Sürdürülebilir Kalkınma Amaçları

• 8
• 2
• 2

• MakaleAçık Erişim2026/r/gumushane/10579
  Designing an industrial-scale radio frequency decontamination process for peanut butter

  Coskun, Eda; Ozturk, Samet; Tasci, Caner; Kahraman, Kubra; Liu, Shuxiang; Li, Rui; Wang, Shaojin; Mert, Behic; Marra, Francesco; Erdogdu, Ferruh

  Centers for Disease Control and Prevention (CDC) has reported outbreaks of Salmonella, particularly associated with low-moisture foods including peanut butter. Even though roasting is included along the processing line, the presence of these safety issues indicates the requirement of process following the packaging of the samples. Because of the lower thermal diffusivity of the peanut butter, a conventional thermal process is expected to be challenging with expected temperature non-uniformities. Therefore, radio frequency (RF) heating was considered in this study for thermal processing of peanut butter samples. For this purpose, a computational model was developed to determine the temperature change of peanut butter samples. Experimental studies for model validation were completed in a 10 kW - 27.12 MHz RF system at 3300 and 4000 V electrode potentials. Following the model validation, a comparison to the conventional thermal processing was presented, and industrial scale thermal processing studies were applied where up to 30 packaged samples were placed within the RF cavity. Process efficiency was determined with the process time decrease, temperature uniformity and decontamination effects. Science4Impact: This study demonstrated RF processing for an efficient thermal decontamination with uniform temperature distribution attained within the samples in an industrial scale process.

  • 
  İncele
• MakaleYalnız künye2026/r/gumushane/13516
  Radio frequency heating of whole peanuts for microbial safety and quality preservation using interlayer displacement under stationary and moving conditions: Effects of salt coating and natural skin on heating behavior

  Kahraman, Kubra; Tasci, Caner; Cakir, Elif Nida; Liu, Shuxiang; Soncu, Eda Demirok; Erdogdu, Ferruh; Ozturk, Samet

  This study aimed to improve the efficiency of a radio frequency (RF) heating system for pasteurizing whole peanuts while maintaining quality attributes using a stationary position or continuous movement. Heating efficiency was evaluated using commercially available roasted whole peanuts: salt-coated skin-on, unsalted skin-on, and unsalted peeled peanuts. To improve heating uniformity and ensure sufficient microbial inactivation of Salmonella enterica serovar Enteritidis PT30, a single interlayer-displacement strategy was applied in both stationary and continuous modes. Quality attributes including protein structure and fatty-acid profiles were assessed under the selected RF processing conditions. The RF system equipped with a conveyor belt was used to process peeled, unsalted peanuts inoculated with S. Enteritidis PT30 at approximately 7.9–8.5 log CFU/g. The three commercial peanut types exhibited differences in RF temperature distribution and heating uniformity, with salt-coated skin-on peanuts showing higher average temperature than unsalted peeled samples under the evaluated conditions. Continuous movement increased average temperature by approximately 10 °C but resulted in poorer heating uniformity, with a 3 °C higher standard deviation (SD). A single interlayer-displacement (overturning) step improved heating uniformity. This step increased Salmonella reductions from 3.41 to 4.77 log CFU/g under stationary processing and from 2.92 to 4.22 log CFU/g under continuous processing after 60 min of RF heating. The evaluated protein and lipid quality characteristics of unsalted peeled peanuts remained largely unchanged following RF processing. Overall, these findings demonstrated the potential of RF heating combined with interlayer displacement for microbial decontamination of unsalted peeled whole peanuts while maintaining the quality attributes evaluated in this study.

  • 
  • 
  İncele
• MakaleYalnız künye2026/r/gumushane/13443
  Freeze–ohmic thawing: A novel pretreatment strategy for cold-pressed black cumin oil production

  Tunç, Merve Tuğçe

  Cold pressing is one of the most preferred techniques for producing high-quality vegetable oils; however, its relatively low extraction efficiency remains a major limitation. Although ohmic thawing has been investigated as a rapid thawing technique for frozen foods, its application as a pretreatment prior to cold-press oil extraction has not yet been reported. Therefore, this study investigated, for the first time, the potential of freeze–thawing (FT) and freeze-ohmic thawing (FOT) as pretreatment strategies to enhance the recovery and preserve the quality of cold-pressed black cumin oil. FT and FOT pretreatments were applied for one, two, and three cycles before cold pressing, and the extracted oils were comparatively evaluated in terms of oil recovery, physicochemical properties, antioxidant characteristics, FTIR, aroma profile, and fatty acid composition. Both FT and FOT significantly improved oil recovery compared with the untreated control. While FT2 increased the extraction yield to 51.68 ± 2.21%, FOT2 achieved the highest extraction yield (63.11 ± 1.50%), corresponding to a 41% increase over the control. FTIR analysis confirmed the preservation of the characteristic functional groups of black cumin oil following both pretreatments. Thymoquinone was largely preserved, with only a slight reduction in FT2. Likewise, the fatty acid profile remained stable, with no significant differences (p > 0.05) among treatments. These findings demonstrate, for the first time, that freeze-ohmic thawing can be successfully employed as a pretreatment prior to cold pressing, substantially improving black cumin oil recovery while preserving its physicochemical, structural, and compositional quality.

  • 
  İncele
• MakaleYalnız künye2026/r/gumushane/12131
  Effects of thermosonication pretreatment on the physicochemical and sensory properties of grape juice obtained from Kösetevek grapes

  Zemzemoğlu, Tuba Eda Arpa; Kırıt, Burcu Dündar; Darıcı, Merve; Ağçam, Erdal; Cabaroğlu, Turgut

  Kösetevek grape is a significant indigenous black grape variety with colored pulp, grown in the Eastern Anatolia Region of Türkiye. Mash heating (MH) is commonly used in grape juice production. However, to better preserve phenolic, aroma, and nutritional components, Thermosonication (TS) process is utilized as an alternative technique. The aim of this study was to determine the effects of TS conditions on the physicochemical and sensory properties of grape juice obtained from Kösetevek grapes. Grape juice underwent TS at various temperatures and ultrasound energy density (UED) levels, followed by an optimization study using Response Surface Methodology (RSM). Grape juice samples were analyzed for total phenolic content (TP), total monomeric anthocyanins (TMA), antioxidant activity (FRAP and DPPH), polymeric color ratio (PCR), color difference (ΔE*), and extraction yield. The optimum TS conditions were determined as 801.99 J/g UED and 43.5 °C (desirability value = 0.595). Under optimal conditions, anthocyanin profiles were characterized by HPLC, aroma compounds were identified using GC–MS, and sensory properties were evaluated by descriptive analysis. TS resulted in a significant increase in TP and TMA content. The ΔE* value was lower, suggesting that the product's natural color was better preserved. TS enhanced the phenolic content and yield of the grape juice while also contributing to the preservation of color and sensory properties. TS juice contained the highest concentrations of aroma compounds, particularly C6 compounds and higher alcohols. This characteristic made TS more effective at preserving fresh aromas compared to MH, which generated cooked odors. Overall, TS has the potential to be applied as an alternative to or together with traditional thermal processes in industrial production.

  • 
  İncele
• MakaleAçık Erişim2024/r/gumushane/14122
  Improving radio frequency heating uniformity in peanuts: Effects of packaging geometry, electrode gap, particle size and interlayer displacement process

  Tasci, Caner; Liu, Shuxiang; Erdogdu, Ferruh; Ozturk, Samet

  This study aimed to assess the impact of various processing parameters including electrode gap, packaging geometry, and particle size on the heating efficiency of radio frequency (RF) processing for peanut thermal decontamination. In addition, interlayer displacements were presented to evaluate the effect of the mixing on heating uniformity. Experimental studies were carried out using 3D-printed polylactic acid (PLA) containers (square, rectangular, and cylindrical) to place the peanut samples with particle sizes ranging from 0.71 to 2.00 mm at 100–140 mm electrode gaps. Temperature changes within the samples were monitored using fiber optic sensors and surface temperature distributions were determined with an infrared camera. Heating uniformity index (λ) was then calculated to assess the effects of RF processing conditions on RF heating uniformity. Results showed that the cylindrical container exhibited a more consistent and uniform heating profile (λ = 0.12) with 1.58 °C min−1 heating rate compared to other containers, and a single interlayer displacement between top and bottom layers further improved temperature distribution uniformity. Smaller particle sizes also led to faster heating rates from 1.71 to 1.55 °C min−1 with more uniform heating due to the reduced porosity within the particles with increased thermal conduction and electromagnetic energy absorption. This study presented valuable insights for developing an effective RF process as an alternative to conventional thermal treatments for decontamination of low-moisture, high-fat particulate foods. Industrial significance: This research presented an innovative approach applying RF heating for a possible decontamination process for peanut samples. The research tackled the growing worldwide consumer demand for food products to satisfy food safety regulations while peanuts were selected to demonstrate the process effect due to the recent food safety issues in peanut butter considering that a pre-process for decontamination would lead to a decrease in the resulting safety issues.

  • 
  İncele
• MakaleYalnız künye2023/r/gumushane/12706
  Microwave decontamination processing of tahini and process design considerations using a computational approach

  Topcam, Huseyin; Coskun, Eda; Son, Ezgi; Kutuk, Dilay; Aytac, S. Aykut; Mert, Behic; Ozturk, Samet; Erdogdu, Ferruh

  Tahini, as a low moisture food product, is linked to several outbreaks of Salmonella recently even though a high temperature roasting (of sesame seeds) through its production is involved. Therefore, a final decontamination approach might be required for safety. Considering its higher oil content and lower thermophysical properties, conventional approaches are not easy to apply while preserving the quality attributes. Therefore, microwave heating was used for decontamination purpose. For this purpose, a computational mathematical model was developed first to determine the temperature distribution of tahini during microwave heating, and microbial inactivation studies for Salmonella enteritidis (ATCC 13076) were carried out. Changes in color and peroxide values were evaluated, and the experimentally validated model was further used to design an industrial process to achieve a 5-log cycle reduction as an efficient decontamination processing. The target temperature over 80 °C within the sample was demonstrated to achieve such a process, and industrial scale process conditions were presented for 262 kg/h process capacity.

  • 
  • 
  İncele
• MakaleAçık Erişim2022/r/gumushane/14516
  Continuous flow microwave processing of peanut butter: A (hypothetical) computational process design study with experimental validation

  Coskun, Eda; Ozturk, Samet; Topcam, Huseyin; Karatas, Ozan; Li, Rui; Wang, Shaojin; Mert, Behic; Erdogdu, Ferruh

  The increase in foodborne pathogen cases in low moisture foods has raised a significant food safety concern for food industry. One of the most significant outbreaks related with these food products was observed in 2008–2009 due to Salmonella problem in peanut butter. This issue was recently observed again for a multinational case. Challenges of conventional thermal processing due to the lower thermal conductivity – diffusivity value and higher viscosity, microwave (MW) heating might be an efficient processing while the non-uniform heating is a challenging drawback. Therefore, the objective of this study was to develop a mathematical model for MW processing of peanut butter and present industrial scale designs for continuous flow processing. For this purpose, the mathematical model was first experimentally validated using a lab-scale system and validated with experimental data. Following this, continuous flow MW process design studies were carried out with different holding tube configurations to obtain a temperature increase to enable decontamination and improve the temperature uniformity. These design simulations provided a better understanding to enhance the process efficiency of high viscosity low moisture peanut butter samples and for design and optimization of continuous flow MW processing.

  • 
  İncele
• MakaleAçık Erişim2022/r/gumushane/12824
  Microwave decontamination process for hummus: A computational study with experimental validation

  Son, Ezgi; Coskun, Eda; Ozturk, Samet; Bulduk, Kubra; Akpinar, Merve; Mert, Behic; Erdogdu, Ferruh

  There has been an increasing demand for healthy snacks, and hummus is preferred as a plant-based product its rich protein content. Its increased consumption, on the other hand, has raised food safety issues with linkages to Listeria outbreak and a recent Salmonella related recall. These were observed in ready-to-eat hummus and indicated the requirement of further processing. Conventional thermal processes might require longer times with negative impact on the quality due to the high viscosity of hummus with its solid-like rheology. For an efficient process design, microwave (MW) processing might be considered with its volumetric heating feature. Therefore, the objective of this study was to present MW application for a decontamination process for hummus. For this purpose, a computational model was developed to determine the temperature change during the process. This model was validated using the experimentally obtained temperature data from samples processed in polystyrene petri dishes (60 g – 8.5 cm in diameter and 1.2 cm in height) in a lab-scale MW system. Color changes were determined, and changes in its viscosity were used to understand the variation in the rheological attributes. Hummus samples were also inoculated with Salmonella cocktail to ≈7–8 log10 CFU/g prior to the MW process, and 70 W MW processing for 5 min (to average temperature of 95.3 °C) resulted in >4 log cycle reduction. Changes in color and rheological attributes were not significant with rather limited mass losses, and these indicated the possible MW processing for hummus decontamination with the need of designing an industrial scale processing.

  • 
  • 
  İncele
• MakaleYalnız künye2021/r/gumushane/14594
  Single-step recovery of pectin and essential oil from lemon waste by ohmic heating assisted extraction/hydrodistillation: A multi-response optimization study

  Tunç, Merve Tuğçe; Odabaş, Halil İbrahim

  The main products obtained from citrus wastes are pectin and essential oil. In this work, ohmic heating assisted extraction/hydrodistillation (OHAE/H) was applied for the simultaneous recovery of pectin and essential oil from lemon waste. Optimum OHAE/H conditions to maximize the yield of pectin and essential oil were determined with response surface methodology. Three independent variables, namely liquid to solid ratio (w:v), extraction/hydrodistillation time (min) and voltage gradient (V/cm) were varied to obtain maximum pectin and essential oil yield. Optimum OHAE/H conditions were determined as 8.7:1 liquid to solid ratio, 58.4 min extraction/hydrodistillation time and 14.2 V/cm voltage gradient. The predicted pectin and essential oil yields at optimum conditions were 16.58 and 3.62 g/100 g lemon waste, respectively. Data analysis showed that all of the independent variables significantly affected the pectin and essential oil yield. In the verification study, close agreement was found between predicted and experimental values. Conventional heating extraction/hydrodistillation (CHE/H) were conducted to evaluate the effectivity of OHAE/H. With OHAE/H process, the yields of the pectin and essential oil were significantly increased when compared to CHE/H. Limonene concentration of the essential oil produced with OHAE/H was higher than the essential oil produced by CHE/H. Results demonstrate that the single-step OHAE/H could be an effective method for simultaneous extraction and hydrodistillation of pectin and essential oils.

  • 
  İncele