Yayınlar
Koleksiyondaki öğeler
- MakaleYalnız künye2011Scopus SJRQ2Calc-alkaline I-type plutons in the eastern Pontides, NE Turkey: U-Pb zircon ages, geochemical and Sr-Nd isotopic compositions
Kaygusuz, Abdullah; Şen, Cüneyt
The Köprübaşi{dotless} intrusion from the eastern Pontides of NE Turkey consists of granodiorite and monzogranite, and contains a number of mafic microgranular enclaves (MMEs). We report here U-Pb zircon age, geochemical and Sr-Nd isotopic data for these rocks in order to determining magma sources and magma production processes. On the basis of U-Pb zircon sensitive high-resolution ion microprobe dating (SHRIMP), the magma emplacement age of the granodiorite is 79.3±1.4Ma. The rocks of the pluton are calc-alkaline, metaluminous to peraluminous characteristics, and display features of I-type granites. They are enriched in large ion lithophile elements (LILE) and light rare earth elements (LREE) with negative Eu anomalies (Eu/Eu*=0.60-0.76), but are depleted in high field strength elements (HFSE). They have small range of 87Sr/86Sr(i) (0.7067-0.7070) and e{open}Nd(i) (-3.2 to -4.4) values. Fractionation of plagioclase, hornblende and Fe-Ti oxides played an important role in the evolution of the Köprübaşi{dotless} intrusion. A relatively shallow intrusion depth (∼2-8km) was estimated from the Al-in-hornblende geobarometry. All these characteristics, combined with the low values of K2O/Na2O, SiO2, Al2O3/(FeOT+MgO+TiO2) and (Na2O+K2O)/(FeOT+MgO+TiO2), suggest an origin by dehydration melting from a metabasaltic lower crustal source.
AtıfScopus39WoS36OpenAlex45
İncele - MakaleYalnız künye2015Scopus SJRQ2Stochastic seismic analysis of Kömürhan Highway Bridge with varying material properties
Çavdar, Özlem; Bayraktar, Alemdar; Altunışık, Ahmet Can
Stochastic seismic finite element analyses of the Kömürhan Bridge, the material properties of which are described by random fields, are presented in this paper. The stochastic perturbation technique and Monte Carlo simulation (MCS) method are used in the analyses. A summary of MCS and perturbation-based stochastic finite element dynamic analysis formulation of the structural system is given. The Kömürhan Bridge, located on the 51st km of Elazığ-Malatya highway in the east of Turkey, was chosen as a numerical example. The Erzincan earthquake in 1992 was considered a ground motion, since it took place in the vicinity of the bridge. The material properties were considered to be random variables. During the stochastic analysis, displacements and internal forces of the bridge under consideration were obtained using the perturbation-based stochastic finite element method (SFEM), as well as the MCS method. The selected random variables were elastic modulus and mass density. The efficiency and accuracy of the proposed SFEM algorithm were validated through comparison with results of the MCS method.
AtıfScopus8WoS6OpenAlex7İncele - MakaleYalnız künye2013Scopus SJRQ2Separation and pre-concentration of palladium(II) from environmental and industrial samples by formation of a derivative of 1,2,4-triazole complex on Amberlite XAD-2010 resin
Serencam, Huseyin; Bulut, Volkan Numan; Tufekci, Mehmet; Gundogdu, Ali; Duran, Celal; Hamza, Sibel; Soylak, Mustafa
A simple separation/pre-concentration method was developed for extraction of Pd(II) in various environmental samples, based on its adsorption of 4-phenyl-5-{[(4-phenyl-5-pyridin-4-yl-4H-1,2,4-triazole-3-yl)thio]methyl}-4H-1,2,4-triazole-3-thyol (PPTTMET) complex on Amberlite XAD-2010 resin in a mini column. The ligand has high affinity for Pd(II) among many other metals that are taken into consideration. The flame atomic absorption spectrometry is employed to determine the concentration of Pd(II). The optimum working conditions which were determined are as follows: 0.05 mol L-1 HNO3 as working medium, 1.0 mol L-1 HCI in acetone as elution solvent, 0.75 mg of PPTTMET amount and 750 mL of sample volume. The system was independent from the flow rates between 3.1 and 23.1 mL min-1. The Pd(II) adsorption capacity of Amberlite XAD-2010 resin was found to be 12.8 mg g-1 and the enrichment factor was calculated as 375. The method was successfully applied for the determination of Pd(II) in motorway dust samples, anodic sludge, gold ore, industrial electronic waste materials and various water samples.
AtıfScopus17WoS15OpenAlex17İncele - MakaleYalnız künye2012Scopus SJRQ1A study on the effects of high temperature on mechanical properties of fiber reinforced cementitious composites
Çavdar, Ahmet
The flexural strength and ductility properties of cementitious composites (mortar) under high temperature may be significantly improved by incorporating different types of fibers. In this study, four different types of fibers are added to cement mortars with the aim to investigate their mechanical contributions to mortars under high temperature, comparatively. Polypropylene (PP), carbon (CF), glass (GF) and polyvinyl alcohol (PVA) fibers are chosen for research. These fibers are added into mortars in five different ratios (0.0%, 0.5%, 1.0%, 1.50% and 2.0%) by volume. The mortars are subjected to the following temperatures: 21°C (normal conditions), 100°C (oven dry), 450°C and 650°C. The mechanical properties investigated are flexural strength, deflection and compressive strength of the cement mortars. In addition, thin sections of mortars are investigated to obtain changes in mortar because of high temperature. It is concluded that all fiber types contribute to the flexural strengths of mortars under high temperature. However, this contribution decreases with an increase in temperature. The samples with PVA show the best flexural performance (75-150%) under high temperature. CF which does not melt under high temperature also gives high flexural strength (11-85%). The compressive strengths of the mortars reduce under high temperature or with fiber addition. The highest increase in flexural strength and the lowest decrease in compressive strength is at 0.5-1.5% for CF if all temperature conditions are taken into consideration. The optimum fiber addition ratios of the samples containing PP and GF are 0.5% by volume. And for PVA, it is between 0.5% and 1.5% by volume.
AtıfScopus173WoS152OpenAlex178İncele - MakaleYalnız künye2013Scopus SJRQ2Biosorption properties of Morus alba L. for Cd (II) ions removal from aqueous solutions
Serencam, Huseyin; Ozdes, Duygu; Duran, Celal; Tufekci, Mehmet
The abundantly available industrial waste product Morus alba L. pomace (MAP) is one of the cost-effective biosorbent for removal of metal ions from aqueous solutions. Hence, in the present study, we aimed to test the ability of MAP to remove Cd(II) ions through batch biosorption process. Firstly, MAP was characterized using several techniques, and then the influence of various experimental parameters such as initial pH of the aqueous solution, initial Cd(II) concentration, contact time, MAP concentration, and temperature were evaluated upon the biosorption process. It was found that the maximum uptake of Cd(II) ions occurred at initial pH 6.0 and optimum contact time was observed as 60 min. Cd(II) ions adsorption on MAP analyzed by the Langmuir and Freundlich isotherm models and the maximum monolayer biosorption capacity of MAP was found to be 21.69 mg g-1 by using the Langmuir isotherm model. The pseudo-first-order, pseudo-second-order, Elovich, and intraparticle diffusion models were employed to describe the biosorption kinetics. In order to investigate the thermodynamic properties of the biosorption process, the changes in the Gibbs free energy (â̂†G), enthalpy (â̂†H), and entropy (â̂†S) were also evaluated and it has been concluded that the process was feasible, spontaneous, and endothermic in the temperature range of 5-40 C.
AtıfScopus38WoS36OpenAlex46
İncele - BildiriYalnız künye2012Designing a load agent for power management with a multi-agent home automation system
Özden, Talat; Okumuş, Halil Ibrahim
In this study, a load agent design is performed for the power management which lets us use existing electrical energy for consumer's needs, comfort and criteria in the areas such as flats and commercial buildings that independently meet their energy need from renewable energy sources. The load agent is designed on the basis of radio-frequency communication so it is a wireless communication system which also has the ability of switching off or making power flow by measuring current of the load. The agent has a flexible structure in order to be compatible with all ambient equipments. It can work with all equipments on the system properly, without any hardware changing. And this is shown in the paper.
AtıfScopus3OpenAlex2İncele - MakaleYalnız künye2013Scopus SJRQ3The effect of water stress on spikelet position weight variation in wheat
Yildirim, Mustafa
This study was conducted in Eskisehir during the 2004-05 and 2005-06 growing seasons, and aimed to evaluate the response of six bread wheat varieties to rainfed and irrigated conditions in terms of grain yield, heading date, plant height and position weight variation (PWV). Of the six varieties tested, three (Sultan, Yildiz, Bezostaja) are drought-sensitive cultivars and three (Gerek, Altay, Sonmez) are drought-tolerant cultivars. Spikes from each variety were divided into five spikelet groups in order to study the effect of spikelet position upon grain weight (S1, S2, S3, S4 and S5, with S1 the spikelet closest to the base). This study focused on position weight variation (PWV) in order to better understand how 1000-kernel weight is affected by spikelet position under both rainfed and irrigated conditions and thus gains a better understanding of wheat resistance to drought. Linear increases in grain yield, heading date and plant height were observed in response to irrigated conditions, whereas a linear increase in PWV was observed in response to rainfed conditions for both seasons. Grain yield was negatively associated with heading date (r=-0.746). PWV was positively associated with grain yield and negatively associated with heading date (p<0.01; r=0.804 and r=-0.860, respectively). The observed differences in grain weight between spikelet positions have important implications for drought tolerance in wheat and can be used as a new parameter for predicting drought tolerance.
AtıfScopus2WoS2
İncele - MakaleYalnız künye2010Scopus SJRQ3Non-genetic factors affecting milk and reproductive traits of Swedish Red and White cattle raised organically in Turkey
Aksakal, Vecihi; Yanar, Mete; Bayram, Bahri
The data on breeding and performance records of Swedish Red and White (SRW) cows kept in a private organic dairy farm in Kelkit, Turkey, during the period from 2006 through 2009 were used to study the effect of some non-genetic factors such as calving year, calving season, parity, age of dam and sex of calf on the various milk and reproductive traits. The actual lactation milk yield, daily milk yield, peak daily milk, days to attain milk yield and lactation length averaged as 5887.2±94.9 kg, 19.9±0.3 kg, 31.5±0.3 kg, 79.4±2.7 days and 302.5±3.2 days, respectively. The actual lactation milk yield, days to attain peak milk yield and lactation length were significantly affected by calving year and calving season. The effect of the parity on the daily milk yield, peak daily milk yield and days to attain peak milk yield were significant (P<0.01). The least squares means for calving interval and gestation length were 380.2±4.3 days and 275.4±0.6 days, respectively. Age of dam and calving season significantly (P<0.01) affected the days open. Mean age at first calving of SRW cows raised organically was 26.4±0.2 months and was significantly affected by the calving years. Significant (P<0.01) and positive phenotypic correlations of the actual lactation milk yield with daily milk yield (r = 0.71), peak milk yield (r = 0.53), lactation length (r = 0.53), days open (r = 0.43), calving interval (r = 0.36) and days attain to peak milk yield (r = 0.14) (P<0.05) were determined. In conclusion, the significant effects of environmental variables must be taken into consideration when developing and comparing models to be used in adjusting data to provide the best estimates of genetic values and parameters in evaluation of SRW cattle reared organically in Turkey.
AtıfScopus3WoS2İncele - MakaleYalnız künye2013Scopus SJRQ1Petrogenesis of the post-collisional volcanic rocks from the Borçka (Artvin) area: Implications for the evolution of the Eocene magmatism in the Eastern Pontides (NE Turkey)
Aydinçakir, Emre; Sen, Cüneyt
Whole-rock geochemistry, 40Ar-39Ar data, and Sr-Nd isotopes are presented for the Eocene Borçka volcanic rocks on the eastern corner of the eastern Pontide orogenic belt (NE Turkey). Borçka (Artvin) volcanic rocks are divided into three suites-basic dyke, Borçka basalt, and Civanköy suite. These rocks contain plagioclase (An49-88), clinopyroxene (Wo38-49En38-54Fs8-25), hornblende (Mg#=0.57-0.74) phenocrysts, and magnetite/titanomagnetite and apatite microphenocrysts. 40Ar-39Ar ages on hornblendes, ranging from 46.9±0.1 to 39.9±0.5Ma, within the middle Eocene. The volcanic rocks show tholeiitic-calc-alkaline affinities and have low-to-medium K contents. They are enriched in large ion lithophile (LILE) and light rare earth elements (LREE), with pronounced depleted high field strength elements (HFSE). The chondrite-normalized REE patterns (Lacn/Lucn=1-19) show low-to-medium enrichment, indicating similar sources for the rock suite. Initial 87Sr/86Sr values [(87Sr/86Sr)46Ma] vary between 0.70423 and 0.70495, while initial 143Nd/144Nd values [(143Nd/144Nd)46Ma] lie between 0.51263 and 0.51285. The main solidification processes involved in the evolution of the volcanics consist of fractional crystallization, with minor amounts of crustal contamination. All our evidences support the conclusion that the parental magma of the rocks probably derived from an enriched mantle, previously metasomatized by fluids derived from subducted slab, in a post-collisional, extension-related geodynamic setting.
AtıfScopus93WoS84OpenAlex88İncele - BildiriYalnız künye2015Scopus SJRQ4Antioxidant activity and total phenolic content of bergamot (citrus bergamia risso) fruits
Ercisli, Sezai; Uzun, Aydin; Yilmaz, Kadir Ugurtan; Sengul, Memnune; Yildiz, Hilal; Uysal, Onur
Bergamot extract is used to obtain fragrant tea (Earl Grey) and also its rind is used to make some jams. Calcium citrate and citric acid can be obtained from bergamot juice. In the study, antioxidant and total phenolic content of bergamot juice were determined. Two methods, namely β-carotene bleaching and DPPH assay were used to determine total antioxidant capacity, while Folin-Ciocalteu reagent was used to determine total phenols. Results showed that bergamot had high total phenolic (80.06 μg GAE/mg DW) and also high total antioxidant capacity with β-carotene bleaching (60.12%) and with DPPH (180 mg/100 ml). The study demonstrates the nutritional potential of bergamot juice.
AtıfScopus1WoS2OpenAlex1İncele - MakaleYalnız künye2015Scopus SJRQ2Organic maturity and hydrocarbon potential of liassic coals from the eastern Pontides, NE Turkey
Eker, C.S.; Sipahi, F.; Akpnar, I.
Organic matter content, type of organic material, and thermal maturity of Lias-aged coals of the Gumushane and Bayburt areas were investigated. The total organic carbon contents of coals in the Gumushane area range from 0.39-35.46 wt%, and in the Bayburt area range from 0.02-50.64 wt%. The Gumushane (except Güvercinlik field) and Bayburt areas coals have low hydrogen index values. The coal samples contain a mixture of Type II and Type III kerogens. Based on average Tmax values Liassic coals in the Gumushane and Bayburt (except Cerci field) areas are mature, and potential yields are low.
AtıfScopus7WoS7OpenAlex9İncele - MakaleYalnız künye2011Scopus SJRQ3Petrogenesis of a Late Cretaceous composite pluton from the eastern Pontides: The Daǧbasi pluton, NE Turkey
Kaygusuz, Abdullah; Aydingakir, Emre
Zircon U-Pb ages, major and trace elements, and Sr-Nd isotope data are reported for the Late Cretaceous Dagbasi pluton from the eastern Pontides, NE Turkey. This pluton has calc-alkaline affinity and displays typical features of volcanic arc granitoids. It is a composite pluton consisting of tonalite, granodiorite, and monzogranite, all containing mafic microgranular enclaves (MMEs). Based on U-Pb zircon SHRIMP dating, magma emplacement ages of the tonalite, granodiorite, and monzogranite are 88.1 ± 1.7 Ma, 86.0 ±2.0 Ma, and 82.9 ± 1.3 Ma, respectively. The tonalites have low SiO2 (60-64 wt%) and display metaluminous to peraluminous characteristics. They have similar Lacn/Lucn (1.5-7.3) and Eu/Eu* (0.65-0.88) values compared to granodiorites and monzogranites. The isotopic signatures of these rocks εNd(i) = -1.4 to -1.7; 87Sr/86Sr(i) = 0.7056-0.7060) are largely similar to granodiorites and monzogranites. Samples from the granodiorites and monzogranites have SiO2 between 69 and 76 wt% and display peraluminous to slightly metaluminous characteristics. Chondrite-normalized REE patterns are characterized by moderate Lacn/Lucn ratios (1.6-7.1), with pronounced negative or positive Eu anomalies (Eu/Eu* = 0.46-1.11). Radiogenic isotope signatures of granodiorites and monzogranites show overlapping 87Sr/86Sr(i), (0.7057-0.7067) and εNd(i) (-3.2 to + 1.5) values. The MMEs have similar geochemical and isotopic features as the host rocks. All plutonic rocks are enriched in large ion lithophile elements (LILE) and light rare earth elements (LREE) relative to high field strength elements (HFSE). Fractionation of plagioclase, hornblende, and Fe-Ti oxides played an important role in the evolution of Daǧbasi granitoids. All these geochemical and isotopic characteristics suggest an origin by dehydration melting of an amphibolitic lower crustal source.
AtıfScopus44WoS42OpenAlex45İncele - BildiriYalnız künye2015Well-posedness of a fourth order of accuracy difference scheme for the Neumann type overdetermined elliptic problem
Ashyralyyev, Charyyar
In the present paper, inverse elliptic problem with Neumann type overdetermination is discussed. A fourth order of accuracy difference scheme for the solution of this identification problem is presented. Stability, almost coercive stability and coercive inequalities for the solution of difference problem are obtained. In application, a fourth order approximation of the inverse problem for multidimensional elliptic equation with Neumann type overdetermination and Dirichlet boundary condition is studied.
AtıfScopus3WoS3OpenAlex3İncele - MakaleAçık Erişim2012Scopus SJRQ2Determination of the dependence of HPGe virtual point detector location on source dimensions in 60 keV-2 MeV range using Monte Carlo simulation
Çelik, N.
The virtual point detector (VPD) concept for an HPGe detector with 55% relative efficiency was confirmed for bulky sources having different diameters and heights. After reproducing experimental data, Monte Carlo simulation was used to investigate the dependence of VPD location on photon energy for various source diameters and heights in the energy range from 60 keV to 2 MeV. The simulations were confirmed using a soil reference source prepared by International Atomic Energy Agency (IAEA). It was seen that increasing photon energy makes significant changes in VPD location up to 600 keV. It was observed that VPD locations increase with increasing source diameter and height. It was also seen that VPD locations were approximately linearly dependent on source diameters and heights.
AtıfScopus5WoS5OpenAlex6İncele - MakaleYalnız künye2015Scopus SJRQ2Building-up a code for the purpose of TRUE coincidence summing correction in gamma-ray spectrometry with EGS4
Celik, Necati; Altin, Duygu; Cevik, Ugur
In the presented study, a code was created for the purpose of true coincidence summing (TCS) correction factors for 134Cs. The created code was implemented in EGS4 Monte Carlo simulation package. TCS factors were determined for nine different energies for different detector-source geometries. The calculated results were successfully validated by an empirical method using a point 134Cs radioactive source and a p-type HPGe detector having 55% relative efficiency. Although the code created gives TCS factors only for 134Cs, the technique presented can be used to obtain the factors for any radionuclide used in gamma-ray spectrometry.
AtıfScopus5WoS4OpenAlex4İncele - MakaleAçık Erişim2010Scopus SJRQ14D cadastres: First analysis of legal, organizational, and technical impact-With a case study on utility networks
Döner, Fatih; Thompson, Rod; Stoter, Jantien; Lemmen, Christiaan; Ploeger, Hendrik; van Oosterom, Peter; Zlatanova, Sisi
The increasing complexity and flexibility of modern land use requires that cadastres need an improved capacity to manage the third dimension. As the world is per definition not static, there also will be needs in relation to the representation of the temporal (fourth) dimension either integrated with the spatial dimensions or as separate attribute(s). In this paper, registration of utility networks in cadastre are considered in this 3D. +. time (=4D) context. A number of countries in the world have developed methods to register utility networks complying with their legal, organizational, and technical structure. We researched the different approaches of three specific countries: Turkey, The Netherlands and Queensland, Australia. These are analysed to evaluate a solution that matches legal, organizational, and technical cadastral requirements in the most optimal way.
AtıfScopus70WoS61İncele - MakaleYalnız künye2014Scopus SJRQ4Smoking habits and the related sociodemographic characteristics in university students; [Üniversite öǧrencilerinin sigara İçme davrani{dotless}şlari{dotless} ve İlişkili sosyodemografik özellikleri]
Özcebe, Hilal; Doǧan, Bahar Güçiz; Inal, Ebru; Haznedaroǧlu, Dilek; Bertan, Münevver
Objectives: Smoking is an important public health issue in Turkey. This study set out to investigate the smoking prevalence among first and fourth grade university students as well as the associated socio-demographic variables. Material And Methods: A survey was carried out by the International Children's Centre (ICC) in the faculties of Science and Literature, Education and Medicine of nine Turkish Universities to determine the knowledge and life styles of the 1st and 4th grade university students in adolescence (2009). A total of 5.221 students were evaluated. Data were analysed using SPPS 16.0-9907290 statistical package program. Results: The first grade students with illiterate mothers (23.0%), those who were living alone at home (37.7%) and those who considered receiving inadequate pocket money (24.9%) had a higher level of smoking prevalence (p<0.05). The fourth grade students with illiterate mothers (34.9%), those who were living with their friends (34.0%), those who perceived their economic situation bad (37.7%) and those who considered receiving inadequate pocket money (36.3%) had a higher level of smoking prevalence (p<0.05). Conclusion: A relationship between smoking habits of university students and some socio-demographic characteristics was found. We believe that more priority should be given to health promotion interventions among university students, especially among those of low socioeconomic status. On the other hand, in order to monitor the efficacy of smoking-related interventions among young people, there is a need for early detection of young individuals who are at risk and urgent interventions should be carried out.
AtıfScopus12WoS13OpenAlex18İncele - MakaleAçık Erişim2014Scopus SJRQ3Stereotactic Excision of Additional Lesions Detected with Intraoperative Ultrasound Examination During Radiofrequency Dissecting Sealar (Habib®) Assisted Hepatic Metastasectomy: Report of 4 Cases
Altuntas, Yunus E.; Unel, Sacide; Gezen, Fazli C.; Aksakal, Nihat; Civil, Osman; Vural, Selahattin; Ozates, Mustafa; Oncel, Mustafa
Intraoperative ultrasound has been using to achieve a proper resection strategy in patients undergoing a hepatic colorectal metastasectomy. This study aims to describe and reveal the place of stereotactic metastasectomy in nonpalpable colorectal liver metastases (CLM). A chart review was initiated for all patients underwent resection for CLM between 2006 and 2011. The data concerning perioperative data and intraoperative strategy were abstracted. Among the 58 patients, who underwent a resection for CLM, 4 (6.9 %) (all men, median age 65.5, range 49-72, years) necessitated a stereotactic metastasectomy. Preoperative evaluations showed 1 (n = 1), 2 (n = 2), or 3 (n = 1) lesions, and intraoperative ultrasound (IUS) found an additional lesion in a case. Stereotactic marking was performed for nonpalpable lesions located in segments IVA, II, and VI and at the junction of segments V and VI. The margins were negative for all lesions both resected with conventional and stereotactic techniques. The examinations of the stereotactic resection materials revealed metastatic adenocarcinoma (patients n = 2), focal nodular hyperplasia (n = 1), and abnormal benign liver histology probably induced by chemotherapy (n = 1). The median (range) operation and hospitalization periods were 217.5 (150-310) minutes and 5.5 (2-9) days. No complications were observed except biliary fistula in a case, which spontaneously disappeared within 2 weeks. A patient died due to systemic disease including hepatic metastases 33 months after the liver surgery. Stereotactic metastasectomy may be feasible for the removal of nonpalpable CLM. Further evaluations are necessitated to understand the accurate place of this novel technique.
- BildiriYalnız künye2014Pid controlled line follower robot design on indoor 3D networks
Kose, Oguz; Karas, Ismail Rakip
Robots are commonly used and developed for different purposes in various areas such as research, educational, commercial, and industrial fields, also in emergency situations and space missions in today’s modern world. Robots are the machines that increasingly gain the importance with each passing day by the development of micro-electronics and micro-mechanics industry. To define a machine as a robot, it needs to have the sensors to check its environment; the mechanisms to evaluate the information received from these sensors and to transfer to the processing units. In this study, an intelligent controlled line follower robot was developed. Proportional-integral-derivative (PID) method was used for controlling. According to the information from the sensors, the method applied to the engines as Pulse Width Modulation (PWM). Online Fez Panda II embedded system board was used as the control element. This board has a 2-bit ARM 7 (Acorn RISC Machine) processor and it is suitable to.Net Micro Framework Technology. The system software was written with C# programming language in Visual Studio 2010 platform. The robot was tested on 3D indoor network, and has potential to be used for evacuation process on extraordinary sitautions in buildings. Another usage areas of this robot are factories and production lines. 3D network analyses and navigation applications could also be performed using the lines on the ground of this kind of environment.
- MakaleAçık Erişim2015Analysis of Tribo-corrosion Properties of MAO/DLC Coatings Using a Duplex Process on Ti6Al4V Alloys
Sukuroglu, Ebru Emine; Totik, Yasar; Arslan, Ersin; Efeoglu, Ihsan
In recent years, various technologies have been increasingly investigated for the surface modification of Ti and Ti alloys. Microarc oxidation (MAO) is one of the effective techniques to improve surface properties. However, it has some disadvantages for sliding wear applications and/or aggressive environments. In this study, the combined MAO and closed field unbalanced magnetron sputtering process was used to deposit duplex MAO/diamond-like carbon (DLC) coatings on Ti6Al4V alloy. Analysis of the microstructures, morphology, and crystallographic structure were performed by using a SEM, Raman, and XRD. The wear, corrosion, and tribo-corrosion properties of the coatings were investigated using the pin-on-disk wear test, potentiodynamic polarization test, and combining tribo-corrosion test unit, respectively. The results of this study have shown that duplex MAO/DLC coatings exhibit better wear, corrosion, and tribo-corrosion properties than the DLC or MAO monolayer on Ti6Al4V alloy substrate. MAO/DLC coatings exhibited dense structure, lower coefficient of friction and corrosion current density, and higher tribo-corrosion resistance. The results have also shown that MAO/DLC duplex coatings on Ti6Al4V substrates increased the tribo-corrosion resistance by acting as a barrier layer.
AtıfScopus16OpenAlex15İncele
