Sürdürülebilir Kalkınma Amaçları

• 2
• 1

• MakaleAçık Erişim2025/r/gumushane/14105
  Comprehensive study on the role of mycrisparite in enhancing strength, stability, and microstructural traits of self-compacting mortars

  Etli, Serkan; Yılmaz, Tekin

  The present research work aims at promoting the mechanical, durability and microstructure performances of self-compacting mortars (SCMs) and lessening the cement production-induced costs and environmental difficulties, by replacing binder with definite proportions (2.5–15%) of MS. To achieve these goals, the compressive and flexural strength (UCS, FS), freeze–thaw (F–T), sorptivity (Sp), MIP (tP, psD) and SEM tests were conducted on SCMs cured for diverse (7–90 days) ages. The outcomes unearthed that replacing binder with MS at small proportions boosted the UCS/FS performances of SCMs. These improvements in strength performance compared to MS-0 were more spectacular in MS-2.5, which produced higher UCS and FS of 8.6–21.0% and 10.0–25.7%, respectively at all curing ages. Similarly, the same SCMs, which betrayed lower UCS- (10.3 < 16.7) and FS-losses (31.6 < 41.0) than the control at the end of the 200-cycle F–T test, were able to remain more endurance against F–T deterioration. Besides, MS replacement up to 10% enabled the SCMs to exhibit lower tP- (up to 11.2%) and Sp values (up to 61.2%) by ameliorating the psD (refining the larger pores into finer pores). The current research can be consequently commented to provide more beneficial SCM design on both strength/stability and microstructure, and cost and environmental troubles for the building industry.

  • 
  • 
  İncele
• MakaleAçık Erişim2024/r/gumushane/11956
  Performance of different fibre types in alkaline-activated concrete produced with industrial wastes: volcanic rock powder and blast furnace slag

  Aksüt, Yavuz Selim; Külekçi, Gökhan; Çullu, Mustafa; Yetgin, Şükrü

  The objective of the study is to determine the effects of different fibre types and ratios on the mechanical and physical properties of alkali-activated concrete (AAC) and to optimise important properties such as workability, unit weight, water absorption, compressive strength, modulus of elasticity and abrasion resistance of these concretes. Concrete samples were produced using steel and polyester fibres at ratios of 0.25%, 0.50%, 0.75% and 1%. The fibre ratios were varied, and various tests were conducted to determine the mechanical and physical properties of the concrete samples. The experiments clearly revealed the effects of fibre types and ratios on the performance of concrete. These results clearly demonstrate the effects of different fibre types and ratios on the mechanical and physical properties of AACs. Particularly noteworthy is the water-retaining property of polyester fibres, their effect on workability and their enhancing effect on abrasion resistance. The effects of steel fibres on compressive strength and modulus of elasticity are more pronounced, but they may present disadvantages in terms of workability and abrasion resistance. It is observed that mixed fibre usage provides a good balance in some properties. This study provides a roadmap for evaluating sustainable material options in the concrete industry and guiding future research.

  • 
  İncele