Sürdürülebilir Kalkınma Amaçları

• 2
• 2

• MakaleYalnız künye2025Scopus SJRQ3/r/gumushane/12418
  Kinetics and Isotherm Evaluation for Adsorptive Removal of Anionic and Cationic Dyes from Aqueous Media by Sulfuric Acid-Modified Beech Sawdust

  Ozdes, Duygu; Ozeken, Sengul Tugba; Top, Yener; Kalkisim, Ozgun; Duran, Celal

  A novel and efficient adsorbent was prepared by modifying Fagus orientalis L. (beech) sawdust with H2SO4. The adsorption behavior of H2SO4-modified beech sawdust (SMBS) was investigated by batch experiments to offer a straightforward, inexpensive, and effective method for the retention of anionic and cationic model dyes, indigo carmine (IC) and methylene blue (MB), from wastewater. The experimental conditions were optimized by investigating the effects of the initial pH, initial concentrations of IC and MB dyes, dosage of SMBS, period of the contact, and the presence of salts in the aqueous media on the adsorptive performance of SMBS. The initial pH values of the aqueous solutions, from which IC and MB dyes will be removed, were optimized as 2.0 and 6.5 (natural), respectively. The optimum contact time for the adsorption of both dyes onto SMBS was determined to be 240 min. The mechanisms in the adsorption of IC and MB onto SMBS were investigated by evaluating the experimental data through different isotherm and kinetic models. The Langmuir isotherm model and pseudo-second order kinetic model performed well in explaining the mechanism of adsorption. Langmuir monolayer adsorption capacity of SMBS adsorbent was 38.85 mg g−1 for IC and 58.82 mg g−1 for MB. As a result, CMCP exhibited excellent performance in adsorbing organic pollutants, providing a low-cost and easily prepared alternative to other adsorbents found in the literature.

  • 
  • 
  İncele
• MakaleAçık Erişim2023Scopus SJRQ3/r/gumushane/12573
  Adsorption Behaviour of EDTA Modified Magnetic Fe3O4 Coated Brewed Tea Waste on Cr(VI) Removal

  Yilmaz Camoglu, Aslihan; Ozdes, Duygu; Duran, Celal

  The study focused on fabricating a novel magnetic Fe3O4 loaded and EDTA modified brewed tea waste (TW-Fe3O4-EDTA) as a cheap, environmentally friendly, and efficient adsorbent for the removal of Cr(VI) ions from aqueous medium in a batch system. Characterization of the prepared adsorbent was performed with different techniques. Adsorption experiments were implemented at different conditions including initial solution pH (1.0–7.0), equilibrium time (1–480 min), adsorbent dosage (1.0–20.0 g L–1), and initial Cr(VI) concentration (50–1000 mg L–1). The optimum adsorption performance was observed at pH 2.0 with 120 min of contact time. Maximum adsorption capacity of 114.9 mg g–1 was acquired for TW-Fe3O4-EDTA which is much higher than the recently developed adsorbents for Cr(VI) removal. Adsorption process was well explicated by Freundlich isotherm model and the adsorption rate is described in accordance with pseudo-second order kinetic model. It was observed that common salts did not have a notable influence on Cr(VI) adsorption. The results of the study indicated that TW-Fe3O4-EDTA can be applied as an effective adsorbent in heavy metal removal as an alternative to many expensive adsorbents available in the literature.

  • 
  • 
  AtıfScopus5·WoS5·OpenAlex5

  İncele