İlgi alanları

Sürdürülebilir Kalkınma Amaçları

• 17
• 16
• 3
• 1

• MakaleAçık Erişim2026/r/gumushane/13680
  Multi-criteria techno-economic evaluation of electric buses with vehicle-integrated photovoltaic for enhanced sustainability

  Başoğlu, Mustafa Engin

  This study presents a multi-criteria techno-economic evaluation of electric buses (e-buses) equipped with vehicle-integrated photovoltaics (VIPV) to support the global transition toward zero-emission transportation. Aligned with international climate goals like the Paris Agreement and the European Union's 2050 carbon neutrality target, the research assesses ten 12-meter and 18-meter commercial e-bus models from various manufacturers. A computationally efficient methodology is employed, utilizing PVGIS-derived global horizontal irradiation (GHI) data specifically for Gümüşhane, Türkiye. The evaluation framework simultaneously analyzes several critical indicators: PV-based range extension, CO2 emission reduction, grid-connected charging frequency, battery depth of discharge (DoD), and payback period (PP). Findings from the baseline scenario—assuming 50% usable roof area and 22% module efficiency—reveal that e-buses can achieve a daily PV range of up to 19.16 km and annual CO2 emission savings ranging from 1709 to 2596 kg. Additionally, VIPV integration effectively mitigates battery aging by providing a peak DoD reduction of 6.91% and decreases grid-charging dependency by up to 5% during high-irradiance months. In an optimistic scenario featuring 80% usable roof area and 30.1% efficiency, the daily PV range reaches a maximum of 46 km, while the reduction in grid-charging frequency improves significantly to 21.16%. Economic assessments, including Net Present Value (NPV) analysis, confirm the investment's viability, with PPs as short as 3.76 years. This research provides a comprehensive, scalable framework and practical guidance for municipalities and fleet operators to enhance the sustainability of public transport (PT) through solar energy integration.

  • 
  • 
  • 
  • 
  İncele
• MakaleYalnız künye2025/r/gumushane/14363
  Performance assessment of solar-powered electric vehicles: Importance of maximum power point tracking, range enhancement and charging frequency analysis under various operating and irradiance conditions

  Başoğlu, Mustafa Engin

  Decarbonizing the transportation sector is becoming a crucial focus in the 21st century. As the popularity of internal combustion engine vehicles declines, the adoption of hybrid and electric vehicles (EVs) is significantly increasing. One of the main challenges for battery-powered vehicles, aside from safety concerns, is the limited driving range and frequent charging requirements. Integrating a photovoltaic (PV) module onto a vehicle's surface enables continuous battery charging during both motion and stationary periods, thereby extending the vehicle's range on a full charge. This study presents two main contributions: a modified 0.8VOC-based maximum power point tracking (MPPT) method for fast-changing irradiance conditions for flat-roof vehicle-integrated PV (VIPV) systems, and a long-term simulation analysis of classical MPPT methods using two new indicators for range extension and vehicle charging frequency variations under different irradiance profiles. The proposed MPPT method yielded superior energy performance, achieving 16–25 % higher energy generation compared to both the incremental conductance (IC) algorithm and the variable step-sized (VSS) perturb and observe (P&O) method. Long-term simulations conducted for three EV models demonstrated a daily driving range extension of 2–7 km with an 185W PV module, along with up to a 19 % reduction in charging frequency, depending on the battery capacity and vehicle models.

  • 
  • 
  • 
  İncele
• MakaleAçık Erişim2024/r/gumushane/11525
  Atomic Comagnetometer Gyroscopes for Inertial Navigation Systems: A Review

  Karabi̇Naoğlu, Murat Salim; Çakir, Bekir; Başoğlu, Mustafa Engin

  In recent years, developments in quantum sensing, laser, and atomic sensor technologies have also enabled advancement in the field of quantum navigation. Atomic-based gyroscopes have emerged as one of the most critical atomic sensors in this respect. In this review, a brief technology statement of spin exchange relaxation free (SERF) and nuclear magnetic resonance (NMR) type atomic comagnetometer gyroscope (CG) is presented. Related studies in the literature have been gathered, and the fundamental compositions of CGs with technical basics are presented. A comparison of SERF and NMR CGs is provided. A basic simulation of SERF CG was carried out because of its high theoretic bias stability limit. Besides, some highly critical challenges for CGs were examined and reported with compensation methods. The objective of this review is to offer a guide for researchers to develop high-precision atomic gyroscopes and to encourage further research.

  İncele
• BildiriYalnız künye2023/r/gumushane/12725
  Analysis Of The Performance Of The Distributed Maximum Power Point Tracking In Building Integrated Photovoltaic Systems

  Basoglu, Mustafa Engin

  Building-integrated/applied photovoltaic (PV) systems have been widespread recently in terms of electrical energy generation in buildings. These systems are applications with much lower power than land type large-scale systems, addressing the area/building where they are installed rather than centralized production. In this framework, maximum power point (MPP) tracking (MPPT) approaches at module level and sub-module level, balcony railing, Carport or solar tile etc. will be investigated in terms of building integrated PV systems (BIPV). Solar panels act as a building material, insulation material and energy generator in BIPV applications. In building-applied (BAPV) examples, the solar panel is mounted on the building. However, there is no difference between BIPV and BAPV in terms of electrical model. A unique method will be developed for MPPT at module level and sub-module level for such applications. Depending on the power processing strategy in the optimizer power stage, amplifier, synchronous reducer or bidirectional differential power processing topologies will be examined and the most suitable power converter for the module and sub-module level will be determined. Technically, comparisons of the performances of MPPT strategies were made in the MATLAB/Simulink program at the central, module level or sub-module level, and it was shown that the power that can be obtained from the PV module or sub-module increases with the MPPT at the module and sub-module level.

  • 
  • 
  İncele
• MakaleAçık Erişim2022/r/gumushane/17363
  Çift Eksen Güneş Takip Sistemi Geliştirilmesi

  Basoglu, Mustafa Engin; Ünsal, Recep; Çağşırlıoğlu, Gökhan

  Yenilenebilir enerji kaynakların efektif kullanımı günümüzde çok önemlidir. Çünkü enerji kaynakları sınırlıdır ve yenilenebilir enerjiden maksimum düzeyde istifade etmek gereklidir. Bu çalışmada güneş enerjisinden olabilecek maksimum enerjiyi elde etmek için fotovoltaik sistemde çift eksenli güneş takip sistemi uygulaması gerçekleştirilmiştir. Güneş takip sisteminde mekanik düzende dikey tutucu olarak kestamit malzemesi, güneş paneli tutucu ise demir kullanılmıştır. Güneş panelinin 4 köşesinde toplam 4 adet LDR kullanılarak Arduino tabanlı dikey ve yatay eksende güneş takibi gerçekleştirilmiştir. Sistemde kullanılan güneş paneli gücü 45W olup, yatay eksende redüktörlü DC motor, dikey eksende lineer DC motor kullanılmıştır. Gerçekleştirilen uygulama sonucunda hassas güneş takibi yapan bir sistem gerçekleştirilmiş ve statik bir PV sisteme göre daha yüksek verim elde edilmiştir.

  • 
  • 
  İncele
• MakaleAçık Erişim2022/r/gumushane/17240
  Photovoltaic Mobile Charging System Design (Solar Pole) - in Gümüşhanevi Campus of Gümüşhane University

  Basoglu, Mustafa Engin; Ertuğrul, Murat Han; Çayır, Muzaffer; Şen, Nurgül

  The decrease in fossil-based resources, the pollution of the environment and the threat of sustainability constantly increase the interest in renewable energy sources. Solar energy is one of the leading renewable energy sources due to its large capacity. Today, solar energy appears in many applications. In this study, a photovoltaic-based solar pole design has been realized and a prototype that can be applied almost anywhere in open-air conditions has been produced. The prototype produced was tested and installed at Gümüşhane University's Gümüşhanevi Campus. The prototype mobile phones produced have a fast charging feature with 5V-2A. In future studies, it is planned to provide the solar tracking feature to the photovoltaic (PV) panel in the system, and it is aimed to bring such systems to the campus in general.

  • 
  • 
  İncele
• Derleme MakaleYalnız künye2022/r/gumushane/14438
  Comprehensive review on distributed maximum power point tracking: Submodule level and module level MPPT strategies

  Başoğlu, Mustafa Engin

  Maximum power point tracking (MPPT) procedure in photovoltaic (PV) systems can be realized with many different methods. Especially in arrays consisting of PV modules (PVMs) connected in series; the maximum power point (MPP) may change due to partial shading conditions (PSC), aging, degradation, fabrication production differences etc. In addition, even in small power systems containing a single PVM, the difference in shading and irradiation between submodules affects the maximum power potential of the PVM. In this study, power electronics-based power processing methods in distributed MPPT (DMPPT) systems are emphasized. Power electronics-based hardware MPPT solutions are examined in two groups as full power processing (FPP) and differential power processing (DPP). In addition, commercially available power optimizers have been examined under many criteria. The literature on the subject has been analyzed in a broad perspective, and it has been comprehensively evaluated according to criteria such as power processing level, converter configuration, MPPT algorithm, MPPT application level and control approaches. This study is an important guide for scientists and hardware engineers doing academic studies on the subject. This study, which examines the topologies and control approaches used in application-oriented studies, has the feature of triggering future studies. The features that commercial power optimizers should have and the examination of the products in the market within the framework of some criteria is one of the original aspects of the study. It is expected that this study will contribute to the PV industry in building applied and building integrated studies, where extreme shading scenario occurs.

  • 
  • 
  İncele
• MakaleAçık Erişim2022/r/gumushane/13329
  Comparison of deep learning and regression-based MPPT algorithms in PV systems

  Karabi̇Naoğlu, Murat Salim; Çakir, Bekir; Başoğlu, Mustafa Engin; Kazdaloğlu, Abdülvehhab; Güneroğlu, Aziz

  Solar energy systems (SES) and photovoltaic (PV) modules should be operated at the maximum power point (MPP) to achieve the highest efficiency in the energy generation processes. Maximum power point tracking (MPPT) applications using conventional methods may not be able to follow the global MPP (GMPP) of the PV system under changing atmospheric conditions and they could oscillate around the local MPP. In this study, a machine learning and deep learning (DL) based long short-term memory (LSTM) model is proposed as an innovative solution for MPPT. Contrary to the traditional MPPT applications using current and voltage sensors, the output resistance of the PV module estimation was made by using environmental parameters (such as temperature and radiation) and artificial intelligence algorithms in this study.The LSTM model was compared with artificial neural networks (ANN) and regression methods regarding mean square error (MSE), root mean square error(RMSE) and mean absolute error (MAE) parameters. It has been determined that the LSTM model has a better performance and could more successfully follow MPP compared to the other methods. Finally, after the comparison with the ANN method, it is proved that LSTM gives 37%, 21%, and 31% more successful MSE, RMSE, and MAE results, respectively.

  • 
  • 
  • 
  İncele
• MakaleAçık Erişim2021/r/gumushane/17652
  Submodule Based MPPT with Synchronous Buck Converter Under Dynamic Partial Shading Conditions

  Basoglu, Mustafa Engin

  In order to obtain more power from photovoltaic (PV) modules under mismatching operating conditions, the submodule-based MPPT technique is an important solution. In this technique, since the power-voltage (P-V) curve of a submodule cannot be multi-peaked, the maximum power point (MPP) tracking (MPPT) is easily achieved through a DC-DC converter connected to each submodule. Since the P-V curve cannot be in a multi-peaked form, the maximum power can be obtained with a simple MPPT algorithm. For this reason, perturb & observe (P&O) algorithm can be chosen. In this study, the behaviour of a submodule-based MPPT with synchronous buck converter (SBC) is investigated for dynamic shading conditions. In addition, submodule-based MPPT and module-based MPPT technique were compared and the comparison was confirmed by simulation studies that submodule-based MPPT performed better. In this context, simulation studies were carried out for different shading conditions. According to the simulation results, the submodule- based MPPT approach achieves greater efficiencies to the module-based MPPT. In some simulations, when the module-based MPPT technique is used, the operation at the local MPP has been realized. In such cases, more advanced algorithms are needed. However, a simple algorithm is sufficient in submodule-based MPPT. The only disadvantage of this MPPT is the high hardware cost. However, the increase in efficiency obtained is at a level that can easily tolerate this cost.

  • 
  İncele
• MakaleYalnız künye2021/r/gumushane/17484
  Comparisons of different Maximum Power Point Tracking Strategies with Zeta Converter

  Basoglu, Mustafa Engin

  Maximum power point tracking (MPPT) strategy is one of the major parameters affecting efficiency in photovoltaic (PV) systems. In this paper, distributed MPPT approaches are compared with central mode MPPT. Advantages and disadvantages of submodule level MPPT technique and module level MPPT approach are shown with simulation studies. Comparisons are made with incremental conductance (IC) algorithm. In this context, non-isolated zeta converter is used as a power-processing unit. Effect of the MPPT strategy on the collected energy performance is observed by simulation studies performed in MATLAB/Simulink. It is clear by these studies that energy capture is bigger in submodule level MPPT strategy and module level MPPT with respect to central mode which is seen by simulations. However, central mode MPPT offers cost effective solution because of the low hardware requirements.

  İncele