Sürdürülebilir Kalkınma Amaçları

• 1

Yazarlar

• Akar, Kubra(1)
• Arslan, Ersin(1)
• Belet, Ali Kadir(1)
• Demirci, Fatih(1)
• Dundar, Serkan(1)
• Efeoglu, Ihsan(1)
• Emine Sukuroglu, Ebru(1)
• Ezgi, Yusuf(1)
• Faheemuddin, Muhammad(1)
• Khurshid, Zohaib(1)
• Sukuroglu, Ebru Emine(1)
• Sukuroglu, Suleyman(1)
• Tekin, Bahar(1)
• Tekin, Samet(1)
• Totik, Yasar(1)
• Şüküroğlu, Ebru Emine(1)
• Şüküroğlu, Süleyman(1)

• MakaleYalnız künye2025Scopus SJRQ2/r/gumushane/14079
  Investigation of structural and adhesion properties of ZnO and h-BN doped TiO2 coatings on Cp–Ti alloy

  Belet, Ali Kadir; Şüküroğlu, Süleyman; Şüküroğlu, Ebru Emine

  Titanium and its alloys are widely used in aircraft, automotive, chemistry, marine, and military industries owing to their superior properties such as specific strength, very low density, high melting point, high corrosion resistance, good fatigue strength and toughness, low elastic modules, and excellent biocompatibility. However, insufficient tribological properties such as high and unstable friction coefficient, low scraping wear resistance and strong adhesion tendency, and poor corrosion resistance in some aggressive corrosive environments such as severe chloride solution limits the use of titanium and its alloys in some engineering applications. For this reason, it has become quite common to change and/or improve the surface properties of titanium and its alloys. In this study, the structural properties of TiO2 coatings with zinc oxide (ZnO) added TiO2 and hexagonal boron nitride (h-BN) added TiO2 grown composite coatings, respectively, on Cp–Ti substrates by micro-arc oxidation method and the adhesion behavior between the base material and coatings were investigated.

  AtıfScopus1·WoS1·OpenAlex1

  İncele
• MakaleAçık Erişim2024Scopus SJRQ2/r/gumushane/12000
  Effect of micro-arc oxidation coatings with graphene oxide and graphite on osseointegration of titanium implants-an in vivo study

  Tekin, Bahar; Dundar, Serkan; Tekin, Samet; Emine Sukuroglu, Ebru; Khurshid, Zohaib; Ezgi, Yusuf; Demirci, Fatih; Faheemuddin, Muhammad

  Background: This in vivo study evaluated the effect of graphene oxide and graphite coatings, coupled with the micro-arc oxidation (MAO) surface roughening technique, known for their mechanical strength, chemical stability, and antibacterial properties. The main objective was to assess the degree of improvement in osseointegration of titanium implants resulting from these interventions. Materials and methods: In this study, 32 female rats were utilized and randomly allocated into four groups (n = 8 each): machined surface titanium implants (control), those roughened by the MAO method, those coated with graphene oxide-doped MAO, and those with a graphite-doped MAO coating. Titanium implants were surgically placed in the right tibia of the rats. Rats undergoing no additional procedures during the 4-week experimental period were sacrificed at the end. Then, the implants and surrounding bone tissues were separated and embedded in acrylic blocks for reverse torque analysis. Using a digital torque device, the rotational force was applied to all samples using a hex driver and racquet until implant separation from the bone occurred, with the corresponding values recorded on the digital display. Then, statistical analysis was performed to analyze the data. Results: No statistically significant difference between the groups was observed in the biomechanical bone–implant connection levels (N/cm) (P = 0.268). Post-hoc tests were not required because no discernible differences were identified between the groups. Conclusion: Within the scope of this study, implants treated with the MAO method, along with those coated with graphene oxide- and graphite-doped MAO method, did not exhibit significant superiority in terms of osseointegration compared to machined surface titanium implants.

  • 
  AtıfScopus9·WoS8·OpenAlex10

  İncele
• MakaleYalnız künye2017Scopus SJRQ2/r/gumushane/13635
  The effect of TiO2 coating on biological NiTi alloys after micro-arc oxidation treatment for corrosion resistance

  Sukuroglu, Ebru Emine; Sukuroglu, Suleyman; Akar, Kubra; Totik, Yasar; Efeoglu, Ihsan; Arslan, Ersin

  NiTi alloys exhibit good properties, such as shape memory behavior, high corrosion resistant, having the closest elasticity modulus of a human bone and superior biocompatibility properties. However, the surface problems that arise during the use of this alloy limit the usage in the industry and health sector. In recent years, micro-arc oxidation method is used to improve the surface properties and increase the usage of these alloys. In this study, the TiO2 coatings were deposited on the NiTi substrates. The surface topography, morphology, crystallographic structure, and thickness of the coatings were determined using scanning electron microscopy and X-ray diffraction. The corrosion properties were investigated using potentiostat test unit in two different media such as NaCl solution and simulated body fluid. The results show that the coated samples have higher corrosion resistance than uncoated samples in the two different media.

  AtıfScopus10·WoS11·OpenAlex11

  İncele