Sürdürülebilir Kalkınma Amaçları

• 1
• 1

Yazarlar

• Külekçi, G.(1)
• Külekçi, Gökhan(1)
• Yilmaz, A.O.(1)
• Çullu, M.(1)

• MakaleYalnız künye2023Scopus SJRQ3/r/gumushane/12741
  Mechanical Properties of Shotcrete Produced with Recycled Aggregates from Construction Wastes

  Külekçi, G.; Çullu, M.; Yilmaz, A.O.

  Abstract: This study examines the usability of concrete wastes generated from buildings demolished for various reasons in shotcrete. The strength properties of shotcrete produced from recycled aggregates (RA), cylinder specimen and plate specimen were tested. it was observed that as the ratio of RA used instead of natural aggregate increases, the strength of the cylinder specimen decreases, ultrasonic pulse velocity increases. The toughness value has increased in the concrete samples prepared by replacing the natural aggregate with 50% or more RA. It was observed that the fiber amount and load carrying capacity were proportional in fiber reinforced plates prepared using RA. As a result, it has been observed that the interaction of RA with fiber is positive and it can be used in shotcrete. It has been revealed that RA can contribute to the reduction of environmental pollution caused by construction and wreckage wastes and can be presented as an alternative to natural aggregate.

  • 
  AtıfScopus7·WoS6·OpenAlex10

  İncele
• MakaleAçık Erişim2021Scopus SJRQ3/r/gumushane/14612
  Comparison of field and laboratory result of fiber reinforced shotcrete application

  Külekçi, Gökhan

  Synthetic fibers, which have become one of the main components of shotcrete, have been studied by many researchers in the laboratory environment. Unfortunately, the results obtained as a result of these researches are not suitable for underground chimneys due to the differences in ambient conditions and application differences. In this study, it is aimed to compare the results of the experiment samples prepared and kept in the laboratory with the mechanical properties of the shotcrete applied in underground conditions. For this purpose, keeping the slump and cement proportions constant, 35 cubic samples were prepared using 2 and 6 kg synthetic fiber for 1 m3 in the laboratory, and 30 cylinder samples and 6 plate samples were prepared for underground. While mechanical experiments were carried out on prepared cube and cylinder samples, the EFNARC plate test and freeze-thaw test were carried out on plate samples. It was observed that the set accelerator made a significant increase in resistance at the end of the 28 days and that the resistance of the samples prepared with polyester fibers in the laboratory environment were very high. As a result of the EFNARC panel tests performed, it was determined that the energy absorption of synthetic fibers increased with fiber amount. Thanks to this study, the energy absorption of the synthetic fiber used has been measured, and the reliability and practicality of the experiments carried out in the laboratory have been increased by evaluating the field conditions and laboratory conditions.

  • 
  AtıfScopus13·WoS12·OpenAlex11

  İncele