Yazarlar
- Topal, Umut(2)
- Uzman, Ümit(2)
- Topal, U.(1)
- Uzman, Ü.(1)
Yayınlar
- MakaleAçık Erişim2010Effect of rectangular/circular cutouts on thermal buckling load optimization of angle-ply laminated thin plates
Topal, Umut; Uzman, Ümit
This paper deals with thermal buckling load optimization of symmetrically laminated angle-ply thin plates with centrally located different cutouts subjected to a uniform temperature load rise. The optimum results are given for maximum buckling temperature and the fibre orientation is adopted as design variable. The results are obtained for the various cutout geometries such as rectangle and circle. The modified feasible direction (MFD) method is used for the optimization routine. Therefore a program based on FORTRAN is used. Finally, the effects of cutout areas, plate aspect ratios and boundary conditions on the optimum results are demonstrated.
- MakaleYalnız künye2008Strength optimization of laminated composite plates
Topal, Umut; Uzman, Ümit
A procedure to select the optimum fiber orientations and determine the maximum load-bearing capacity of the simply supported symmetrically laminated plates combined the bidirectional tension loads and bending moments is described. The fiber orientation is considered a design variable. The optimization problem consists of two stages. The objective of the first stage is to maximize the strength of the laminated plates by determining the fiber orientations optimally while the objective of the second stage is to maximize each of the bidirectional tension loads and bending moments subject to the Tsai-Wu failure criterion for the optimum fiber orientations obtained from the first stage. The modified feasible direction method (MFD) is used as an optimization procedure. Therefore, a FORTRAN program is used for the finite element analysis and optimization routine. Also, the optimum fiber orientations are obtained using the golden section (GS) method to compare the results. Finally, the effect of the different plate aspect ratio, width-to thickness ratio, the uncertainties in the material properties and the uncertainties in the fiber orientations on the optimum results is investigated and the results are compared.
- MakaleYalnız künye2008Thermal buckling load optimization of laminated composite plates
Topal, U.; Uzman, Ü.
In this study, the applicability of the Modified Feasible Direction (MFD) method on the thermal buckling optimization of laminated plates subjected to uniformly distributed temperature load is investigated. The objective function is to maximize the critical temperature capacity of laminated plates and the fiber orientation is considered as design variable. The first-order shear deformation theory is used in the mathematical formulation. For this purpose, a program based on FORTRAN is used for the optimization of laminated plates. Finally, the effect of aspect ratio, antisymmetric lay-up, boundary condition, material anisotropy, ratio of coefficients of thermal expansion, and hybrid laminates on the results is investigated and the results are compared.