Yazarlar
Yayınlar
- MakaleAçık Erişim2017Scopus SJRQ3The importance of amount of settlement in determining the bearing capacity of soils
Alemdaǧ, Selçuk; Cinoǧlu, Aslihan; Gacener, Elif
In this study, it is aimed to determine safe bearing capacity of soils, which are out cropped around Tamzi and Akcakale villages located in Gumushane, providing allowable settlement conditions for an optimum foundation design. To define the geotechnical properties of soils, three trenches were dug and two seismic refraction with two Multichannel Spectral Analysis of Surface Waves (MASW) were carried out in each research area. Sieve analyses, shear box tests, triaxial compression tests were carried out on disturbed and undisturbed samples taken from the trenches. Seismic velocities of the soils are determined by seismic refraction and MASW methods. While determining the safe bearing capacity; the equations proposed by Terzaghi, Meyerhof, Kurtuluş, Tezcan and Özdemir, Türker, Keçeli were used and the obtained safe bearing capacity values were compared to each other. After, the soils were modeled numerically by using finite elements method and safe bearing capacities providing allowable settlement conditions were determined. According to the results, safe bearing capacity values obtained from empirical equations are not satisfactory to have an optimum foundation design. For the optimum foundation design, safe bearing capacity should be accepted as 190 kN/m2 for clayey soil (CL) and 485 kN/m2 for the clayey sand (SC).
AtıfScopus1OpenAlex4İncele - MakaleYalnız künye2011Scopus SJRQ1The Sumela Monastery slope in Maçka, Trabzon, Northeast Turkey: Rock mass properties and stability assessment
Gelişli, Kenan; Şeren, Aysel; Babacan, Ali Erden; Çataklı, Aycan; Ersoy, Hakan; Kandemir, Raif
In 2001, rock falls occurred on the southern slope of the Sumela Monastery, which was built on a cliff in Trabzon, north east Turkey, and is visited by many tourists. Considering the steepness of the slope and difficulty of access, rock classifications were made based on seismic wave velocity, rock mass quality (Q), rock quality designation (RQD) and rock mass rating (RMR). The results indicated extremely poor to very poor rock in the cracked, fractured and weathered parts and poor to fair rock in the intact parts of the monastery slope. As a consequence, rock fall, slide and rolling may occur from time to time. These constitute a hazard to the facilities of the monastery and access paths. It is recommended that cracked areas are strengthened with cement-based materials, that accumulated rocks are removed, and that retaining walls are constructed on solid rock around the unstable rock blocks.
AtıfScopus13WoS8OpenAlex12İncele