Sürdürülebilir Kalkınma Amaçları

• 2
• 2

• MakaleAçık Erişim2026/r/gumushane/13890
  A concise approach for interpreting the removal kinetic of 2,4-D by carbonized peanut shell

  Gülen, Jale; Karpuz, Ömer

  The present study displays the adsorption characteristics of dichloro phenoxy acetic acid (2.4-D) on biomass-based peanut shell (BPC) carbon. Experiments were conducted by varying some parameters like concentration, pH, and temperature. 2,4-D adsorption uptake was increased from 0.504 to 3.826 mg/g with rising concentration from 1 µg/mL to 5 µg/mL and giving the highest adsorption at acidic pH. 1.605 mg/g uptake was obtained at pH 2.7. The data were in good harmony with Langmuir, Freundlic, Dubinin-Radushkevich (DR), and Generalized isotherms. The monolayer adsorption capacity was found as 42.62 ± 0.3257 mg/g. The kinetic was governed by the first-order kinetic. Various kinetic models were employed and particle diffusion was predominated for 2,4-D adsorption. Thermodynamics were explained in detail. The mean adsorption energy (E) was shown by the physical sorption, and Gibbs energy was the indicator of the spontaneous nature of the adsorption. Standard enthalpy, entropy, and Gibbs values were recorded as 5.064 ± 139.84, 18.849 ± 0.148, and 0,7414 ± 0.0943 J/mol. The results showed that BPC was an eco-friendly and cost-effective material.

  • 
  • 
  İncele
• MakaleYalnız künye2018/r/gumushane/15277
  Adsorption of Cu(II) ions from aqueous solution by hazelnut husk activated carbon prepared with potassium acetate

  Imamoglu, Mustafa; Ozturk, Asuman; Aydın, Şeyma; Manzak, Aynur; Gündoğdu, Ali; Duran, Celal

  Hazelnut husk (HH), an agricultural waste, was converted to carbonaceous material by chemical activation using potassium acetate. The produced activated carbon (KAHHAC) was characterized by FTIR, SEM, N2 adsorption–desorption experiments, CHN elemental analysis, and determination of moisture, ash, and point of zero charge. KAHHAC was used for the batch adsorption of Cu(II) ions from aqueous solutions. Optimum pH and contact time were found to be 5.0 and 240 minutes, respectively. The adsorption equilibrium data were described well by the Langmuir equation providing 105.3 mg g−1 Cu(II) adsorption capacity. The pseudo-second-order model successfully described the kinetic of Cu(II) adsorption by KAHHAC. The adsorbed Cu(II) onto KAHHAC was completely desorbed by 0.5 M nitric acid. In conclusion, HH activated carbon (AC) produced by the potassium acetate activation method is a very useful and efficient sorbent material for the removal of Cu(II) from aqueous solution.

  • 
  • 
  İncele