Sürdürülebilir Kalkınma Amaçları

  • MakaleYalnız künye2026
    Nutritional value, heavy metal contamination and health risk assessment of Phalangium opilio Linnaeus, 1758 as a potential edible arachnid

    Gürmeriç, Hüseyin Ender; Kurt, Pınar; Ürkek, Bayram

    Edible insects and arachnids have increasingly been recognised as alternative food sources. The aim of the study was to evaluate the harvestman species Phalangium opilio (P. opilio) Linnaeus, 1758 as a new edible species. In this research, some chemical properties, fatty acid and mineral composition of the P. opilio were investigated. Additionally, the heavy metal contamination and its health risk assessment were evaluated. The fat and protein contents of the samples were 1.18% and 14.07%, respectively. The P. opilio had unsaturated fatty acids such as myristoleic, palmitoleic, linoleic and oleic acids. The P. opilio was analyzed for K, Mg, Na, Ca, Fe, Zn, Al, Mn, Se contents, estimated daily intake and contributions to the recommended daily mineral intake were calculated. The heavy metals detected in the P. opilio were Cu, Ni, Cd, Pb, As, Cr, Co and Ag. The Cd had the highest target hazard quotient value (2.16). The hazard index value of the P. opilio was 3.32 and it had a potential health risk level. Consequently, although P. opilio exhibited favourable nutritional properties, the THQ value for Cd and the cumulative HI value exceeded the recommended safety threshold, indicating a potential non-carcinogenic health risk associated with its consumption. Accordingly, considering the detected heavy metal levels and associated health risk indices, the consumption of wild-collected P. opilio should be approached with caution. © Hüseyin Ender Gürmeriç et al., 2026. Published with license by Koninklijke Brill BV. This work is published by Koninklijke Brill BV. Koninklijke Brill bv incorporates the imprints Brill, Brill Nijhoff, Brill Schöningh, Brill Fink, Brill mentis, Brill Wageningen Academic, Vandenhoeck & Ruprecht, Böhlau and V&R unipress. Koninklijke Brill BV reserves the right to protect the publication against unauthorized use and to authorize dissemination by means of offprints, legitimate photocopies, microform editions, reprints, translations, and secondary information sources, such as abstracting and indexing services including databases. Requests for commercial re-use, use of parts of the publication, and/or translations must be addressed to Koninklijke Brill BV.

    • SDG 2 · Açlığa Son
    • SDG 3 · Sağlık ve Kaliteli Yaşam
  • MakaleAçık Erişim2026
    Potentially Toxic Metal Levels in Cheeses Produced in Türkiye: Regional Variation, Milk Source, Ripening Stage, Production Type, and Associated Dietary Exposure and Health Risk

    Gürmeriç, Hüseyin Ender; Şengül, Mustafa; Basaran, Burhan

    This study investigated potentially toxic metal (PTM) levels in cheeses produced in different regions of Türkiye and evaluated the associated dietary exposure and non-carcinogenic health risk. A total of 84 cheese samples were collected from seven geographical regions and classified according to milk source, ripening stage, and production type. After microwave-assisted acid digestion, PTM levels were quantified by inductively coupled plasma mass spectrometry (ICP-MS), and exposure and non-carcinogenic risk were evaluated using Estimated Daily Intake (EDI), Target Hazard Quotient (THQ), and Hazard Index (HI). Aluminium (Al), iron (Fe), and zinc (Zn) ranged from <0.00215 to 7.29,<0.00769 to 38.8, and 0.68 to 56.6 mg/kg wet weight, respectively, whereas chromium (Cr), nickel (Ni), copper (Cu), selenium (Se), cadmium (Cd), and lead (Pb) ranged from <0.58 to 244, <1.26 to 369, <1.88 to 4067, <0.91 to 1378, <0.06 to 12.3, and <2.19 to 1754 µg/kg wet weight, respectively. Values marked with “<” represent concentrations below the limit of quantification (LOQ). Arsenic (As) was not detected in any sample. Significant differences were observed for selected PTMs according to ripening stage, milk source, production type, and region (p<0.05). The toxicological contribution (TC) values for nutritional PTM exposure were low. THQ and HI values remained below 1, suggesting a low overall non-carcinogenic risk; however, Pb exceedances in some samples indicate the need for continued PTM monitoring.

    • SDG 2 · Açlığa Son
    • SDG 3 · Sağlık ve Kaliteli Yaşam
  • Derleme MakaleAçık Erişim2025
    Microplastics in Dairy Products: Occurrence, Characterization, Contamination Sources, Detection Methods, and Future Challenges

    Gürmeriç, Hüseyin Ender; Basaran, Burhan

    In this study, data from 17 studies reporting the presence of microplastics in milk and dairy products in the literature were examined with a product-based systematic approach. In addition, geographical comparisons were made between different countries. In milk and dairy products, the concentration of microplastics has been reported to exhibit a broad range, extending from non-detectable levels to as high as 10,040 MPs per kilogram, contingent upon the specific product types. Milk powder (especially baby milk powder) stands out as the riskiest product group in terms of microplastic content. Although the sizes and colors of the detected microplastics vary significantly, the fiber form is generally predominant. While polyethylene, polypropylene, polyamide and polyester are among the polymers frequently detected, high-temperature-resistant industrial polymers such as polytetrafluoroethylene, polysulfone, polyurethane were also encountered. In addition, the presence of some polymers (such polyvinyl chloride, polyurethane) that are toxicologically risky for human health was reported in the studies. In addition, the study evaluated the chemical, enzymatic and physical methods used for the separation and identification of MPs; the advantages and limitations of FT-IR, Raman and other analysis techniques were revealed. This study reveals that MP contamination in milk and dairy products is a multidimensional problem. The findings show that milk and dairy products are highly susceptible to plastic contamination at every stage of production.

    • SDG 3 · Sağlık ve Kaliteli Yaşam
  • MakaleAçık Erişim2024
    Assessment of the antioxidant and ACE-inhibitory activities and some quality characteristics of Kaşar cheese produced by probiotic Lactobacillus acidophilus

    Gürmeriç, Hüseyin Ender; Şengül, Mustafa; Erkaya-Kotan, Tuba

    In this study, four types of Kaşar cheese were produced using raw milk (C), starter culture (Streptococcus thermophilus and Lactobacillus delbrueckii ssp. bulgaricus) (S), starter culture + probiotic Lactobacillus acidophilus ATCC 4356 (SLA), and probiotic L. acidophilus ATCC 4356 (LA) were produced and ripened at 6 ± 2 °C for 150 days. The physicochemical, microbiological, proteolysis, electrophoretic (Urea-PAGE), ACE-inhibitory, and antioxidant activity analyses of vacuum-packed Kaşar cheeses were performed on 5, 30, 60, 90, 120, and 150 days of ripening. During ripening, no significant differences (p > 0.05) were detected in total solids, fat, and protein values of Kaşar cheeses. Titratable acidity, water-soluble nitrogen (WSN), ripening index (RI), and electrophoresis results of cheese samples showed an increase while pH values decreased. Also, the degradation products of αs1-casein were higher than those of β-casein. The number of probiotic L. acidophilus ATCC 4356 after scalding decreased by an average of 1.57 log cfu/g. However, probiotic bacteria count increased during ripening and maintained their viability. The addition of L. acidophilus ATCC 4356 improved the bioactivity, electrophoresis, titratable acidity, and ripening index results of Kaşar cheese. ACE-inhibitory activity of Kaşar cheeses increased during ripening and had the highest value on the 150th day of ripening. Furthermore, antioxidant activity of Kaşar cheeses increased on the 60th day of ripening and then decreased. Consequently, the combination of probiotic bacteria and starter culture had a positive effect on the physicochemical, microbiological, and proteolytic properties of Kaşar cheese.

    • SDG 2 · Açlığa Son
  • MakaleAçık Erişim2023
    Piyasada satılan yoğurtların fizikokimyasal, mikrobiyolojik ve ade-inhibitör aktivitelerinin belirlenmesi

    Gürbüz, Zeynep; Şengül, Mustafa; Erkaya, Tuba; Gürmeriç, Hüseyin Ender

    Bu çalışmada, Erzurum piyasasında satılan 12 adet farklı ticari yoğurt örneğinin fizikokimyasal, mikrobiyolojik ve reolojik özellikleri ile Anjiyotensin Dönüştürücü Enzim (ADE)-inhibitör aktiviteleri belirlenmiştir. Yoğurtların kurumadde, yağ, protein, serum ayrılması, pH ve viskozite değerleri %11.11-18.05, %1.25-4.70, %3.28-4.66, 0.95-9.00 ml/25g, 3.79-4.61, 7913.0-30425.0 cP aralığında değişmiştir. Mikrobiyolojik analiz sonuçlarına göre yoğurtların L. bulgaricus ve S. thermophilus sayıları ise sırasıyla 5.67-8.32 ve 6.12-8.5 log kob/g aralığında bulunmuştur. Yoğurtların ADE-inhibitör aktivite % ve IC50 analiz sonuçları sırasıyla %55.57-77.90 ve 0.91-1.80 mg/ml arasında değişim göstermiştir. Yoğurt örneklerinin hepsi ADE-inhibitör aktivite göstermiş ve sonuçlar arasında önemli farklar (P &lt;0.05) olduğu ortaya konulmuştur.

    • SDG 2 · Açlığa Son
  • MakaleYalnız künye2021
    CHİA (Salvia hispanica L.) İLAVESİNİN DONDURMANIN FİZİKOKİMYASAL VE DUYUSAL ÖZELLİKLERİNE ETKİSİ

    Şengül, Mustafa; Ürkek, Bayram; Gürmeriç, Hüseyin Ender

    Bu çalışmada, %5, %10, %15 ve %20 oranlarında Chia tohumu (Salvia hispanica L.) ilave edilerek üretilendondurma örneklerinin fizikokimyasal ve duyusal özellikleri araştırılmıştır. Araştırma sonucunda, dondurmaörneklerinin %kuru madde, %kül, %protein ve ilk damlama zamanı değerleri chia tohumukonsantrasyonundaki artışa bağlı olarak yükselirken, %yağ, pH ve erime oranı değerlerinin düştüğübelirlenmiştir. Dondurma örneklerinin viskozite değerleri artan chia tohumu oranına bağlı olarakyükselmiştir. Chia tohumu ilavesi dondurma örneklerinin kolorimetrik özellikleri üzerinde önemlideğişiklilere neden olduğu ve L* ve beyazlık indeksi değerlerinin yükselen chia tohumu konsantrasyonu iledüştüğü tespit edilmiştir. Panelistler tarafından en yüksek duyusal puanlar kontrol örneğine verilmiştir. %5chia tohumu ilaveli örnekler renk ve görünüş, sakısımızsı yapı ve genel kabul edilebilirlik bakımındanistatistiksel olarak diğer chia içeren örneklerden daha yüksek puanlara sahip olduğu ortaya konulmuştur.Sonuç olarak, %5 oranında chia tohumu ilavesinin dondurmanın fizikokimyasal özelliklerini iyileştirmek veaynı zamanda besleyici değerini artırmak için doğal bir kaynak olarak kullanılabileceği sonucuna varılmıştır.Anahtar Kelimeler: Dondurma, chia tohumu, fizikokimyasal özellikler, duyusal özellikler

    • SDG 2 · Açlığa Son