system) and values of mean propulsive velocity (MPV), peak velocity (PV), mean propulsive power (MPP) and peak power (PP) were obtained. Descriptive statistics, Spearman correlation analysis and Shapiro-Wilk normality tests were used for data assessment. It has been concluded that there is no statistically significant relation between 10, 20 and 30 meter sprint times and the values of MPV (r=-,332; r=-,375; r=-,446; p>.05 respectively), PV (r=-,058; r=-,118; r=-,165; p>.05 respectively), MPP (r=-,285; r=-,482; r=-,485; p>.05 respectively) and PP (r=-,205; r=-,512; r=-,391; p>.05 respectively) during SQ Loaded exercise. In addition, while no statistically significant relation has been obtained between the VJ and SLJ values of the participants and MPV (r=,496; r =,429; p>.05 respectively) and PV (r=,300; r=,223; p>.05 respectively) values during propulsive stage of SQ Loaded exercise, it has been ascertained that there is a statistically positive and significant relation between the values of MPP(r=,620; r=,580; p>.05 respectively) and PP (r=,678; r=,572; p<.05 respectively). In conclusion, it can be suggested that lifting velocity and power values don’t have a positive effect on short sprint performance; however power values affect the vertical jump and standing long jump performances positively.
AtıfScopus2OpenAlex2İncele - MakaleAçık Erişim2018Scopus SJRQ4Mineral chemistry, whole-rock geochemistry and petrology of Eocene I-type shoshonitic plutons in the Gölköy area (Ordu, NE Turkey)
Temizel, Irfan; Abdioǧlu Yazar, Emel; Arslan, Mehmet; Kaygusuz, Abdullah; Aslan, Zafer
The Eocene intermediate to felsic plutons are widespread in varying sizes and compositions throughout the Eastern Pontides Orogenic Belt in NE Turkey. Of these, two monzonitic bodies (namely the Eriko Tepe and Göl Tepe Plutons) in the Gölköy (Ordu) area, extend nearly in the orientation of NWSE and E-W and were emplaced into the Upper Cretaceous and/or Eocene volcanic and sedimentary rocks. Petrographically, the studied monzonitic plutons are compositionally fine to medium grained monzonite, monzodiorite and subordinate quartz-monzonite. They consist of plagioclase (An35-67), K-feldspar (Or61-96), quartz, clinopyroxene (Wo28-49En35-51Fs10-25), biotite (Mg#: 0.53-0.73) ± hornblende (Mg#: 0.65-0.82), Fe-Ti oxide with monzonitic, poikilitic, perthitic, rare antirapakivi and graphic textures. Mineral thermobarometer estimations imply that the plutons were crystallized in P-T conditions of mid to shallow crustal levels. Petrochemically, these monzonitic plutons show post-collisional, I-type, metaluminous (A/CNK=0.76-0.93) and shoshonitic features. The wholerock major oxide and trace element variations suggest that fractionational crystallization played a significant role in the evolution of these monzonitic plutons. The primitive mantle-normalized trace element patterns of the studied plutons are similar to each other with enrichment in large ion lithophile elements, Th, Ce and negative Nb and Ti anomalies. Moreover, the chondrite-normalized rare earth element plots of the plutons show moderately enriched concave-shaped patterns (LaN/LuN=9.3-12.6) with negative Eu anomalies (EuN/Eu∗=0.69-0.84), all of which imply plagioclase and clinopyroxene ± hornblende fractionations during their evolution. The geochemical data suggest that the monzonitic plutons have evolved from parental magmas derived from the melts of enriched lithospheric mantle, in a post-collisional setting.
AtıfScopus15WoS14OpenAlex14TR Dizin5İncele - MakaleYalnız künye2014Scopus SJRQ3An investigatio n of the antioxidant activities and some physicochemical characteristics of strawberr y added yogurt
Engül, M.S.; Erkaya, T.; Yildiz, H.
The effect of adding strawberry pulp to yogurt on its physicochemical properties, antioxidant activity and sensory characteristics was studied. For this purpose, experimental yogurts were produced by the addition of strawberry pulp (at 8, 12 and 16%) to plain yogurt and analyses were carried out through 14 days of cold storage. The titratable acidity and viscosity values of yogurts increased with the increasing of strawberry pulp concentration. Conversely, the total solid, fat, protein, ash, pH and syneresis values decreased. Antioxidant activity (β-caroten bleaching assay) and IC50 (DPPH radical scavenging assay) in yogurts ranged from 77.71 to 86.12%, 205.70 to 2241.09 μg /mL during storage, respectively. For the sensory properties of yogurts, yogurt including 16% of strawberry pulp received the highest overall acceptability score on the first day of storage.
AtıfScopus10WoS8İncele - MakaleYalnız künye2019Scopus SJRQ1Valorisation of fruit by-products: Production characterization of pectins from fruit peels
Güzel, Melih; Akpınar, Özlem
The aim of the study is to determine the physical, chemical, structural and thermal properties of the pectins obtained from melon rinds, kiwifruit and pomeganate peels and compared with the pectins obtained from apple and orange peel used in the commercial pectin production process. Pectins extractions from these wastes were performed with citric acid, at 80 °C and 60 min. All pectins, extracted, were found to be high methoxyl pectines. The water holding capacity of the melon rind, kiwifruit and pomegranate peels pectins were lower than the orange and apple peel pectins while the thermal stability of the kiwifruit peel pectin was close to the apple and orange peel pectins. The morphological structures of the extracted pectins showed that they had micro-fractures and hollow openings. The crystallinity of the melon rinds, kiwifruit and pomegranate peel pectins were smilar to orange peel pectin. The result of this study showed that the kiwifruit peel had advantages in terms of commercial pectin production due to its high pectin yield, water holding capacity, esterification degree and thermal stability.
AtıfScopus207WoS180OpenAlex224İncele - MakaleYalnız künye2019Scopus SJRQ2Effects of Kefir on Quality of Life and Sleep Disturbances in Postmenopausal Women
Özcan, Handan; Oskay, Ümran; Bodur, Ali Fuat
The aim of this study is to identify the effects of kefir, an alternative treatment method, on quality of life and sleep disturbances in postmenopausal women. In this study, it is seen that kefir has positive effects on sleep disturbances, depression, and quality of life in postmenopausal women.
AtıfScopus19WoS17OpenAlex22İncele - MakaleAçık Erişim2017Scopus SJRQ2Bounds for the radii of univalence of some special functions
Aktaş, Ibrahim; Baricz, Árpád; Yaǧmur, Nihat
Tight lower and upper bounds for the radii of univalence (and starlikeness) of some normalized Bessel, Struve and Lommel functions of the first kind are obtained via Euler-Rayleigh inequalities. It is shown also that the radius of univalence of the Struve functions is greater than the corresponding radius of univalence of Bessel functions. Moreover, by using the idea of Kreyszig and Todd, and Wilf it is proved that the radii of univalence of some normalized Struve and Lommel functions are exactly the radii of starlikeness of the same functions, and they are actually solutions of some functional equations. The Laguerre-Pólya class of entire functions plays an important role in our study.
AtıfScopus35WoS34OpenAlex22İncele - MakaleYalnız künye2018Scopus SJRQ3Automatic Building Extraction from Image and LiDAR Data with Active Contour Segmentation
Akbulut, Zeynep; Özdemir, Samed; Acar, Hayrettin; Karsli, Fevzi
Automatic building extraction is an important topic for many applications such as urban planning, disaster management, 3D building modeling and updating GIS databases. Its approaches mainly depend on two data sources: light detection and ranging (LiDAR) point cloud and aerial imagery both of which have advantages and disadvantages of their own. In this study, in order to benefit from the advantages of each data sources, LiDAR and image data combined together. And then, the building boundaries were extracted with the automated active contour algorithm implemented in MATLAB. Active contour algorithm uses initial contour positions to segment an object in the image. Initial contour positions were detected without user interaction by a series of image enhancements, band ratio and morphological operations. Four test areas with varying building and background levels of detail were selected from ISPRS’s benchmark Vaihingen and Istanbul datasets. Vegetation and shadows were removed from all the datasets by band ratio to improve segmentation quality. Subsequently, LiDAR point cloud data was converted to raster format and added to the aerial imagery as an extra band. Resulting merged image and initial contour positions were given to the active contour algorithm to extract building boundaries. In order to compare the contribution of LiDAR to the proposed method, the boundaries of the buildings were extracted from the input image before and after adding LiDAR data to the image as a layer. Finally extracted building boundaries were smoothed by the Awrangjeb (Int J Remote Sen 37(3): 551–579. https://doi.org/10.1080/01431161.2015.1131868, 2016) boundary regularization algorithm. Correctness (Corr), completeness (Comp) and accuracy (Q) metrics were used to assess accuracy of segmented building boundaries by comparing extracted building boundaries with manually digitized building boundaries. Proposed approach shows the promising results with over 93% correctness, 92% completeness and 89% quality.
AtıfScopus16WoS15OpenAlex16İncele - MakaleYalnız künye2019Scopus SJRQ2TLD characteristic of glass, feldspathic and lithium disilicate ceramics
Isik, Esme; Toktamis, Huseyin
Thermoluminescence (TL) emission of dental ceramics could be potentially used for retrospective dosimetry purposes as this allows a quick and reliable dose assessment in case of nuclear accident or bad use of a nuclear attack. This paper reports on the chemical and luminescence characterization of glass, feldspathic and lithium disilicate glass ceramic (LS2). Swedish and Turkish dental ceramics supplied by Vivadent Ivoclar considering: (i) the dose response in the range 10 Gy to 6.9 kGy which displays a linear dose−response at low dose values up to 36 Gy (glass and feldspathic ceramics) and shows sublinear behavior from 12 Gy to 6 kGy (lithium disilicate glass ceramics), (ii) a reproducibility of the TL signal in which the area under the glow curve increased about 25% after 10 cycles for glass and lithium disilicate ceramics and increased about 30% after seven cycles for feldspathic ceramics, (iii) stability of the luminescence emission with the elapsed time and (iv) effect of the heating rate. Glass, lithium disilicate and feldspathic ceramics display a complex UV-blue glow emission that can be respectively fitted to five and four groups of components assuming first-order kinetics behavior.
AtıfScopus5WoS4İncele - MakaleYalnız künye2015Scopus SJRQ2Equilibrium, kinetics, and thermodynamic evaluation of mercury (II) removal from aqueous solutions by moss (Homalothecium sericeum) biomass
Ozdes, Duygu; Duran, Celal
In the present research, Homalothecium Sericeum was utilized for the first time as an effective and readily available adsorbent in removal of Hg(II) ions from aqueous solutions through a batch adsorption technique. The effects of initial solution pH, contact time, initial Hg(II) and adsorbent concentration, temperature, and ionic strengths were evaluated on the removal efficiency of Hg(II) ions, after being characterized of H. sericeum by different techniques. The maximum Hg(II) adsorption was obtained as 128.2 mg g-1 at initial pH 6.0 with an equilibrium time of 60 min, adsorbent dosage of 5.0 g L-1 and initial Hg(II) concentration range of 50-750 mg L-1. The adsorption behaviors of Hg(II) ions onto H. sericeum were investigated in terms of kinetics (pseudo-first order, pseudo-second order, and intraparticle diffusion models), isotherms (Langmuir, Freundlich, and Dubinin Radushkevich models), and thermodynamics evaluation. Both the Langmuir and Freundlich isotherm models were found to be suitable to describe the adsorption equilibrium while the adsorption kinetics followed by the pseudo-second order model. Thermodynamic parameters including the Gibbs free energy (ΔG), enthalpy (ΔH), and entropy (ΔS) changes indicated that the adsorption of Hg(II) ions onto H. sericeum was feasible, spontaneous, and endothermic in nature.
AtıfScopus8WoS8OpenAlex8İncele - MakaleAçık Erişim2016Scopus SJRQ1Subduction-related Late Cretaceous high-K volcanism in the Central Pontides orogenic belt: constraints on geodynamic implications
Aydınçakır, Emre
Mineral chemistry, major and trace elements, 40Ar/39Ar age and Sr–Nd–Pb isotopic data are presented for the Late Cretaceous Hamsilos volcanic rocks in the Central Pontides, Turkey. The Hamsilos volcanic rocks mainly consist of basalt, andesite and associated pyroclastics (volcanic breccia, vitric tuff and crystal tuff). They display shoshonitic and high-K calc-alkaline affinities. The shoshonitic rocks contain plagioclase, clinopyroxene, alkali feldspar, phlogopite, analcime, sanidine, olivine, apatite and titanomagnetite, whereas the high-K calc-alkaline rocks contain plagioclase, clinopyroxene, orthopyroxene, magnetite / titanomagnetite in microgranular porphyritic, hyalo-microlitic porphyritic and glomeroporphyritic matrix. Mineral chemistry data reveal that the pressure condition of the clinopyroxene crystallisation for the shoshonitic rocks are between 1.4 and 6.3 kbar corresponds to 6–18-km depth and the high-K calc-alkaline rocks are between 5 and 12 km. 40Ar/39Ar age data changing between 72 ± .5 Ma and 79.0 ± .3 Ma (Campanian) were determined for the Late Cretaceous Hamsilos volcanic rocks, contemporaneous with the subduction of the Neo-Tethyan Ocean beneath the Pontides. The studied volcanic rocks were enriched in the large-ion lithophile and light rare earth element contents, with pronounced depletion in the contents of high-field-strength elements. Chondrite-normalised rare earth element patterns (LaN/LuN = 6–17) show low to medium enrichment, indicating similar sources of the rock suite. Initial 87Sr/86Sr values vary between.70615 and.70796, whereas initial 143Nd/144Nd values change between.51228 and.51249. Initial 206Pb/204Pb values vary between 18.001 and 18.349, 207Pb/204Pb values between 15.611 and 15.629 and 208Pb/204Pb values between 37.839 and 38.427. The main solidification processes involved in the evolution of the volcanic rocks consist of fractional crystallisation, with minor amounts of crustal contamination ± magma mixing. According to geochemical evidence, the shoshonitic melts in the Hamsilos volcanic rocks were possibly derived from the low degree of partial melting of a subcontinental lithospheric mantle (SCLM), while the high-K calc-alkaline melts were derived from relatively high degree of partial melting of SCLM that was enriched by fluids and/or sediments from a subduction of oceanic crust.
AtıfScopus26WoS20OpenAlex27İncele - MakaleYalnız künye2017Scopus SJRQ2Series tuned mass dampers in train-induced vibration control of railway bridges
Kahya, Volkan; Araz, Onur
This paper presents the series multiple tuned mass dampers (STMDs) to suppress the resonant vibrations of railway bridges under the passage of high-speed trains (HSTs). A STMD device consisting of two spring-mass-damper units connected each other in series is installed on the bridge. In solution, bridge is modeled as a simply-supported Euler-Bernoulli beam with constant cross-section, and vehicle is simulated as a series of moving forces with constant speed. By the assumed mode method, the governing equations of motion of the beam-TMD device coupled system traversed by a moving train are obtained. The optimum values for the parameters of the STMD device are obtained for the criterion based on the minimization of the maximum dynamic displacement of the beam at its midspan. Single TMD and multiple TMDs in parallel are also considered for demonstration of the STMD device's performance. The results show that STMDs are effective in bridge vibration suppression and robust to parameters' change in the main system and the absorber itself.
AtıfScopus27WoS24İncele - MakaleAçık Erişim2018Scopus SJRQ3A nutritional evaluation of the berry of a new grape: 'Karaerik' (Vitis vinifera L.)
Kurt, Aynur; Colak, Nesrin; Bengu, Aydin Sükrü; Gundoğdu, Ali; Akpinar, Erdal; Hayirlioglu-Ayaz, Sema; Ayaz, Faik Ahmet
Grape berries are a good source of nutrients and nutraceuticals and have many benefits for human health. Growing interest in the export potential and consumption of a new grape (cv. Karaerik), cultivated as a table grape in Turkey, encouraged us to profile its major nutrient contents from six different locations. Due to its popularity, the nutritional value of this grape berry needs to be investigated to ascertain its potential economic and health benefits. The most abundant sugars in the grape berry were fructose and glucose (peel/whole fruit; averages 236.57 and 127.87, and 183.36 and 108.60 g kg -1 fresh weight, respectively), while the major organic acids were tartaric and malic acids (7.17 and 2.81, and 2.61 and 1.76 g kg -1 fresh weight, respectively). Linoleic acid (peel/whole fruit/seed; 37.14, 33.12 and 57.83%, respectively) was the predominant fatty acid, while potassium (peel/whole fruit/seed; 9331.5, 10226.33 and 5354 μg/g dry weight, respectively) was the predominant mineral, followed by phosphorus (1592.8, 2672 and 3072.67) in the berry. Our results demonstrate that the nutrient components and physicochemical parameters varied significantly among the sampling locations. The grape berry contains considerable quantities of potentially beneficial healthy nutrients worthy of further evaluation.
AtıfScopus7İncele
