Axial resistance of elliptical hollow section K-joints made of high strength steel

The present study examined the axial resistance of welded elliptical hollow section (EHS) K-joints made of high-strength steel (HSS). The axial resistance of EHS K-joints was affected by a range of factors, including the geometrical parameters, orientations, chord pre-stress levels, and the mechanical properties of the high-strength steel grades. This research aimed to investigate the performance of welded EHS K-joints made of HSS under axial loading conditions with or without chord pre-stresses. Finite element analysis was employed for numerical simulations to analyze the nonlinear behaviour of EHS K-joints with HSS. It was observed from the numerical results that the orientation types significantly affected normalised resistance ratios. In contrast, β, γ, θ, and chord pre-stress levels had minimal impact, as comparisons were based on normalised resistance ratios. However, non-dimensional geometric parameters and chord pre-stress levels notably influenced the axial joint resistance of the HSS K-joints. As for predicting the axial resistances of EHS K-joints with HSS, the numerical results indicated that the existing reduction factor might be unsafe for the equivalent RHS method to be applied in the current design guides. Therefore, a new reduction factor was proposed for EHS K-joints with HSS that yield unsafe results.