Sürdürülebilir Kalkınma Amaçları
Yayınlar
- MakaleYalnız künye2017System identification of arch dam model strengthened with CFRP composite materials
Altunisik, A.C.; Gunaydin, M.; Sevim, B.; Adanur, S.
This paper presents the structural identification of an arch dam model for the damaged, repaired and strengthened conditions under different water levels. For this aim, an arch dam-reservoir-foundation model has been constructed. Ambient vibration tests have been performed on the damaged, repaired and strengthened dam models for the empty reservoir (0 cm), 10 cm, 20 cm, 30 cm, 40 cm, 50 cm and full reservoir (60 cm) water levels to illustrate the effects of water levels on the dynamics characteristics. Enhanced Frequency Domain Decomposition Method in the frequency domain has been used to extract the dynamic characteristics. The dynamic characteristics obtained from the damaged, repaired and strengthened dam models show that the natural frequencies and damping ratios are considerably affected from the varying water level. The maximum differences between the frequencies for the empty and full reservoir are obtained as 16%, 33%, and 25% for damaged, repaired and strengthened model respectively. Mode shapes obtained from the all models are not affected by the increasing water level. Also, after the repairing and strengthening implementations, the natural frequencies of the arch dam model increase significantly. After strengthening, between 46-92% and 43-62% recovery in the frequencies are calculated for empty and full reservoir respectively. Apparently, after strengthening implementation, the mode shapes obtained are more acceptable and distinctive compared to those for the damaged model.
- MakaleYalnız künye2017An Investigation of the Seismic Behaviour of an Ancient Masonry Bastion Using Non-Destructive and Numerical Methods
Altunisik, A.C.; Adanur, S.; Genc, A.F.; Gunaydin, M.; Okur, F.Y.
Determining the structural behavior of masonry structures is a challenge due to their lack of homogeneity. The seismic behavior of masonry structures is especially complex. The aim of this study was to examine the structural behavior of Zağanos Bastion using both experimental and numerical methods. The Operational Modal Analysis technique, including the Enhanced Frequency Domain Decomposition Method, and the Stochastic Subspace Identification Method were used to illustrate experimentally the dynamic characteristic of the bastion. A finite element model was developed using ANSYS software in order that the dynamic characteristics of the bastion, including natural frequencies and mode shapes, could be calculated numerically. Seismic analysis was carried out using the 1999 Kocaeli earthquake ground motion record to determine the linear and nonlinear seismic behavior of the bastion. The Turkish Earthquake Code and its general technical specifications were used to evaluate the seismic results. The results show that the maximum and minimum principal stresses exerted on the masonry components exceeded the code requirements at some points, but in general the requirements for the stresses were satisfied.
- MakaleAçık Erişim2015Static and dynamic responses of Halgavor footbridge using steel and FRP materials
Gunaydin, M.; Adanur, S.; Altunisik, A.C.; Sevim, B.
In recent years, the use of fiber reinforced polymer composites has increased because of their unique features. They have been used widely in the aircraft and space industries, medical and sporting goods and automotive industries. Thanks to their beneficial and various advantages over traditional materials such as high strength, high rigidity, low weight, corrosion resistance, low maintenance cost, aesthetic appearance and easy demountable or moveable construction. In this paper, it is aimed to determine and compare the geometrically nonlinear static and dynamic analysis results of footbridges using steel and glass fiber reinforced polymer composite (GFRP) materials. For this purpose, Halgavor suspension footbridge is selected as numerical examples. The analyses are performed using three identical footbridges, first constructed from steel, second built only with GFRP material and third made of steel-GFRP material, under static and dynamic loadings using finite element method. In the finite element modeling and analyses, SAP2000 program is used. Geometric nonlinearities are taken into consideration in the analysis using P-Delta criterion. The numerical results have indicated that the responses of the three bridges are different and that the response values obtained for the GFRP composite bridge are quite less compared to the steel bridge. It is understood that GFRP material is more useful than the steel for the footbridges.
- BildiriYalnız künye2011Ambient and forced vibration tests of a box girder concrete bridge model
Altunisik, A.C.; Bayraktar, A.; Sevim, B.
In this paper, ambient and forced vibration tests of a box girder laboratory con-crete bridge model are described to obtain experimental dynamic characteristics such as natural frequencies, mode shapes and damping ratios. The bridge deck consists of a main span of 3m and two side span of 1.5m each. The total bridge length is 6m and width of bridge is 0.60m. Heights of the bridge column and bridge deck are 0.80m and 0.30m, respectively. In the forced vibration tests, excitation of the bridge model is induced by an impact hammer. The ambient vibration tests are conducted under natural excitation such as wind and small impact effects. The Enhanced Frequency Domain Decomposition method in the frequency domain and the Sto-chastic Subspace Identification method in the time domain are used to extract the dynamic characteristics. At the end of the study, dynamic characteristics obtained from ambient and force vibration tests are compared with each other. It is seen that there is a good agreement be-tween both results and they are nearly closed to each other.