Başyiğit, A.B.; Azakli, Z.; Gümrük, R.; Bican, O.

On the title page, author Dr. Aziz Bariş Başyipit should be spelled as Aziz Bariş BAŞYIĞIT. The original article has been corrected.

İncele

Savaşkan, Temel; Hekimoğlu, Ali Paşa; Azaklı, Zeki

The effect of isothermal exposure at temperatures from 100°C to 250°C for 8 hours on the structure, mechanical and tribological properties of the Zn – 40% Al – 2% Cu – 2% Si alloy produced by chill casting is studied. The isothermal treatment eliminates dendritic segregation yielding a coarse-grained polyhedral structure containing an α-solid solution with fine inclusions of silicon and zinc-rich phase. Increase in the temperature of the isothermal exposure leads to decrease in the hardness and strength and increase in the ductility, in the coefficient of friction and in the wear magnitude while reducing the average roughness of the alloy surface.

AtıfScopus5·WoS5·OpenAlex5

İncele

Başyipit, Aziz Bariş; Azakli, Zeki; Gümrük, Recep; Bican, Osman

The efficiency of thorough anodic oxidation of ASTM A356 aluminum alloy as an alternative to painting its surface is studied. Microstructure, phase composition, and microhardness of oxidized layers of various thicknesses (45, 65, 80 and 90 μm) are determined. Solid particle erosion tests are conducted in accordance with ASTM G76 and MIL STD 3033. It is established that with an increase in oxidized layer thickness aluminum alloy wear resistance is reduced and the surface roughness is reduced.

AtıfWoS1

İncele

Çelik, Ýlhan; Karakan, Mehmet

The structure and the wear resistance of commercial-purity titanium subjected to plasma nitriding followed by chemical deposition of a Ni – B coating are studied.

AtıfScopus4·WoS4·OpenAlex4

İncele