Sürdürülebilir Kalkınma Amaçları
Yazarlar
Yayınlar
- MakaleYalnız künye2025Assessment of Seismic Responses of Square-Hollow-Section Joints in a Lattice Girder with Soil-Structure Interaction
Ozturk, Kasif Furkan; Ozyurt, Emre; Araz, Onur; Cakir, Tufan
The fixed base approach is widely used to obtain the seismic behaviour of Square Hollow Section (SHS) joints in a lattice girder. However, in some cases where soil-structure interaction (SSI) can be relatively significant, this approach may result in incorrect acquisition of the natural periods and dynamic responses of the lattice girders using welded tubular joints. This situation may negatively affect the safety of the structure by causing an underestimation of the dynamic loads acting on the structure. Therefore, this study evaluates the seismic behaviour of SHS joints in a typical lattice girder exposed to different ground motions considering SSI. A nonlinear finite element analysis software, Abaqus, performs the dynamic analyses considering six earthquake excitations with three different frequency contents (a ratio of peak ground acceleration (PGA) to peak ground velocity (PGV)) and four different soil types. After verifying the numerical model, it is determined that 3D solid elements should be used to capture the actual seismic behaviour of the tubular joints in a steel truss frame with or without SSI. A comprehensive parametric study is then carried out to evaluate the peak displacement and stress values on the SHS joints with and without SSI under different ground motions with different PGA/PGV ratios. The findings show that the stresses are concentrated around the column and bottom chord connection region. Besides, the SSI mechanism significantly affects the peak stress and displacement values of the SHS joints, especially in soft soil types. Furthermore, it is observed that the PGA/PGV ratio significantly changes the seismic responses of the steel truss frame.
- MakaleYalnız künye2023A Numerical Study to Evaluate the Changes in Dynamic Properties of Various Steel Truss Types Under Fire Conditions
Sibil, R.; Ozyurt, E.
This study numerically examines the changes in dynamic properties of fire-damaged steel trusses made of square hollow sections subjected to uniform and non-uniform heating scenarios. After verifying the numerical models at both ambient and elevated temperatures, a vast number of the simulations were analysed using non-linear finite element software to evaluate the effects of fire scenarios, truss types, and fire-damaged levels on the fire dynamic characteristics of square hollow section Warren, Howe, and Pratt trusses. The results indicated that the natural frequency of steel trusses significantly decreased as the fire-damaged level increased. In the case of local fire, the natural frequencies of the trusses began to drop suddenly at temperatures above 550 °C. Whereas the drop in the natural frequency of the uniformly heated trusses started at even much lower temperature levels. Moreover, the decrease in the natural fundamental frequencies of the uniformly heated trusses was lower than the reduction rate of the modulus of elasticity at high temperatures due to the large non-linear deformations. Since the modification of the stiffness of the truss by simply the reduction factor of the elastic modulus of the steel may be inappropriate to calculate the fundamental frequency of the trusses in the local and global fires, a new method was introduced to calculate the fundamental frequency value of the steel trusses in the fire.
- DergiInternational Journal of Steel Structures