Sürdürülebilir Kalkınma Amaçları
Yazarlar
Yayınlar
- MakaleAçık Erişim2016Use of polyvinyl chloride (PVC) powder and granules as aggregate replacement in concrete mixtures
Bolat, Hakan; Erkus, Pinar
Concrete is one of the materials in which polymer wastes are utilized. Generally, these wastes are added at specific rates in scientific studies but an important problem of waste polymers is size irregularity. Even when consistent dosage rates are used, variations in polymer size can lead to variability in the physical and mechanical properties of the concrete produced. The aim of this study is to determine physical and mechanical properties of polyvinyl chloride (PVC)-containing concretes. In order to produce normal and high strength concretes, 10%, 20%, and 30% replacement ratios of PVC powder and granules by volume of aggregate are used. Slump, fresh and hardened densities, compressive strength, capillary water absorption, and abrasion were tested on all concrete types. As the PVC ratio increases, important changes are seen in all physical and mechanical concrete properties. The unit weights of the 10%, 20%, and 30% replacement PVC powder concretes are lower by ∼4%, 8%, and 13%, respectively, as compared to the reference mixtures, and the replacement PVC granule concretes are lower by ∼2%, 4%, and 7%. Compressive strength test results showed similar trends. As PVC replacement increases, the capillary water absorption decreases between 10% and 50%, and abrasion decreases between 27% and 77%.
- MakaleYalnız künye2011Abrasion Resistance of Cement Mortar with Different Pozzolanic Compositions and Matrices
Yetgin, Sukru; Çavdar, Ahmet
Abrasion of concrete occurs due to scraping, rubbing, skidding, or sliding of objects on its surface. The abrasion resistance of concrete is influenced by a number of factors, such as compressive strength, surfacing finish, aggregate properties, types of hardeners, and curing. The main objective of this study is to determine the effects of the pozzolanic compositions and matrix structure (or voids) on the abrasion resistance of cement mortars. In this study, the mortars produced with cement samples with seven different compositions and varied with an air-entraining agent were subjected to the abrasive effects. Several examples of mortars were evaluated using samples cured for six different periods throughout 1 year. This study is supported by thin section investigations, in addition to being subjected to the basic tests, such as compression, flexure, and abrasion. The Bohme apparatus was used during abrasion tests. To summarize the most important findings from this study, a compact cement matrix is more effective against abrasive effects than mineral additives.
- MakaleYalnız künye2010Investigation of abrasion resistance of cement mortar with different pozzolanic compositions and subjected to sulfated medium
Çavdar, Ahmet; Yetgin, Şükrü
The durability phenomenon for concrete, or cement mortar, has gained attention recently as one of the important mechanical properties. It can be described as concrete's resistance to the destructive influences of a medium containing acid, sulfate and/or various chemicals and mechanical effects, like abrasion. Most of the studies attempted to improve these individual properties in concrete. However, concrete can be subjected to two or more of these effects simultaneously. In this study, the mortars produced with cement samples having seven different compositions and varied with an air-entraining agent were subjected to the influence of sulfate and abrasive effects simultaneously. In this study, several examples were evaluated using samples cured for six different periods throughout one year. This study is supported by thin section and XRPD investigations, in addition to being subjected to the basic tests, such as compression, flexure and abrasion. If the most important findings obtained from the study are summarized, it is seen that a compact cement matrix is more effective against both sulfate and abrasive effects than mineral additives. The mortars subjected to coupled (sulfate and abrasive) effects show less durability if compared to ones cured in water and later abraded.