Sürdürülebilir Kalkınma Amaçları
Yayınlar
- MakaleAçık Erişim2026A novel cloud point extraction method using a benzimidazole-based ligand for the preconcentration of toxic heavy metals in water and food samples
Ozdemir, Olcay; Duran, Celal; Mentese, Emre; Ozdes, Duygu
In the present research, a novel cloud point extraction (CPE) method was developed for the separation and preconcentration of toxic Cu(ii), Ni(ii), Pb(ii), and Cd(ii) ions in environmental water and vegetable samples, prior to their determination by flame atomic absorption spectrometry (FAAS). The ligand 2-(2-(4-fluorobenzyl)-1H-benzo[d]imidazole-1-yl)acetohydrazide (FB-BIAH) was employed for the first time as an analytical complexing agent for the aforementioned metal ions, and Triton X-114 (TX-114) was preferred as the nonionic surfactant. Within the scope of optimizing CPE conditions, experimental parameters, such as pH, FB-BIAH and surfactant amounts, and incubation temperature and time, as well as centrifugation speed and duration, were systematically investigated. The optimal conditions for the simultaneous quantitative recovery of analyte ions were established as pH 7.0, an FB-BIAH amount of 2.5 mg, a TX-114 quantity of 25 mg, an incubation temperature of 60 °C, and an incubation time of 30 min. Under optimal conditions, the proposed method was successfully applied to river water and seawater, as well as different vegetable samples such as lettuce, parsley, and pepper. The results obtained demonstrated that the analyte ions could be reliably determined in complex matrices and that the method exhibited high analytical performance. Due to its simplicity, rapid applicability, environmentally friendly nature, and cost-effectiveness, the proposed CPE-FAAS method represents a promising approach for the routine analysis of toxic heavy metals in environmental water and food samples. This journal is
- MakaleYalnız künye2026Valorization of tea industry waste into boric acid–activated carbon for phenol removal from aqueous solutions
Duran, Celal; Ozdes, Duygu; Ozdemir, Olcay; Onal, Yunus; Gundogdu, Ali
The tea industry generates substantial quantities of solid waste with limited high-value industrial applications. In this study, tea industry waste was converted into boric acid-activated carbon (BA–TAC) through a simple one-step chemical activation process and evaluated as an adsorbent for phenol removal from aqueous solutions. BA–TAC exhibited a mixed micro–mesoporous structure with a BET surface area of 592.59 m2 g−1. The adsorption performance was investigated as a function of solution pH, contact time, and initial phenol concentration. Adsorption kinetics were evaluated using pseudo-first order, pseudo-second order, Elovich, Avrami, and intraparticle diffusion models, whereas equilibrium data were analyzed using Langmuir, Freundlich, and Sips isotherms. Linear, pseudo-linear, and non-linear regression approaches were comparatively evaluated, demonstrating the limitations of conventional linearization and the superiority of direct non-linear regression. Moreover, the so-called linearized forms of multi-parameter models such as Sips are not truly linear because iterative parameter estimation remains necessary. The maximum experimental phenol adsorption capacity reached 101.80 mg g−1 despite the moderate BET surface area of BA–TAC. The experimentally determined natural pH and pHpzc values, together with the limited desorption efficiency, indicated that adsorption was governed predominantly by surface chemical interactions rather than electrostatic attraction alone. XPS analysis confirmed the incorporation of boron-containing surface functionalities, highlighting their contribution to phenol adsorption. Overall, this study demonstrates the successful valorization of tea industry waste into a functional boron-modified activated carbon while providing methodological guidance for reliable adsorption kinetics and equilibrium modeling, thereby supporting sustainable waste valorization.