Sürdürülebilir Kalkınma Amaçları

• 1
• 1
• 1

Yazarlar

• Erdogdu, Ferruh(1)
• Gülen, Jale(1)
• Karpuz, Ömer(1)
• Liu, Shuxiang(1)
• Ozturk, Samet(1)
• Tasci, Caner(1)

• MakaleAçık Erişim2026Scopus SJRQ3/r/gumushane/13890
  A concise approach for interpreting the removal kinetic of 2,4-D by carbonized peanut shell

  Gülen, Jale; Karpuz, Ömer

  The present study displays the adsorption characteristics of dichloro phenoxy acetic acid (2.4-D) on biomass-based peanut shell (BPC) carbon. Experiments were conducted by varying some parameters like concentration, pH, and temperature. 2,4-D adsorption uptake was increased from 0.504 to 3.826 mg/g with rising concentration from 1 µg/mL to 5 µg/mL and giving the highest adsorption at acidic pH. 1.605 mg/g uptake was obtained at pH 2.7. The data were in good harmony with Langmuir, Freundlic, Dubinin-Radushkevich (DR), and Generalized isotherms. The monolayer adsorption capacity was found as 42.62 ± 0.3257 mg/g. The kinetic was governed by the first-order kinetic. Various kinetic models were employed and particle diffusion was predominated for 2,4-D adsorption. Thermodynamics were explained in detail. The mean adsorption energy (E) was shown by the physical sorption, and Gibbs energy was the indicator of the spontaneous nature of the adsorption. Standard enthalpy, entropy, and Gibbs values were recorded as 5.064 ± 139.84, 18.849 ± 0.148, and 0,7414 ± 0.0943 J/mol. The results showed that BPC was an eco-friendly and cost-effective material.

  • 
  • 
  AtıfScopus1·WoS2·OpenAlex3

  İncele
• MakaleAçık Erişim2024Scopus SJRQ1/r/gumushane/14122
  Improving radio frequency heating uniformity in peanuts: Effects of packaging geometry, electrode gap, particle size and interlayer displacement process

  Tasci, Caner; Liu, Shuxiang; Erdogdu, Ferruh; Ozturk, Samet

  This study aimed to assess the impact of various processing parameters including electrode gap, packaging geometry, and particle size on the heating efficiency of radio frequency (RF) processing for peanut thermal decontamination. In addition, interlayer displacements were presented to evaluate the effect of the mixing on heating uniformity. Experimental studies were carried out using 3D-printed polylactic acid (PLA) containers (square, rectangular, and cylindrical) to place the peanut samples with particle sizes ranging from 0.71 to 2.00 mm at 100–140 mm electrode gaps. Temperature changes within the samples were monitored using fiber optic sensors and surface temperature distributions were determined with an infrared camera. Heating uniformity index (λ) was then calculated to assess the effects of RF processing conditions on RF heating uniformity. Results showed that the cylindrical container exhibited a more consistent and uniform heating profile (λ = 0.12) with 1.58 °C min−1 heating rate compared to other containers, and a single interlayer displacement between top and bottom layers further improved temperature distribution uniformity. Smaller particle sizes also led to faster heating rates from 1.71 to 1.55 °C min−1 with more uniform heating due to the reduced porosity within the particles with increased thermal conduction and electromagnetic energy absorption. This study presented valuable insights for developing an effective RF process as an alternative to conventional thermal treatments for decontamination of low-moisture, high-fat particulate foods. Industrial significance: This research presented an innovative approach applying RF heating for a possible decontamination process for peanut samples. The research tackled the growing worldwide consumer demand for food products to satisfy food safety regulations while peanuts were selected to demonstrate the process effect due to the recent food safety issues in peanut butter considering that a pre-process for decontamination would lead to a decrease in the resulting safety issues.

  • 
  AtıfScopus21·WoS20·OpenAlex20

  İncele