İlgi alanları

Sürdürülebilir Kalkınma Amaçları

• 3

• Derleme MakaleYalnız künye2026/r/gumushane/13441
  Sustainable Mining: Environmental Challenges, Mine Tailings Management and Technological Innovations

  Orak, Mürsel

  Mining provides essential raw materials for global economic development; however, it is also associated with significant environmental impacts including land degradation, water contamination, and the generation of large volumes of mine tailings. Sustainable mining has emerged as a strategic framework aimed at balancing economic benefits with environmental protection and social responsibility. This study presents a comprehensive review of sustainable mining practices with particular emphasis on environmental impacts, mine tailings management strategies, acid mine drainage mitigation, and innovative technologies such as cemented paste backfill (CPB). In addition, the role of circular economy approaches, digital mining technologies, and mine closure strategies in improving sustainability performance is discussed. The findings indicate that integrating advanced tailings management strategies and technological innovations can significantly reduce environmental risks and enhance the long-term sustainability of mining operations.

  • 
  İncele
• BildiriYalnız künye2023/r/gumushane/11479
  IMPORTANCE OF STATIC TESTS FOR THE PREDICTION OF AMD POTENTIAL OF CEMENTED PASTE BACKFILL

  Cihangir, Ferdi; Koc, Ercument; Orak, Mursel; Deveci, Taha Yavuz; Ercikdi, Bayram

  Cemented paste backfill (CPB) is an engineering mixture of mine tailings, cement and water. Tailings can commonly contain sulphidic minerals. In this case, acid mine drainage (AMD) may occur due to the oxidation of sulphidic minerals present in the body of the CPB. In general, AMD lowers the pH of the medium and water environment and may cause heavy metal release. Therefore, AMD potential is an important parameter to be considered with regard to environmental aspect. Static tests are widely used to determine the AMD potential of sulphidic materials. When neutralization capacity is higher than the acid generation potential, tailings can be safely stored from an environmental point of view. In this study, AMD potential of CPB material produced from sulfur-containing fine tailings is investigated. In this scope, a static modified ABA test was performed on fine sulphidic tailings (TA) and CPB produced from the same sulphidic tailings+7%wt. SR5 cement+water for the first time. Findings suggests that the CPB material had a lower AMD potential (~10%) compared to the tailings. Acid generation capacity of both tailings and the CPB was found to be dominant due to the high sulphide content (~30%wt. and ~28%wt.), respectively. However, CPB was observed to maintain its structural integrity and did not release acidic water for at least 40 weeks. This study showed that a well-designed CPB can be effectively used as an environmentally friendly mine tailings management method.

  • 
  İncele
• MakaleYalnız künye2021/r/gumushane/14629
  Extraction of Metals from Scrap Marble Cutting Segments in Nitric Acid Solutions

  Celep, Oktay; Orak, Mürsel; Yazici, Ersin Y.; Deveci, Hacı

  Extraction of cobalt, copper, and silver from scrap saw-blade segments using nitric acid solutions (0.1–0.4 M, 20–60°C) were investigated using response surface methodology. Extraction of cobalt and iron was more extensive than copper and silver, i.e., 35.7–96.2% Co and 72.6–100% Fe versus 8.50–35.4% Cu and 8.11–22.5% Ag. Statistical analysis of the experimental data has shown that increasing the acid concentration or temperature enhances the rate and extent of leaching of metals. Under suitable conditions, almost complete leaching of cobalt (99.9%), as well as high extractions of copper (95.9%) and silver (94.9%), were achieved. The activation energy, calculated to be 40.3 kJ/mol, indicates that nitric acid leaching of these metals occurs as a chemically controlled reaction. These findings have demonstrated that nitric acid as an effective oxidant/leaching agent could be suitably used for the extraction of cobalt, copper, and silver from scrap segments.

  • 
  İncele