Sürdürülebilir Kalkınma Amaçları
Yazarlar
- Ashyralyyev, Charyyar(2)
- Akgol, Kadir(1)
- Altin, Duygu(1)
- Altun, Fatma(1)
- Altunişik, A.C.(1)
- Arslan, Ersin(1)
- Aydin, Metin Mutlu(1)
- Cakir, Mehmet Ali(1)
- Cakir, Sümeyra Cay(1)
- Celik, Necati(1)
- Cevik, Ugur(1)
- Dedeturk, Mutlu(1)
- Efeoglu, Ihsan(1)
- Genç, A.F.(1)
- Gunay, Banihan(1)
- Günaydin, M.(1)
- Karahasan, O.(1)
- Köseoğlu, Ali(1)
- Okur, F.Y.(1)
- Sukuroglu, Ebru Emine(1)
- Totik, Yasar(1)
- Unlu, Ramazan(1)
- Xanthopoulos, Petros(1)
- Şahin, Rıdvan(1)
Yayınlar
- MakaleAçık Erişim2025Future of Clean Cooking Energy Access in Emerging Economies by 2030
Cakir, Mehmet Ali; Unlu, Ramazan; Cakir, Sümeyra Cay; Xanthopoulos, Petros
This study assesses the future of clean energy and technology access for cooking in emerging economic blocs—BRICS, MINT, ASEAN, and MENA—through 2030. Cooking contributes 3% of global greenhouse gas emissions, with over half of household emissions coming from cooking. Therefore, clean cooking energy is critical for sustainability and human health. The study aims to evaluate the likelihood of achieving the UN Sustainable Development Goal of universal clean cooking energy access by 2030 and the 2050 net-zero emissions target. Machine learning techniques, such as support vector regression, gradient boosting, and linear regression, alongside an ensemble approach, provide forecasts for these regions. The findings show a varied outlook. Within ASEAN, two countries are expected to reach 100% clean energy access for cooking by 2030, while two are likely to experience a decline. The MENA region shows stronger progress, with eight countries expected to meet the 2030 target. Among BRICS countries, only India is projected to reach full accessibility, while Russia faces a decline. The MINT countries face challenges, with none expected to meet the target, and Nigeria is projected to experience a decrease in clean energy access. The study concludes that the current trajectory makes achieving the 2030 Sustainable Development Goals and the 2050 net-zero emissions target unlikely for these regions. Policymakers must reassess their strategies and learn from successful countries to improve outcomes.
- MakaleAçık Erişim2024Aggregation operators of complex fuzzy Z-number sets and their applications in multi-criteria decision making
Köseoğlu, Ali; Altun, Fatma; Şahin, Rıdvan
Fuzzy sets (FSs) are a flexible and powerful tool for reasoning about uncertain situations that cannot be adequately expressed by classical sets. However, these sets fall short in two areas. The first is the reliability of this tool. Z-numbers are an extension of fuzzy numbers that improve the representation of uncertainty by combining two important components: restriction and reliability. The second is the problems that need to be solved simultaneously. Complex fuzzy sets (CFSs) overcome this problem by adding a second dimension to fuzzy numbers and simultaneously adding connected elements to the solution. However, they are insufficient when it comes to problems involving these two areas. We cannot express real-life problems that need to be solved at the same time and require the reliability of the information given with any set approach given in the literature. Therefore, in this study, we propose the complex fuzzy Z-number set (CFZNS), a generalization of Z-numbers and CFS, which fills this gap. We provide the operational laws of CFZNS along with some properties. Additionally, we define two essential aggregation operators called complex fuzzy Z-number weighted averaging (CFZNWA) and complex fuzzy Z-number weighted geometric (CFZNWG) operators. Then, we present an illustrative example to demonstrate the proficiency and superiority of the proposed approach. Thus, we process multiple fuzzy expressions simultaneously and take into account the reliability of these fuzzy expressions in applications. Furthermore, we compare the results with the existing set operations to confirm the advantages and demonstrate the efficiency of the proposed approach. Considering the simultaneous expression of fuzzy statements, this study can serve as a foundation for new aggregation operators and decision-making problems and can be extended to many new applications such as pattern recognition and clustering.
- MakaleYalnız künye2019Performance Comparison of Various Chicane Types: A Driving Simulator Study
Aydin, Metin Mutlu; Gunay, Banihan; Akgol, Kadir
Urban streets are becoming noisy, less safe and unattractive places due to high traffic volumes and vehicular speeds. Especially, high speeds causes many problems such as traffic accidents, noise, etc. To prevent these problems and negative effects of speeding, traffic calming measures have been widely used in many developed countries. In this study, the effectiveness of ten most common chicane types on speed limit compliance were examined by comparing and ranking chicanes according to their performance. For this purpose, a “Safety Index” was developed and an Ordinary Least Square Regression analysis was performed to identify safest chicane types for undivided two-lane and divided four-lane roads by using various parameters. Additionally, statistical tests were conducted to determine the most important driver characteristics of drivers before and inside the chicanes. For the analyses, all necessary data were obtained from the driving tests of 106 volunteers using a driving simulator. For the simulation scenarios, Akdeniz University’s (Antalya/Turkey) campus roads were selected as a case area. The results showed that Chicane Types 2 (CT-2) and 7 (CT-7) have the highest Safety Index values (0.69 and 0.98) and they were found to be the most proper CTs for the undivided and divided roads, respectively. From the statistical tests, it was also found that education level, gender and driving license duration were found to be the statistically significant parameters on speed choice for the most proper chicane types. Additionally, it was concluded that the most important driver characteristics are determined as age (has a negative effect) and gender (to be male has a positive effect) of drivers before and inside the chicanes. All these findings show that the investigation of different CTs has a great potential to reduce speeds and ensure safety in urban minor roads to limit vehicle speeds.
- MakaleYalnız künye2018Automated Model Updating Effect on the Linear and Nonlinear Dynamic Responses of Historical Masonry Structures
Altunişik, A.C.; Okur, F.Y.; Genç, A.F.; Günaydin, M.; Karahasan, O.
Finite element models supply the simulation of the problems to obtain the structural behaviors under different loading conditions. The updating processes based on changing the uncertain parameters such as material properties, boundary conditions, meshing size etc. are made to create actual finite element models in order to represent the real conditions of the problems. This procedure can be made using two methods, namely manual model updating and global/local automatic model updating. The global/local automatic model updating procedures are very popular owing to the applicability to all kind of engineering structures, minimizing the differences nearly to zero, availability of damage localization and structural health monitoring. In this paper a historical masonry armory building selected as an application and its finite element analyses, experimental measurements and automated model updating processes are carried out. The finite element model of the structures was developed with ANSYS software and first three natural frequencies are attained. The experimental dynamic characteristics such as natural frequencies, damping ratios and mode shapes are obtained using ambient vibration method. The differences between experimental and numerical frequencies are minimized up to the range of 0–1%, by using local updating procedure. The linear and nonlinear seismic analyses of the building are conducted on initial and updated models. At the end of the analyses, maximum displacements, principal stresses and strains are given with detail. In addition, crack distributions diagrams are attained to validate the stresses accumulation points. It can be seen that there is an increasing trend in the displacement, stress and strain values after finite element model updating both linear and nonlinear analysis. In addition, linear and nonlinear analysis results are compared with each other to evaluate the nonlinear analysis effect. It is concluded that the displacement and strain values are increased after nonlinear analysis. But, there is not any agreement in stress values.
- MakaleAçık Erişim2017Numerical solution to Bitsadze-Samarskii type elliptic overdetermined multipoint NBVP
Ashyralyyev, Charyyar
This paper is devoted to a Bitsadze-Samarskii type overdetermined multipoint nonlocal boundary value problem (NBVP). This inverse problem is reduced to an auxiliary multipoint NBVP. Stability estimates for the solution of the auxiliary NBVP are established. The finite difference method is applied to get the first and second order of accuracy of approximate solutions of the abstract overdetermined problem. Stability estimates for the solution of difference problems are proved. Then the established abstract results are applied to get stability estimates for the solution of the Bitsadze-Samarskii type overdetermined elliptic multidimensional differential and difference problems with multipoint nonlocal boundary conditions (NBVC). Finally, numerical results with explanation on the realization for two dimensional and three dimensional elliptic overdetermined multipoint NBVPs in test examples are presented.
- MakaleYalnız künye2016A New Approach for Determination of Volumetric Water Content in Soil Samples by Gamma-Ray Transmission
Celik, Necati; Altin, Duygu; Cevik, Ugur
A new method was presented for the purpose of volumetric water content determination in any soil sample by gamma-ray transmission. Monte Carlo (MC) simulation technique was used to determine the functional behavior of the linear attenuation coefficient of soil samples having different water contents for three soil samples. Using this functional behavior, the linear attenuation coefficients of dry soil and water were obtained from the intercept and the slope, respectively. It was experimentally shown that the mass attenuation coefficients of soil samples were not sensitive to the chemical composition but only to the physical density. This independence was exploited in this study to obtain the linear attenuation coefficient of a completely dry soil which was found to be 0.1409, 0.1274, and 0.1657 cm−1 for Gumushane, Ardahan, and Trabzon soil, respectively. The linear attenuation coefficient of water was determined to be 0.09 cm−1. Then, the volumetric water contents were obtained by measuring the gamma-ray intensities passed through three wet soil samples. The results were found to be 0.186, 0.182, and 0.214 cm3 cm−3 for Gumushane, Ardahan, and Trabzon soil, respectively. The results obtained by the method introduced were compared with the results obtained using gravimetric method. A very good agreement was observed.
- MakaleAçık Erişim2015Approximation of the inverse elliptic problem with mixed boundary value conditions and overdetermination
Ashyralyyev, Charyyar; Dedeturk, Mutlu
In the present study, the inverse problem for a multidimensional elliptic equation with mixed boundary conditions and overdetermination is considered. The first and second orders of accuracy in t and the second order of accuracy in space variables for the approximate solution of this inverse problem are constructed. Stability, almost coercive stability, and coercive stability estimates for the solution of these difference schemes are established. For the two-dimensional inverse problems with mixed boundary value conditions, numerical results are presented in test examples.
- MakaleAçık Erişim2015Analysis of Tribo-corrosion Properties of MAO/DLC Coatings Using a Duplex Process on Ti6Al4V Alloys
Sukuroglu, Ebru Emine; Totik, Yasar; Arslan, Ersin; Efeoglu, Ihsan
In recent years, various technologies have been increasingly investigated for the surface modification of Ti and Ti alloys. Microarc oxidation (MAO) is one of the effective techniques to improve surface properties. However, it has some disadvantages for sliding wear applications and/or aggressive environments. In this study, the combined MAO and closed field unbalanced magnetron sputtering process was used to deposit duplex MAO/diamond-like carbon (DLC) coatings on Ti6Al4V alloy. Analysis of the microstructures, morphology, and crystallographic structure were performed by using a SEM, Raman, and XRD. The wear, corrosion, and tribo-corrosion properties of the coatings were investigated using the pin-on-disk wear test, potentiodynamic polarization test, and combining tribo-corrosion test unit, respectively. The results of this study have shown that duplex MAO/DLC coatings exhibit better wear, corrosion, and tribo-corrosion properties than the DLC or MAO monolayer on Ti6Al4V alloy substrate. MAO/DLC coatings exhibited dense structure, lower coefficient of friction and corrosion current density, and higher tribo-corrosion resistance. The results have also shown that MAO/DLC duplex coatings on Ti6Al4V substrates increased the tribo-corrosion resistance by acting as a barrier layer.
- DergiJournal of Bio- and Tribo-Corrosion
- DergiComplex and Intelligent Systems
- DergiExperimental Techniques
- DergiWater, Air, and Soil Pollution
- DergiOperations Research Forum